From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S933806Ab3GQQsr (ORCPT ); Wed, 17 Jul 2013 12:48:47 -0400 Received: from devils.ext.ti.com ([198.47.26.153]:40599 "EHLO devils.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S933051Ab3GQQqO (ORCPT ); Wed, 17 Jul 2013 12:46:14 -0400 From: Nishanth Menon To: =?UTF-8?q?Beno=C3=AEt=20Cousson?= , Tony Lindgren CC: , , , , J Keerthy , Nishanth Menon Subject: [PATCH 6/9] ARM: dts: omap5-uevm: update LDO4 voltage to 1.5V and settings Date: Wed, 17 Jul 2013 11:45:35 -0500 Message-ID: <1374079538-19548-7-git-send-email-nm@ti.com> X-Mailer: git-send-email 1.7.9.5 In-Reply-To: <1374079538-19548-1-git-send-email-nm@ti.com> References: <1374079538-19548-1-git-send-email-nm@ti.com> MIME-Version: 1.0 Content-Type: text/plain; charset="UTF-8" Content-Transfer-Encoding: 8bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org commit e00c27ef3b4c23e39d0a77b7c8e5be44c28001c7 (ARM: dts: OMAP5: Add Palmas MFD node and regulator nodes) introduced regulator entries for OMAP5uEVM. However, The regulator information is based on an older temporary pre-production board variant and does not reflect production board 750-2628-XXX boards. LDO4 supplies VDDAPHY_DISP which is vdda_dsiporta/c/vdda_hdmi This can only be supplied at 1.5V or 1.8V and we currently supply 2.2V. To prevent any potential device damage risk, use the specified 1.5V-1.8V supply. Remove 'always-on' and 'boot-on' settings here as it is a 'on need' supply to SoC IP and is not enabled by PMIC by default at boot. Reported-by: Marc Jüttner Signed-off-by: Nishanth Menon --- arch/arm/boot/dts/omap5-uevm.dts | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/arch/arm/boot/dts/omap5-uevm.dts b/arch/arm/boot/dts/omap5-uevm.dts index c6d560b..1550d6a 100644 --- a/arch/arm/boot/dts/omap5-uevm.dts +++ b/arch/arm/boot/dts/omap5-uevm.dts @@ -372,10 +372,8 @@ ldo4_reg: ldo4 { /* VDDAPHY_DISP: vdda_dsiport/hdmi */ regulator-name = "ldo4"; - regulator-min-microvolt = <2200000>; - regulator-max-microvolt = <2200000>; - regulator-always-on; - regulator-boot-on; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1800000>; }; ldo5_reg: ldo5 { -- 1.7.9.5