From: Boris BREZILLON <b.brezillon@overkiz.com>
To: Nicolas Ferre <nicolas.ferre@atmel.com>,
Ludovic Desroches <ludovic.desroches@atmel.com>,
Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>,
Mike Turquette <mturquette@linaro.org>,
Andrew Victor <linux@maxim.org.za>,
Russell King <linux@arm.linux.org.uk>
Cc: linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org,
Boris BREZILLON <b.brezillon@overkiz.com>
Subject: [PATCH v2 22/42] ARM: at91: move sama5d3 SoCs to new at91 clk implem
Date: Wed, 17 Jul 2013 16:59:30 +0200 [thread overview]
Message-ID: <1374073170-19972-1-git-send-email-b.brezillon@overkiz.com> (raw)
In-Reply-To: <1374068069-13496-1-git-send-email-b.brezillon@overkiz.com>
This patch removes all references to the old at91 clks for sama5d3 SoCs.
These SoCs only supports dt boards: we can remove register_clocks
(all clocks are defined in dt).
Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com>
---
arch/arm/mach-at91/Kconfig | 1 +
arch/arm/mach-at91/sama5d3.c | 342 ------------------------------------------
2 files changed, 1 insertion(+), 342 deletions(-)
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 9901316..5a51254 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -41,6 +41,7 @@ config SOC_AT91SAM9
config SOC_SAMA5
bool
+ select COMMON_CLK
select AT91_SAM9_TIME
select CPU_V7
select GENERIC_CLOCKEVENTS
diff --git a/arch/arm/mach-at91/sama5d3.c b/arch/arm/mach-at91/sama5d3.c
index 32e0522..5e53be8 100644
--- a/arch/arm/mach-at91/sama5d3.c
+++ b/arch/arm/mach-at91/sama5d3.c
@@ -19,350 +19,9 @@
#include "soc.h"
#include "generic.h"
-#include "clock.h"
#include "sam9_smc.h"
/* --------------------------------------------------------------------
- * Clocks
- * -------------------------------------------------------------------- */
-
-/*
- * The peripheral clocks.
- */
-
-static struct clk pioA_clk = {
- .name = "pioA_clk",
- .pid = SAMA5D3_ID_PIOA,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk pioB_clk = {
- .name = "pioB_clk",
- .pid = SAMA5D3_ID_PIOB,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk pioC_clk = {
- .name = "pioC_clk",
- .pid = SAMA5D3_ID_PIOC,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk pioD_clk = {
- .name = "pioD_clk",
- .pid = SAMA5D3_ID_PIOD,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk pioE_clk = {
- .name = "pioE_clk",
- .pid = SAMA5D3_ID_PIOE,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk usart0_clk = {
- .name = "usart0_clk",
- .pid = SAMA5D3_ID_USART0,
- .type = CLK_TYPE_PERIPHERAL,
- .div = AT91_PMC_PCR_DIV2,
-};
-static struct clk usart1_clk = {
- .name = "usart1_clk",
- .pid = SAMA5D3_ID_USART1,
- .type = CLK_TYPE_PERIPHERAL,
- .div = AT91_PMC_PCR_DIV2,
-};
-static struct clk usart2_clk = {
- .name = "usart2_clk",
- .pid = SAMA5D3_ID_USART2,
- .type = CLK_TYPE_PERIPHERAL,
- .div = AT91_PMC_PCR_DIV2,
-};
-static struct clk usart3_clk = {
- .name = "usart3_clk",
- .pid = SAMA5D3_ID_USART3,
- .type = CLK_TYPE_PERIPHERAL,
- .div = AT91_PMC_PCR_DIV2,
-};
-static struct clk uart0_clk = {
- .name = "uart0_clk",
- .pid = SAMA5D3_ID_UART0,
- .type = CLK_TYPE_PERIPHERAL,
- .div = AT91_PMC_PCR_DIV2,
-};
-static struct clk uart1_clk = {
- .name = "uart1_clk",
- .pid = SAMA5D3_ID_UART1,
- .type = CLK_TYPE_PERIPHERAL,
- .div = AT91_PMC_PCR_DIV2,
-};
-static struct clk twi0_clk = {
- .name = "twi0_clk",
- .pid = SAMA5D3_ID_TWI0,
- .type = CLK_TYPE_PERIPHERAL,
- .div = AT91_PMC_PCR_DIV2,
-};
-static struct clk twi1_clk = {
- .name = "twi1_clk",
- .pid = SAMA5D3_ID_TWI1,
- .type = CLK_TYPE_PERIPHERAL,
- .div = AT91_PMC_PCR_DIV2,
-};
-static struct clk twi2_clk = {
- .name = "twi2_clk",
- .pid = SAMA5D3_ID_TWI2,
- .type = CLK_TYPE_PERIPHERAL,
- .div = AT91_PMC_PCR_DIV2,
-};
-static struct clk mmc0_clk = {
- .name = "mci0_clk",
- .pid = SAMA5D3_ID_HSMCI0,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk mmc1_clk = {
- .name = "mci1_clk",
- .pid = SAMA5D3_ID_HSMCI1,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk mmc2_clk = {
- .name = "mci2_clk",
- .pid = SAMA5D3_ID_HSMCI2,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk spi0_clk = {
- .name = "spi0_clk",
- .pid = SAMA5D3_ID_SPI0,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk spi1_clk = {
- .name = "spi1_clk",
- .pid = SAMA5D3_ID_SPI1,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk tcb0_clk = {
- .name = "tcb0_clk",
- .pid = SAMA5D3_ID_TC0,
- .type = CLK_TYPE_PERIPHERAL,
- .div = AT91_PMC_PCR_DIV2,
-};
-static struct clk tcb1_clk = {
- .name = "tcb1_clk",
- .pid = SAMA5D3_ID_TC1,
- .type = CLK_TYPE_PERIPHERAL,
- .div = AT91_PMC_PCR_DIV2,
-};
-static struct clk adc_clk = {
- .name = "adc_clk",
- .pid = SAMA5D3_ID_ADC,
- .type = CLK_TYPE_PERIPHERAL,
- .div = AT91_PMC_PCR_DIV2,
-};
-static struct clk adc_op_clk = {
- .name = "adc_op_clk",
- .type = CLK_TYPE_PERIPHERAL,
- .rate_hz = 5000000,
-};
-static struct clk dma0_clk = {
- .name = "dma0_clk",
- .pid = SAMA5D3_ID_DMA0,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk dma1_clk = {
- .name = "dma1_clk",
- .pid = SAMA5D3_ID_DMA1,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk uhphs_clk = {
- .name = "uhphs",
- .pid = SAMA5D3_ID_UHPHS,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk udphs_clk = {
- .name = "udphs_clk",
- .pid = SAMA5D3_ID_UDPHS,
- .type = CLK_TYPE_PERIPHERAL,
-};
-/* gmac only for sama5d33, sama5d34, sama5d35 */
-static struct clk macb0_clk = {
- .name = "macb0_clk",
- .pid = SAMA5D3_ID_GMAC,
- .type = CLK_TYPE_PERIPHERAL,
-};
-/* emac only for sama5d31, sama5d35 */
-static struct clk macb1_clk = {
- .name = "macb1_clk",
- .pid = SAMA5D3_ID_EMAC,
- .type = CLK_TYPE_PERIPHERAL,
-};
-/* lcd only for sama5d31, sama5d33, sama5d34 */
-static struct clk lcdc_clk = {
- .name = "lcdc_clk",
- .pid = SAMA5D3_ID_LCDC,
- .type = CLK_TYPE_PERIPHERAL,
-};
-/* isi only for sama5d33, sama5d35 */
-static struct clk isi_clk = {
- .name = "isi_clk",
- .pid = SAMA5D3_ID_ISI,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk can0_clk = {
- .name = "can0_clk",
- .pid = SAMA5D3_ID_CAN0,
- .type = CLK_TYPE_PERIPHERAL,
- .div = AT91_PMC_PCR_DIV2,
-};
-static struct clk can1_clk = {
- .name = "can1_clk",
- .pid = SAMA5D3_ID_CAN1,
- .type = CLK_TYPE_PERIPHERAL,
- .div = AT91_PMC_PCR_DIV2,
-};
-static struct clk ssc0_clk = {
- .name = "ssc0_clk",
- .pid = SAMA5D3_ID_SSC0,
- .type = CLK_TYPE_PERIPHERAL,
- .div = AT91_PMC_PCR_DIV2,
-};
-static struct clk ssc1_clk = {
- .name = "ssc1_clk",
- .pid = SAMA5D3_ID_SSC1,
- .type = CLK_TYPE_PERIPHERAL,
- .div = AT91_PMC_PCR_DIV2,
-};
-static struct clk sha_clk = {
- .name = "sha_clk",
- .pid = SAMA5D3_ID_SHA,
- .type = CLK_TYPE_PERIPHERAL,
- .div = AT91_PMC_PCR_DIV8,
-};
-static struct clk aes_clk = {
- .name = "aes_clk",
- .pid = SAMA5D3_ID_AES,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk tdes_clk = {
- .name = "tdes_clk",
- .pid = SAMA5D3_ID_TDES,
- .type = CLK_TYPE_PERIPHERAL,
-};
-
-static struct clk *periph_clocks[] __initdata = {
- &pioA_clk,
- &pioB_clk,
- &pioC_clk,
- &pioD_clk,
- &pioE_clk,
- &usart0_clk,
- &usart1_clk,
- &usart2_clk,
- &usart3_clk,
- &uart0_clk,
- &uart1_clk,
- &twi0_clk,
- &twi1_clk,
- &twi2_clk,
- &mmc0_clk,
- &mmc1_clk,
- &mmc2_clk,
- &spi0_clk,
- &spi1_clk,
- &tcb0_clk,
- &tcb1_clk,
- &adc_clk,
- &adc_op_clk,
- &dma0_clk,
- &dma1_clk,
- &uhphs_clk,
- &udphs_clk,
- &macb0_clk,
- &macb1_clk,
- &lcdc_clk,
- &isi_clk,
- &can0_clk,
- &can1_clk,
- &ssc0_clk,
- &ssc1_clk,
- &sha_clk,
- &aes_clk,
- &tdes_clk,
-};
-
-static struct clk pck0 = {
- .name = "pck0",
- .pmc_mask = AT91_PMC_PCK0,
- .type = CLK_TYPE_PROGRAMMABLE,
- .id = 0,
-};
-
-static struct clk pck1 = {
- .name = "pck1",
- .pmc_mask = AT91_PMC_PCK1,
- .type = CLK_TYPE_PROGRAMMABLE,
- .id = 1,
-};
-
-static struct clk pck2 = {
- .name = "pck2",
- .pmc_mask = AT91_PMC_PCK2,
- .type = CLK_TYPE_PROGRAMMABLE,
- .id = 2,
-};
-
-static struct clk_lookup periph_clocks_lookups[] = {
- /* lookup table for DT entries */
- CLKDEV_CON_DEV_ID("usart", "ffffee00.serial", &mck),
- CLKDEV_CON_DEV_ID(NULL, "fffff200.gpio", &pioA_clk),
- CLKDEV_CON_DEV_ID(NULL, "fffff400.gpio", &pioB_clk),
- CLKDEV_CON_DEV_ID(NULL, "fffff600.gpio", &pioC_clk),
- CLKDEV_CON_DEV_ID(NULL, "fffff800.gpio", &pioD_clk),
- CLKDEV_CON_DEV_ID(NULL, "fffffa00.gpio", &pioE_clk),
- CLKDEV_CON_DEV_ID("usart", "f001c000.serial", &usart0_clk),
- CLKDEV_CON_DEV_ID("usart", "f0020000.serial", &usart1_clk),
- CLKDEV_CON_DEV_ID("usart", "f8020000.serial", &usart2_clk),
- CLKDEV_CON_DEV_ID("usart", "f8024000.serial", &usart3_clk),
- CLKDEV_CON_DEV_ID(NULL, "f0014000.i2c", &twi0_clk),
- CLKDEV_CON_DEV_ID(NULL, "f0018000.i2c", &twi1_clk),
- CLKDEV_CON_DEV_ID(NULL, "f801c000.i2c", &twi2_clk),
- CLKDEV_CON_DEV_ID("mci_clk", "f0000000.mmc", &mmc0_clk),
- CLKDEV_CON_DEV_ID("mci_clk", "f8000000.mmc", &mmc1_clk),
- CLKDEV_CON_DEV_ID("mci_clk", "f8004000.mmc", &mmc2_clk),
- CLKDEV_CON_DEV_ID("spi_clk", "f0004000.spi", &spi0_clk),
- CLKDEV_CON_DEV_ID("spi_clk", "f8008000.spi", &spi1_clk),
- CLKDEV_CON_DEV_ID("t0_clk", "f0010000.timer", &tcb0_clk),
- CLKDEV_CON_DEV_ID("t0_clk", "f8014000.timer", &tcb1_clk),
- CLKDEV_CON_DEV_ID("tsc_clk", "f8018000.tsadcc", &adc_clk),
- CLKDEV_CON_DEV_ID("dma_clk", "ffffe600.dma-controller", &dma0_clk),
- CLKDEV_CON_DEV_ID("dma_clk", "ffffe800.dma-controller", &dma1_clk),
- CLKDEV_CON_DEV_ID("hclk", "600000.ohci", &uhphs_clk),
- CLKDEV_CON_DEV_ID("ohci_clk", "600000.ohci", &uhphs_clk),
- CLKDEV_CON_DEV_ID("ehci_clk", "700000.ehci", &uhphs_clk),
- CLKDEV_CON_DEV_ID("pclk", "500000.gadget", &udphs_clk),
- CLKDEV_CON_DEV_ID("hclk", "500000.gadget", &utmi_clk),
- CLKDEV_CON_DEV_ID("hclk", "f0028000.ethernet", &macb0_clk),
- CLKDEV_CON_DEV_ID("pclk", "f0028000.ethernet", &macb0_clk),
- CLKDEV_CON_DEV_ID("hclk", "f802c000.ethernet", &macb1_clk),
- CLKDEV_CON_DEV_ID("pclk", "f802c000.ethernet", &macb1_clk),
- CLKDEV_CON_DEV_ID("pclk", "f0008000.ssc", &ssc0_clk),
- CLKDEV_CON_DEV_ID("pclk", "f000c000.ssc", &ssc1_clk),
- CLKDEV_CON_DEV_ID("can_clk", "f000c000.can", &can0_clk),
- CLKDEV_CON_DEV_ID("can_clk", "f8010000.can", &can1_clk),
- CLKDEV_CON_DEV_ID("sha_clk", "f8034000.sha", &sha_clk),
- CLKDEV_CON_DEV_ID("aes_clk", "f8038000.aes", &aes_clk),
- CLKDEV_CON_DEV_ID("tdes_clk", "f803c000.tdes", &tdes_clk),
-};
-
-static void __init sama5d3_register_clocks(void)
-{
- int i;
-
- for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
- clk_register(periph_clocks[i]);
-
- clkdev_add_table(periph_clocks_lookups,
- ARRAY_SIZE(periph_clocks_lookups));
-
- clk_register(&pck0);
- clk_register(&pck1);
- clk_register(&pck2);
-}
-
-/* --------------------------------------------------------------------
* AT91SAM9x5 processor initialization
* -------------------------------------------------------------------- */
@@ -373,5 +32,4 @@ static void __init sama5d3_map_io(void)
AT91_SOC_START(sama5d3)
.map_io = sama5d3_map_io,
- .register_clocks = sama5d3_register_clocks,
AT91_SOC_END
--
1.7.9.5
next prev parent reply other threads:[~2013-07-17 14:59 UTC|newest]
Thread overview: 64+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-07-17 13:34 [PATCH v2 00/42] ARM: at91: move to common clk framework Boris BREZILLON
2013-07-17 13:37 ` [PATCH v2 01/42] ARM: at91: move at91_pmc.h to include/linux/clk/at91.h Boris BREZILLON
2013-07-23 18:03 ` Jean-Christophe PLAGNIOL-VILLARD
2013-07-23 22:24 ` boris brezillon
2013-07-17 13:40 ` [PATCH v2 02/42] ARM: at91: add PMC main clock Boris BREZILLON
2013-07-17 16:39 ` boris brezillon
2013-07-26 16:41 ` boris brezillon
2013-07-17 13:42 ` [PATCH v2 03/42] ARM: at91: add PMC pll clocks Boris BREZILLON
2013-07-17 13:44 ` [PATCH v2 04/42] ARM: at91: add PMC master clock Boris BREZILLON
2013-07-17 13:45 ` [PATCH v2 05/42] ARM: at91: add PMC system clocks Boris BREZILLON
2013-07-17 13:46 ` [PATCH v2 06/42] ARM: at91: add PMC peripheral clocks Boris BREZILLON
2013-07-17 13:47 ` [PATCH v2 07/42] ARM: at91: add PMC programmable clocks Boris BREZILLON
2013-07-17 13:50 ` [PATCH v2 08/42] ARM: at91: add PMC utmi clock Boris BREZILLON
2013-07-17 13:52 ` [PATCH v2 09/42] ARM: at91: add PMC usb clock Boris BREZILLON
2013-07-17 13:53 ` [PATCH v2 10/42] ARM: at91: add PMC smd clock Boris BREZILLON
2013-07-17 13:55 ` [PATCH v2 11/42] ARM: at91: add PMC clk device tree binding doc Boris BREZILLON
2013-07-17 14:35 ` [PATCH v2 12/42] ARM: at91: move to common clk framework Boris BREZILLON
2013-07-17 14:41 ` [PATCH v2 13/42] ARM: at91: move at91rm9200 SoC to new at91 clk implem Boris BREZILLON
2013-07-17 14:42 ` [PATCH v2 14/42] ARM: at91: move at91sam9260 " Boris BREZILLON
2013-07-17 14:44 ` [PATCH v2 15/42] ARM: at91: move at91sam9261 " Boris BREZILLON
2013-07-17 14:45 ` [PATCH v2 16/42] ARM: at91: move at91sam9263 " Boris BREZILLON
2013-07-17 14:49 ` [PATCH v2 17/42] ARM: at91: move at91sam9g45 " Boris BREZILLON
2013-07-23 22:29 ` boris brezillon
2013-07-17 14:49 ` [PATCH v2 18/42] ARM: at91: move at91sam9n12 " Boris BREZILLON
2013-07-17 14:52 ` [PATCH v2 19/42] ARM: at91: move at91sam9rl " Boris BREZILLON
2013-07-17 14:53 ` [PATCH v2 20/42] ARM: at91: move at91sam9x5 SoCs " Boris BREZILLON
2013-07-17 14:59 ` [PATCH v2 21/42] ARM: at91: move at91sam9 " Boris BREZILLON
2013-07-17 14:59 ` Boris BREZILLON [this message]
2013-07-17 15:00 ` [PATCH v2 23/42] ARM: at91: move at91rm9200 boards " Boris BREZILLON
2013-07-17 15:37 ` [PATCH v2 24/42] ARM: at91: move at91sam9 " Boris BREZILLON
2013-07-17 17:13 ` Russell King - ARM Linux
2013-07-17 20:32 ` boris brezillon
2013-07-17 15:46 ` [PATCH v2 25/42] ARM: at91: move pit timer to common clk framework Boris BREZILLON
2013-07-17 15:47 ` [PATCH v2 26/42] USB: ohci-at91: add usb_clk for transition " Boris BREZILLON
2013-07-31 7:56 ` boris brezillon
2013-07-31 14:32 ` Alan Stern
2013-07-17 15:49 ` [PATCH v2 27/42] usb: gadget: at91_udc: " Boris BREZILLON
2013-07-17 15:51 ` [PATCH v2 28/42] ARM: at91/dt: move at91rm9200 SoC to new at91 clk implem Boris BREZILLON
2013-07-17 15:53 ` [PATCH v2 29/42] ARM: at91/dt: move at91sam9260 " Boris BREZILLON
2013-07-17 15:55 ` [PATCH v2 30/42] ARM: at91/dt: move at91sam9263 " Boris BREZILLON
2013-07-17 16:00 ` [PATCH v2 31/42] ARM: at91/dt: move at91sam9g45 " Boris BREZILLON
2013-07-17 16:02 ` [PATCH v2 32/42] ARM: at91/dt: move at91sam9n12 " Boris BREZILLON
2013-07-17 16:05 ` [PATCH v2 33/42] ARM: at91/dt: move at91sam9x5 SoCs " Boris BREZILLON
2013-07-17 16:45 ` [PATCH v2 34/42] ARM: at91/dt: move at91sam9g20 SoC " Boris BREZILLON
2013-07-17 16:50 ` [PATCH v2 35/42] ARM: at91/dt: move sama5d3 SoCs " Boris BREZILLON
2013-07-17 20:06 ` [PATCH v2 36/42] ARM: at91/dt: move sam9260/sam9g20 " Boris BREZILLON
2013-07-17 20:08 ` [PATCH v2 37/42] ARM: at91/dt: move rm9200 boards " Boris BREZILLON
2013-07-17 20:09 ` [PATCH v2 38/42] ARM: at91/dt: move sam9263 " Boris BREZILLON
2013-07-17 20:17 ` [PATCH v2 39/42] ARM: at91/dt: move sam9g45 " Boris BREZILLON
2013-07-17 20:19 ` [PATCH v2 40/42] ARM: at91/dt: move sam9n12 " Boris BREZILLON
2013-07-17 20:21 ` [PATCH v2 41/42] ARM: at91/dt: move sam9x5 " Boris BREZILLON
2013-07-17 20:32 ` [PATCH v2 42/42] ARM: at91/dt: move sama5d3 " Boris BREZILLON
2013-07-18 8:51 ` [PATCH v2 00/42] ARM: at91: move to common clk framework boris brezillon
2013-07-26 14:10 ` Richard Genoud
2013-07-26 15:44 ` boris brezillon
2013-07-26 16:35 ` boris brezillon
2013-07-29 8:00 ` Richard Genoud
2013-07-29 9:25 ` boris brezillon
2013-07-29 14:18 ` Richard Genoud
2013-07-29 14:34 ` boris brezillon
2013-07-29 15:09 ` Richard Genoud
2013-07-29 15:14 ` boris brezillon
2013-07-29 16:44 ` boris brezillon
2013-07-27 4:41 ` boris brezillon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1374073170-19972-1-git-send-email-b.brezillon@overkiz.com \
--to=b.brezillon@overkiz.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@arm.linux.org.uk \
--cc=linux@maxim.org.za \
--cc=ludovic.desroches@atmel.com \
--cc=mturquette@linaro.org \
--cc=nicolas.ferre@atmel.com \
--cc=plagnioj@jcrosoft.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®