From: Maxime Ripard <maxime.ripard@free-electrons.com>
To: linux-arm-kernel@lists.infradead.org
Cc: Emilio Lopez <emilio@elopez.com.ar>,
kevin.z.m.zh@gmail.com, sunny@allwinnertech.com,
shuge@allwinnertech.com, linux-kernel@vger.kernel.org,
linux-sunxi@googlegroups.com,
Maxime Ripard <maxime.ripard@free-electrons.com>,
Linus Walleij <linus.walleij@linaro.org>
Subject: [PATCH 06/10] pinctrl: sunxi: Fix inconsistent indentation
Date: Tue, 30 Jul 2013 16:59:50 +0200 [thread overview]
Message-ID: <1375196394-21138-7-git-send-email-maxime.ripard@free-electrons.com> (raw)
In-Reply-To: <1375196394-21138-1-git-send-email-maxime.ripard@free-electrons.com>
Some pin functions in the array were not indented like the other
functions in this array. Fix this.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
---
drivers/pinctrl/pinctrl-sunxi-pins.h | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/drivers/pinctrl/pinctrl-sunxi-pins.h b/drivers/pinctrl/pinctrl-sunxi-pins.h
index 3368965..2c7446a 100644
--- a/drivers/pinctrl/pinctrl-sunxi-pins.h
+++ b/drivers/pinctrl/pinctrl-sunxi-pins.h
@@ -806,7 +806,7 @@ static const struct sunxi_desc_pin sun4i_a10_pins[] = {
SUNXI_FUNCTION(0x3, "pata"), /* ATAD13 */
SUNXI_FUNCTION(0x4, "keypad"), /* IN7 */
SUNXI_FUNCTION(0x5, "sim"), /* VCCEN */
- SUNXI_FUNCTION_IRQ(0x6, 17), /* EINT17 */
+ SUNXI_FUNCTION_IRQ(0x6, 17), /* EINT17 */
SUNXI_FUNCTION(0x7, "csi1")), /* D17 */
SUNXI_PIN(SUNXI_PINCTRL_PIN_PH18,
SUNXI_FUNCTION(0x0, "gpio_in"),
@@ -815,7 +815,7 @@ static const struct sunxi_desc_pin sun4i_a10_pins[] = {
SUNXI_FUNCTION(0x3, "pata"), /* ATAD14 */
SUNXI_FUNCTION(0x4, "keypad"), /* OUT0 */
SUNXI_FUNCTION(0x5, "sim"), /* SCK */
- SUNXI_FUNCTION_IRQ(0x6, 18), /* EINT18 */
+ SUNXI_FUNCTION_IRQ(0x6, 18), /* EINT18 */
SUNXI_FUNCTION(0x7, "csi1")), /* D18 */
SUNXI_PIN(SUNXI_PINCTRL_PIN_PH19,
SUNXI_FUNCTION(0x0, "gpio_in"),
@@ -824,7 +824,7 @@ static const struct sunxi_desc_pin sun4i_a10_pins[] = {
SUNXI_FUNCTION(0x3, "pata"), /* ATAD15 */
SUNXI_FUNCTION(0x4, "keypad"), /* OUT1 */
SUNXI_FUNCTION(0x5, "sim"), /* SDA */
- SUNXI_FUNCTION_IRQ(0x6, 19), /* EINT19 */
+ SUNXI_FUNCTION_IRQ(0x6, 19), /* EINT19 */
SUNXI_FUNCTION(0x7, "csi1")), /* D19 */
SUNXI_PIN(SUNXI_PINCTRL_PIN_PH20,
SUNXI_FUNCTION(0x0, "gpio_in"),
@@ -832,7 +832,7 @@ static const struct sunxi_desc_pin sun4i_a10_pins[] = {
SUNXI_FUNCTION(0x2, "lcd1"), /* D20 */
SUNXI_FUNCTION(0x3, "pata"), /* ATAOE */
SUNXI_FUNCTION(0x4, "can"), /* TX */
- SUNXI_FUNCTION_IRQ(0x6, 20), /* EINT20 */
+ SUNXI_FUNCTION_IRQ(0x6, 20), /* EINT20 */
SUNXI_FUNCTION(0x7, "csi1")), /* D20 */
SUNXI_PIN(SUNXI_PINCTRL_PIN_PH21,
SUNXI_FUNCTION(0x0, "gpio_in"),
@@ -840,7 +840,7 @@ static const struct sunxi_desc_pin sun4i_a10_pins[] = {
SUNXI_FUNCTION(0x2, "lcd1"), /* D21 */
SUNXI_FUNCTION(0x3, "pata"), /* ATADREQ */
SUNXI_FUNCTION(0x4, "can"), /* RX */
- SUNXI_FUNCTION_IRQ(0x6, 21), /* EINT21 */
+ SUNXI_FUNCTION_IRQ(0x6, 21), /* EINT21 */
SUNXI_FUNCTION(0x7, "csi1")), /* D21 */
SUNXI_PIN(SUNXI_PINCTRL_PIN_PH22,
SUNXI_FUNCTION(0x0, "gpio_in"),
--
1.8.3.4
next prev parent reply other threads:[~2013-07-30 15:00 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-07-30 14:59 [PATCH 00/10] Introduce Allwinner A20 support Maxime Ripard
2013-07-30 14:59 ` [PATCH 01/10] ARM: sunxi: " Maxime Ripard
2013-07-30 14:59 ` [PATCH 02/10] ARM: sun7i: Add Allwinner A20 DTSI Maxime Ripard
2013-07-30 14:59 ` [PATCH 03/10] ARM: sun7i: Add Olimex A20-Olinuxino-Micro support Maxime Ripard
2013-07-30 14:59 ` [PATCH 04/10] pinctrl: sunxi: Wrap long compatible declaration lines Maxime Ripard
2013-07-30 15:09 ` [linux-sunxi] " Ian Campbell
2013-07-30 20:31 ` Maxime Ripard
2013-07-30 14:59 ` [PATCH 05/10] pinctrl: sunxi: Add Allwinner A20 pins set Maxime Ripard
2013-07-30 14:59 ` Maxime Ripard [this message]
2013-07-30 14:59 ` [PATCH 07/10] ARM: sun7i: Add the PIO controller node to the DTSI Maxime Ripard
2013-07-30 14:59 ` [PATCH 08/10] ARM: sun7i: DT: Add UART muxing options " Maxime Ripard
2013-07-30 19:07 ` Sergei Shtylyov
2013-07-30 20:10 ` Maxime Ripard
2013-07-30 14:59 ` [PATCH 09/10] ARM: sun7i: a20-olinuxino: Enable UARTs muxing Maxime Ripard
2013-07-30 14:59 ` [PATCH 10/10] ARM: sun7i: a20-olinuxino: Enable the user LED Maxime Ripard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1375196394-21138-7-git-send-email-maxime.ripard@free-electrons.com \
--to=maxime.ripard@free-electrons.com \
--cc=emilio@elopez.com.ar \
--cc=kevin.z.m.zh@gmail.com \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sunxi@googlegroups.com \
--cc=shuge@allwinnertech.com \
--cc=sunny@allwinnertech.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®