From: Olof Johansson <olof@lixom.net>
To: Richard Purdie <rpurdie@rpsys.net>, Jingoo Han <jg1.han@samsung.com>
Cc: linux-kernel@vger.kernel.org, sameo@linux.intel.com,
Qing Xu <qingx@marvell.com>,
Haojian Zhuang <haojian.zhuang@gmail.com>,
linux-arm-kernel@lists.infradead.org, holt@sgi.com,
Olof Johansson <olof@lixom.net>
Subject: [PATCH] mfd: max8925: fix dt code for backlight
Date: Wed, 24 Jul 2013 08:42:27 -0700 [thread overview]
Message-ID: <1374680547-5336-1-git-send-email-olof@lixom.net> (raw)
The device-tree enablement for max8925 has several problems, but besides
the bindings being wrong (and not having seen review) there's also some
bad coding practices on how to fill in the platform_data from device tree.
I came across this since it causes a warning when compiling
mmp2_defconfig, and instead of doing the minimal fix to silence the
warning, I restructured the code a bit.
This silences the warning:
drivers/video/backlight/max8925_bl.c: In function 'max8925_backlight_probe':
drivers/video/backlight/max8925_bl.c:177:3: warning: statement with no effect [-Wunused-value]
Note that the bindings themselves need to be revisited too, but that will
affect more than just the backlight driver and is best done separately;
this just fixes the bad code for the backlight driver.
Signed-off-by: Olof Johansson <olof@lixom.net>
---
Richard, Jingoo, this would be good to see go into 3.11 if you're
comfortable with it.
-Olof
drivers/video/backlight/max8925_bl.c | 41 +++++++++++++++++-----------------
1 file changed, 21 insertions(+), 20 deletions(-)
diff --git a/drivers/video/backlight/max8925_bl.c b/drivers/video/backlight/max8925_bl.c
index 5ca11b0..886e797 100644
--- a/drivers/video/backlight/max8925_bl.c
+++ b/drivers/video/backlight/max8925_bl.c
@@ -101,33 +101,37 @@ static const struct backlight_ops max8925_backlight_ops = {
.get_brightness = max8925_backlight_get_brightness,
};
-#ifdef CONFIG_OF
-static int max8925_backlight_dt_init(struct platform_device *pdev,
- struct max8925_backlight_pdata *pdata)
+static void max8925_backlight_dt_init(struct platform_device *pdev)
{
struct device_node *nproot = pdev->dev.parent->of_node, *np;
- int dual_string;
+ struct max8925_backlight_pdata *pdata;
+ u32 val;
+
+ if (!nproot || !IS_ENABLED(CONFIG_OF))
+ return;
+
+ pdata = devm_kzalloc(&pdev->dev,
+ sizeof(struct max8925_backlight_pdata),
+ GFP_KERNEL);
+ if (!pdata)
+ return;
- if (!nproot)
- return -ENODEV;
np = of_find_node_by_name(nproot, "backlight");
if (!np) {
dev_err(&pdev->dev, "failed to find backlight node\n");
- return -ENODEV;
+ return;
}
- of_property_read_u32(np, "maxim,max8925-dual-string", &dual_string);
- pdata->dual_string = dual_string;
- return 0;
+ if (!of_property_read_u32(np, "maxim,max8925-dual-string", &val))
+ pdata->dual_string = val;
+
+ pdev->dev.platform_data = pdata;
}
-#else
-#define max8925_backlight_dt_init(x, y) (-1)
-#endif
static int max8925_backlight_probe(struct platform_device *pdev)
{
struct max8925_chip *chip = dev_get_drvdata(pdev->dev.parent);
- struct max8925_backlight_pdata *pdata = pdev->dev.platform_data;
+ struct max8925_backlight_pdata *pdata;
struct max8925_backlight_data *data;
struct backlight_device *bl;
struct backlight_properties props;
@@ -170,13 +174,10 @@ static int max8925_backlight_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, bl);
value = 0;
- if (pdev->dev.parent->of_node && !pdata) {
- pdata = devm_kzalloc(&pdev->dev,
- sizeof(struct max8925_backlight_pdata),
- GFP_KERNEL);
- max8925_backlight_dt_init(pdev, pdata);
- }
+ if (!pdev->dev.platform_data)
+ max8925_backlight_dt_init(pdev);
+ pdata = pdev->dev.platform_data;
if (pdata) {
if (pdata->lxw_scl)
value |= (1 << 7);
--
1.7.10.4
next reply other threads:[~2013-07-24 15:42 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-07-24 15:42 Olof Johansson [this message]
2013-07-25 1:13 ` Jingoo Han
2013-07-25 21:00 ` Olof Johansson
2013-07-25 23:17 ` Jingoo Han
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1374680547-5336-1-git-send-email-olof@lixom.net \
--to=olof@lixom.net \
--cc=haojian.zhuang@gmail.com \
--cc=holt@sgi.com \
--cc=jg1.han@samsung.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=qingx@marvell.com \
--cc=rpurdie@rpsys.net \
--cc=sameo@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®