From: Grygorii Strashko <grygorii.strashko@ti.com>
To: Samuel Ortiz <sameo@linux.intel.com>, Lee Jones <lee.jones@linaro.org>
Cc: Kevin Hilman <khilman@linaro.org>,
Graeme Gregory <gg@slimlogic.co.uk>, <linux-omap@vger.kernel.org>,
Ruslan Bilovol <ruslan.bilovol@ti.com>,
<linux-kernel@vger.kernel.org>,
Oleksandr Dmytryshyn <oleksandr.dmytryshyn@ti.com>,
Grygorii Strashko <grygorii.strashko@ti.com>
Subject: [PATCH 4/4] mfd: twl6030-irq: Add interrupt mapping table for the twl6032
Date: Tue, 23 Jul 2013 19:07:04 +0300 [thread overview]
Message-ID: <1374595624-15054-5-git-send-email-grygorii.strashko@ti.com> (raw)
In-Reply-To: <1374595624-15054-1-git-send-email-grygorii.strashko@ti.com>
From: Oleksandr Dmytryshyn <oleksandr.dmytryshyn@ti.com>
This patch adds interrupt mapping table for the twl6032.
Signed-off-by: Oleksandr Dmytryshyn <oleksandr.dmytryshyn@ti.com>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
---
drivers/mfd/twl6030-irq.c | 49 ++++++++++++++++++++++++++++++++++++++++++++-
1 file changed, 48 insertions(+), 1 deletion(-)
diff --git a/drivers/mfd/twl6030-irq.c b/drivers/mfd/twl6030-irq.c
index 89f130b..e4df87f 100644
--- a/drivers/mfd/twl6030-irq.c
+++ b/drivers/mfd/twl6030-irq.c
@@ -41,6 +41,7 @@
#include <linux/suspend.h>
#include <linux/of.h>
#include <linux/irqdomain.h>
+#include <linux/of_device.h>
#include "twl-core.h"
@@ -84,6 +85,36 @@ static int twl6030_interrupt_mapping[24] = {
CHARGERFAULT_INTR_OFFSET, /* Bit 22 INT_CHRG */
RSV_INTR_OFFSET, /* Bit 23 Reserved */
};
+
+static int twl6032_interrupt_mapping[24] = {
+ PWR_INTR_OFFSET, /* Bit 0 PWRON */
+ PWR_INTR_OFFSET, /* Bit 1 RPWRON */
+ PWR_INTR_OFFSET, /* Bit 2 SYS_VLOW */
+ RTC_INTR_OFFSET, /* Bit 3 RTC_ALARM */
+ RTC_INTR_OFFSET, /* Bit 4 RTC_PERIOD */
+ HOTDIE_INTR_OFFSET, /* Bit 5 HOT_DIE */
+ SMPSLDO_INTR_OFFSET, /* Bit 6 VXXX_SHORT */
+ PWR_INTR_OFFSET, /* Bit 7 SPDURATION */
+
+ PWR_INTR_OFFSET, /* Bit 8 WATCHDOG */
+ BATDETECT_INTR_OFFSET, /* Bit 9 BAT */
+ SIMDETECT_INTR_OFFSET, /* Bit 10 SIM */
+ MMCDETECT_INTR_OFFSET, /* Bit 11 MMC */
+ MADC_INTR_OFFSET, /* Bit 12 GPADC_RT_EOC */
+ MADC_INTR_OFFSET, /* Bit 13 GPADC_SW_EOC */
+ GASGAUGE_INTR_OFFSET, /* Bit 14 CC_EOC */
+ GASGAUGE_INTR_OFFSET, /* Bit 15 CC_AUTOCAL */
+
+ USBOTG_INTR_OFFSET, /* Bit 16 ID_WKUP */
+ USBOTG_INTR_OFFSET, /* Bit 17 VBUS_WKUP */
+ USBOTG_INTR_OFFSET, /* Bit 18 ID */
+ USB_PRES_INTR_OFFSET, /* Bit 19 VBUS */
+ CHARGER_INTR_OFFSET, /* Bit 20 CHRG_CTRL */
+ CHARGERFAULT_INTR_OFFSET, /* Bit 21 EXT_CHRG */
+ CHARGERFAULT_INTR_OFFSET, /* Bit 22 INT_CHRG */
+ RSV_INTR_OFFSET, /* Bit 23 Reserved */
+};
+
/*----------------------------------------------------------------------*/
static unsigned twl6030_irq_base;
@@ -91,6 +122,7 @@ static int twl_irq;
static bool twl_irq_wake_enabled;
static atomic_t twl6030_wakeirqs = ATOMIC_INIT(0);
+static const int *irq_mapping_tbl;
static int twl6030_irq_pm_notifier(struct notifier_block *notifier,
unsigned long pm_event, void *unused)
@@ -164,7 +196,7 @@ static irqreturn_t twl6030_irq_thread(int irq, void *data)
if (sts.int_sts & 0x1) {
int module_irq =
irq_find_mapping(irq_domain,
- twl6030_interrupt_mapping[i]);
+ irq_mapping_tbl[i]);
if (module_irq)
handle_nested_irq(module_irq);
else
@@ -339,6 +371,12 @@ static struct irq_domain_ops twl6030_irq_domain_ops = {
.xlate = irq_domain_xlate_onetwocell,
};
+static const struct of_device_id twl6030_of_match[] = {
+ {.compatible = "ti,twl6030", &twl6030_interrupt_mapping},
+ {.compatible = "ti,twl6032", &twl6032_interrupt_mapping},
+ { },
+};
+
int twl6030_init_irq(struct device *dev, int irq_num)
{
struct device_node *node = dev->of_node;
@@ -346,6 +384,15 @@ int twl6030_init_irq(struct device *dev, int irq_num)
int status;
u8 mask[3];
struct irq_domain *irq_domain;
+ const struct of_device_id *of_id;
+
+ of_id = of_match_device(twl6030_of_match, dev);
+ if (!of_id || !of_id->data) {
+ dev_err(dev, "Unknown TWL device model\n");
+ return -EINVAL;
+ }
+
+ irq_mapping_tbl = of_id->data;
nr_irqs = TWL6030_NR_IRQS;
--
1.7.9.5
next prev parent reply other threads:[~2013-07-23 16:09 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-07-23 16:07 [PATCH 0/4] mfd: twl6030-irq: rework and add twl6032 support Grygorii Strashko
2013-07-23 16:07 ` [PATCH 1/4] mfd: twl6030-irq: migrate to IRQ threaded handler Grygorii Strashko
2013-07-24 10:49 ` Lee Jones
2013-07-24 11:54 ` Grygorii Strashko
2013-07-24 12:50 ` Lee Jones
2013-07-24 13:17 ` Grygorii Strashko
2013-07-24 11:54 ` Lee Jones
2013-07-23 16:07 ` [PATCH 2/4] mfd: twl6030-irq: add error check when IRQs are masked initially Grygorii Strashko
2013-07-23 18:08 ` Graeme Gregory
2013-07-24 11:51 ` Grygorii Strashko
2013-07-23 16:07 ` [PATCH 3/4] mfd: twl6030-irq: convert to use linear irq_domain Grygorii Strashko
2013-07-24 11:35 ` Lee Jones
2013-07-24 13:37 ` Grygorii Strashko
2013-07-23 16:07 ` Grygorii Strashko [this message]
2013-07-24 11:52 ` [PATCH 4/4] mfd: twl6030-irq: Add interrupt mapping table for the twl6032 Lee Jones
2013-07-24 13:39 ` Grygorii Strashko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1374595624-15054-5-git-send-email-grygorii.strashko@ti.com \
--to=grygorii.strashko@ti.com \
--cc=gg@slimlogic.co.uk \
--cc=khilman@linaro.org \
--cc=lee.jones@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=oleksandr.dmytryshyn@ti.com \
--cc=ruslan.bilovol@ti.com \
--cc=sameo@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®