From: Oleksandr Kravchenko <x0199363@ti.com>
To: <linux-iio@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<linux-doc@vger.kernel.org>
Cc: <grant.likely@linaro.org>, <rob.herring@calxeda.com>,
<rob@landley.net>, <jic23@cam.ac.uk>, <pmeerw@pmeerw.net>,
<holler@ahsoftware.de>, <srinivas.pandruvada@intel.com>,
<devicetree-discuss@lists.ozlabs.org>,
Oleksandr Kravchenko <o.v.kravchenko@globallogic.com>
Subject: [PATCH 1/2] ARM: OMAP4: Tablet: Add BMA180 sensor
Date: Mon, 29 Jul 2013 17:58:12 +0300 [thread overview]
Message-ID: <1375109893-7917-1-git-send-email-x0199363@ti.com> (raw)
From: Oleksandr Kravchenko <o.v.kravchenko@globallogic.com>
Add Bosch BMA180 acceleration sensor devicetree
Signed-off-by: Oleksandr Kravchenko <o.v.kravchenko@globallogic.com>
---
arch/arm/boot/dts/omap4-sdp.dts | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts
index c9022df..13d8279 100644
--- a/arch/arm/boot/dts/omap4-sdp.dts
+++ b/arch/arm/boot/dts/omap4-sdp.dts
@@ -170,6 +170,7 @@
&dss_hdmi_pins
&tpd12s015_pins
&apds9300_pins
+ &bma180_pins
>;
uart2_pins: pinmux_uart2_pins {
@@ -305,6 +306,12 @@
0x50 (PIN_INPUT | MUX_MODE3) /* gpmc_nbe1.gpio_61 */
>;
};
+
+ bma180_pins: pinmux_bma180_pins {
+ pinctrl-single,pins = <
+ 0x156 (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_nbe1.gpio_178 */
+ >;
+ };
};
&i2c1 {
@@ -405,6 +412,17 @@
interrupt-parent = <&gpio2>;
interrupts = <29 8>; /* gpio line 61, low triggered */
};
+
+ bma180@40 {
+ compatible = "bosch,bma180";
+ reg = <0x40>;
+ interrupt-parent = <&gpio6>;
+ interrupts = <18 (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_EDGE_RISING)>;
+ range = <2>;
+ bw = <5>;
+ mode_config = <1>;
+ fuzz = <555>;
+ };
};
&mcspi1 {
--
1.7.9.5
next reply other threads:[~2013-07-29 14:58 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-07-29 14:58 Oleksandr Kravchenko [this message]
2013-07-29 14:58 ` [PATCH 2/2] iio: add Bosch BMA180 acceleration sensor driver Oleksandr Kravchenko
2013-07-29 15:15 ` Peter Meerwald
2013-07-31 21:18 ` Jonathan Cameron
2013-08-02 14:59 ` Oleksandr Kravchenko
2013-08-04 13:45 ` Lars-Peter Clausen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1375109893-7917-1-git-send-email-x0199363@ti.com \
--to=x0199363@ti.com \
--cc=devicetree-discuss@lists.ozlabs.org \
--cc=grant.likely@linaro.org \
--cc=holler@ahsoftware.de \
--cc=jic23@cam.ac.uk \
--cc=linux-doc@vger.kernel.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=o.v.kravchenko@globallogic.com \
--cc=pmeerw@pmeerw.net \
--cc=rob.herring@calxeda.com \
--cc=rob@landley.net \
--cc=srinivas.pandruvada@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®