From: Hector Palacios <hector.palacios@digi.com>
To: <linux-iio@vger.kernel.org>
Cc: <linux-kernel@vger.kernel.org>,
<devicetree-discuss@lists.ozlabs.org>,
<alexandre.belloni@free-electrons.com>, <jic23@kernel.org>,
<lars@metafoo.de>, <fabio.estevam@freescale.com>, <marex@denx.de>,
<hector.palacios@digi.com>
Subject: [PATCH v3 0/5] iio: mxs-lradc: add support to optional divider_by_two
Date: Mon, 22 Jul 2013 16:03:58 +0200 [thread overview]
Message-ID: <1374501843-19651-1-git-send-email-hector.palacios@digi.com> (raw)
Greetings,
This is v3 of the patchset that adds support to the optional
divider_by_two of LRADC channels.
Changes in v3:
- Fix merge conflict with previous existing patch.
- Fix ampersand in function callback assignment.
- Removed unused parameters of function to read single sample.
- Ennumeration for two-dimensional array of scale (with divider
by two disabled or enabled), for improved readability.
- Created struct with integer and nano parts of the scale
attribute, for improved readability.
Changes in v2:
- Fix the sample mask passed by the touchscreen driver to the input
subsytem, to be 12 bits.
- Move the reference voltages to the Device Tree.
- Rebased to avoid conflict with Marek Vasut's prior patch.
- Use IIO_DEVICE_ATTR() macro for adding scale_available property to
all channels.
- Make 'is_divided' unsigned int.
Notes:
- Other fixes were discussed in v1 but they were not part of this
patchset changes, and should be handled in a separate patch.
- The 64bit math to calculate the integer and decimal parts of the
scaling attribute is a bit unreadable but used in other similar
drivers like ad7791, ad7793, and ad7192. If it is to be changed
it should be done in parallel with these, in a different patch.
The first patch changes the realbits to 12. The
second adds the channels reference voltages to the DT.
The following add the scale read operation, scale_available read
operation, and scale write operation.
This was tested on a custom i.MX28 platform.
Could someone please test on an i.MX23?
Hector Palacios (5):
iio: mxs-lradc: change the realbits to 12
ARM: dts: add reference voltage property for MXS LRADC
iio: mxs-lradc: add scale attribute to channels
iio: mxs-lradc: add scale_available file to channels
iio: mxs-lradc: add write_raw function to modify scale
.../bindings/staging/iio/adc/mxs-lradc.txt | 9 +-
arch/arm/boot/dts/imx23.dtsi | 4 +
arch/arm/boot/dts/imx28.dtsi | 4 +
drivers/staging/iio/adc/mxs-lradc.c | 255 ++++++++++++++++++---
4 files changed, 242 insertions(+), 30 deletions(-)
next reply other threads:[~2013-07-22 14:05 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-07-22 14:03 Hector Palacios [this message]
2013-07-22 14:03 ` [PATCH v3 1/5] iio: mxs-lradc: change the realbits to 12 Hector Palacios
2013-08-13 21:24 ` Jonathan Cameron
2013-07-22 14:04 ` [PATCH v3 2/5] ARM: dts: add reference voltage property for MXS LRADC Hector Palacios
2013-07-22 18:34 ` Lars-Peter Clausen
2013-07-22 22:06 ` Marek Vasut
2013-07-26 9:23 ` Alexandre Belloni
2013-08-13 21:23 ` Jonathan Cameron
2013-08-14 14:44 ` Pawel Moll
2013-08-21 22:13 ` Alexandre Belloni
2013-08-22 6:17 ` Jonathan Cameron
2013-08-22 16:51 ` Pawel Moll
2013-08-23 23:00 ` Jonathan Cameron
2013-09-23 12:47 ` Alexandre Belloni
2013-09-23 13:39 ` Hector Palacios
2013-08-22 8:05 ` Hector Palacios
2013-08-22 16:50 ` Pawel Moll
2013-08-22 16:41 ` Pawel Moll
2013-08-22 17:00 ` Lars-Peter Clausen
2013-07-22 14:04 ` [PATCH v3 3/5] iio: mxs-lradc: add scale attribute to channels Hector Palacios
2013-07-22 14:04 ` [PATCH v3 4/5] iio: mxs-lradc: add scale_available file " Hector Palacios
2013-07-22 22:36 ` Marek Vasut
2013-07-23 7:00 ` Hector Palacios
2013-07-23 8:46 ` Lars-Peter Clausen
2013-07-23 13:25 ` Hector Palacios
2013-07-26 13:17 ` Alexandre Belloni
2013-07-26 16:13 ` Jonathan Cameron
2013-08-07 7:50 ` Alexandre Belloni
2013-08-13 21:26 ` Jonathan Cameron
2013-07-22 14:04 ` [PATCH v3 5/5] iio: mxs-lradc: add write_raw function to modify scale Hector Palacios
2013-07-22 22:37 ` Marek Vasut
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1374501843-19651-1-git-send-email-hector.palacios@digi.com \
--to=hector.palacios@digi.com \
--cc=alexandre.belloni@free-electrons.com \
--cc=devicetree-discuss@lists.ozlabs.org \
--cc=fabio.estevam@freescale.com \
--cc=jic23@kernel.org \
--cc=lars@metafoo.de \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=marex@denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®