[PATCH 15/23] hardirq: Split preempt count mask definitions

[Frederic Weisbecker <fweisbec@gmail.com>]

In order to use static keys with vtime APIs, we'll need to
add static keys headers to vtime.h

hardirq.h then becomes a problem because it needs vtime.h
for irqtime accounting in irq_enter/irq_exit, but it's
often included just to get the irq mask definitions in the
task preempt_count field and the APIs that come along:
in_interrupt(), in_hardirq(), etc...

Some very low level arch headers sometimes need these masks
and APIs such as arch/m68k/include/asm/irqflags.h for example.
But they don't want to include hardirq.h if vtime.h, jump_label.h
and even workqueue.h come along. Including such bloated high
level header from arch headers can quickly result in circular
headers dependency that crash the build.

So let's split hardirq.h in two parts:

* preempt_mask.h that gathers all the preempt_count definitions
and the APIs associated. This one is considered low level and can
be safely included anywhere.

* hardirq.h that includes the previous one. It defines the irq
entry/exit APIs.

To avoid future circular headers dependencies, the preempt_mask.h
inclusion can replace hardirq.h on files that don't implement irq
low level handlers but just need the atomic/context check APIs.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Li Zhong <zhong@linux.vnet.ibm.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Kevin Hilman <khilman@linaro.org>
---
 include/linux/hardirq.h      |  117 +---------------------------------------
 include/linux/preempt_mask.h |  122 ++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 123 insertions(+), 116 deletions(-)
 create mode 100644 include/linux/preempt_mask.h

diff --git a/include/linux/hardirq.h b/include/linux/hardirq.h
index 05bcc09..ccfe17c 100644
--- a/include/linux/hardirq.h
+++ b/include/linux/hardirq.h
@@ -1,126 +1,11 @@
 #ifndef LINUX_HARDIRQ_H
 #define LINUX_HARDIRQ_H
 
-#include <linux/preempt.h>
+#include <linux/preempt_mask.h>
 #include <linux/lockdep.h>
 #include <linux/ftrace_irq.h>
 #include <linux/vtime.h>
-#include <asm/hardirq.h>
 
-/*
- * We put the hardirq and softirq counter into the preemption
- * counter. The bitmask has the following meaning:
- *
- * - bits 0-7 are the preemption count (max preemption depth: 256)
- * - bits 8-15 are the softirq count (max # of softirqs: 256)
- *
- * The hardirq count can in theory reach the same as NR_IRQS.
- * In reality, the number of nested IRQS is limited to the stack
- * size as well. For archs with over 1000 IRQS it is not practical
- * to expect that they will all nest. We give a max of 10 bits for
- * hardirq nesting. An arch may choose to give less than 10 bits.
- * m68k expects it to be 8.
- *
- * - bits 16-25 are the hardirq count (max # of nested hardirqs: 1024)
- * - bit 26 is the NMI_MASK
- * - bit 27 is the PREEMPT_ACTIVE flag
- *
- * PREEMPT_MASK: 0x000000ff
- * SOFTIRQ_MASK: 0x0000ff00
- * HARDIRQ_MASK: 0x03ff0000
- *     NMI_MASK: 0x04000000
- */
-#define PREEMPT_BITS	8
-#define SOFTIRQ_BITS	8
-#define NMI_BITS	1
-
-#define MAX_HARDIRQ_BITS 10
-
-#ifndef HARDIRQ_BITS
-# define HARDIRQ_BITS	MAX_HARDIRQ_BITS
-#endif
-
-#if HARDIRQ_BITS > MAX_HARDIRQ_BITS
-#error HARDIRQ_BITS too high!
-#endif
-
-#define PREEMPT_SHIFT	0
-#define SOFTIRQ_SHIFT	(PREEMPT_SHIFT + PREEMPT_BITS)
-#define HARDIRQ_SHIFT	(SOFTIRQ_SHIFT + SOFTIRQ_BITS)
-#define NMI_SHIFT	(HARDIRQ_SHIFT + HARDIRQ_BITS)
-
-#define __IRQ_MASK(x)	((1UL << (x))-1)
-
-#define PREEMPT_MASK	(__IRQ_MASK(PREEMPT_BITS) << PREEMPT_SHIFT)
-#define SOFTIRQ_MASK	(__IRQ_MASK(SOFTIRQ_BITS) << SOFTIRQ_SHIFT)
-#define HARDIRQ_MASK	(__IRQ_MASK(HARDIRQ_BITS) << HARDIRQ_SHIFT)
-#define NMI_MASK	(__IRQ_MASK(NMI_BITS)     << NMI_SHIFT)
-
-#define PREEMPT_OFFSET	(1UL << PREEMPT_SHIFT)
-#define SOFTIRQ_OFFSET	(1UL << SOFTIRQ_SHIFT)
-#define HARDIRQ_OFFSET	(1UL << HARDIRQ_SHIFT)
-#define NMI_OFFSET	(1UL << NMI_SHIFT)
-
-#define SOFTIRQ_DISABLE_OFFSET	(2 * SOFTIRQ_OFFSET)
-
-#ifndef PREEMPT_ACTIVE
-#define PREEMPT_ACTIVE_BITS	1
-#define PREEMPT_ACTIVE_SHIFT	(NMI_SHIFT + NMI_BITS)
-#define PREEMPT_ACTIVE	(__IRQ_MASK(PREEMPT_ACTIVE_BITS) << PREEMPT_ACTIVE_SHIFT)
-#endif
-
-#if PREEMPT_ACTIVE < (1 << (NMI_SHIFT + NMI_BITS))
-#error PREEMPT_ACTIVE is too low!
-#endif
-
-#define hardirq_count()	(preempt_count() & HARDIRQ_MASK)
-#define softirq_count()	(preempt_count() & SOFTIRQ_MASK)
-#define irq_count()	(preempt_count() & (HARDIRQ_MASK | SOFTIRQ_MASK \
-				 | NMI_MASK))
-
-/*
- * Are we doing bottom half or hardware interrupt processing?
- * Are we in a softirq context? Interrupt context?
- * in_softirq - Are we currently processing softirq or have bh disabled?
- * in_serving_softirq - Are we currently processing softirq?
- */
-#define in_irq()		(hardirq_count())
-#define in_softirq()		(softirq_count())
-#define in_interrupt()		(irq_count())
-#define in_serving_softirq()	(softirq_count() & SOFTIRQ_OFFSET)
-
-/*
- * Are we in NMI context?
- */
-#define in_nmi()	(preempt_count() & NMI_MASK)
-
-#if defined(CONFIG_PREEMPT_COUNT)
-# define PREEMPT_CHECK_OFFSET 1
-#else
-# define PREEMPT_CHECK_OFFSET 0
-#endif
-
-/*
- * Are we running in atomic context?  WARNING: this macro cannot
- * always detect atomic context; in particular, it cannot know about
- * held spinlocks in non-preemptible kernels.  Thus it should not be
- * used in the general case to determine whether sleeping is possible.
- * Do not use in_atomic() in driver code.
- */
-#define in_atomic()	((preempt_count() & ~PREEMPT_ACTIVE) != 0)
-
-/*
- * Check whether we were atomic before we did preempt_disable():
- * (used by the scheduler, *after* releasing the kernel lock)
- */
-#define in_atomic_preempt_off() \
-		((preempt_count() & ~PREEMPT_ACTIVE) != PREEMPT_CHECK_OFFSET)
-
-#ifdef CONFIG_PREEMPT_COUNT
-# define preemptible()	(preempt_count() == 0 && !irqs_disabled())
-#else
-# define preemptible()	0
-#endif
 
 #if defined(CONFIG_SMP) || defined(CONFIG_GENERIC_HARDIRQS)
 extern void synchronize_irq(unsigned int irq);
diff --git a/include/linux/preempt_mask.h b/include/linux/preempt_mask.h
new file mode 100644
index 0000000..931bc61
--- /dev/null
+++ b/include/linux/preempt_mask.h
@@ -0,0 +1,122 @@
+#ifndef LINUX_PREEMPT_MASK_H
+#define LINUX_PREEMPT_MASK_H
+
+#include <linux/preempt.h>
+#include <asm/hardirq.h>
+
+/*
+ * We put the hardirq and softirq counter into the preemption
+ * counter. The bitmask has the following meaning:
+ *
+ * - bits 0-7 are the preemption count (max preemption depth: 256)
+ * - bits 8-15 are the softirq count (max # of softirqs: 256)
+ *
+ * The hardirq count can in theory reach the same as NR_IRQS.
+ * In reality, the number of nested IRQS is limited to the stack
+ * size as well. For archs with over 1000 IRQS it is not practical
+ * to expect that they will all nest. We give a max of 10 bits for
+ * hardirq nesting. An arch may choose to give less than 10 bits.
+ * m68k expects it to be 8.
+ *
+ * - bits 16-25 are the hardirq count (max # of nested hardirqs: 1024)
+ * - bit 26 is the NMI_MASK
+ * - bit 27 is the PREEMPT_ACTIVE flag
+ *
+ * PREEMPT_MASK: 0x000000ff
+ * SOFTIRQ_MASK: 0x0000ff00
+ * HARDIRQ_MASK: 0x03ff0000
+ *     NMI_MASK: 0x04000000
+ */
+#define PREEMPT_BITS	8
+#define SOFTIRQ_BITS	8
+#define NMI_BITS	1
+
+#define MAX_HARDIRQ_BITS 10
+
+#ifndef HARDIRQ_BITS
+# define HARDIRQ_BITS	MAX_HARDIRQ_BITS
+#endif
+
+#if HARDIRQ_BITS > MAX_HARDIRQ_BITS
+#error HARDIRQ_BITS too high!
+#endif
+
+#define PREEMPT_SHIFT	0
+#define SOFTIRQ_SHIFT	(PREEMPT_SHIFT + PREEMPT_BITS)
+#define HARDIRQ_SHIFT	(SOFTIRQ_SHIFT + SOFTIRQ_BITS)
+#define NMI_SHIFT	(HARDIRQ_SHIFT + HARDIRQ_BITS)
+
+#define __IRQ_MASK(x)	((1UL << (x))-1)
+
+#define PREEMPT_MASK	(__IRQ_MASK(PREEMPT_BITS) << PREEMPT_SHIFT)
+#define SOFTIRQ_MASK	(__IRQ_MASK(SOFTIRQ_BITS) << SOFTIRQ_SHIFT)
+#define HARDIRQ_MASK	(__IRQ_MASK(HARDIRQ_BITS) << HARDIRQ_SHIFT)
+#define NMI_MASK	(__IRQ_MASK(NMI_BITS)     << NMI_SHIFT)
+
+#define PREEMPT_OFFSET	(1UL << PREEMPT_SHIFT)
+#define SOFTIRQ_OFFSET	(1UL << SOFTIRQ_SHIFT)
+#define HARDIRQ_OFFSET	(1UL << HARDIRQ_SHIFT)
+#define NMI_OFFSET	(1UL << NMI_SHIFT)
+
+#define SOFTIRQ_DISABLE_OFFSET	(2 * SOFTIRQ_OFFSET)
+
+#ifndef PREEMPT_ACTIVE
+#define PREEMPT_ACTIVE_BITS	1
+#define PREEMPT_ACTIVE_SHIFT	(NMI_SHIFT + NMI_BITS)
+#define PREEMPT_ACTIVE	(__IRQ_MASK(PREEMPT_ACTIVE_BITS) << PREEMPT_ACTIVE_SHIFT)
+#endif
+
+#if PREEMPT_ACTIVE < (1 << (NMI_SHIFT + NMI_BITS))
+#error PREEMPT_ACTIVE is too low!
+#endif
+
+#define hardirq_count()	(preempt_count() & HARDIRQ_MASK)
+#define softirq_count()	(preempt_count() & SOFTIRQ_MASK)
+#define irq_count()	(preempt_count() & (HARDIRQ_MASK | SOFTIRQ_MASK \
+				 | NMI_MASK))
+
+/*
+ * Are we doing bottom half or hardware interrupt processing?
+ * Are we in a softirq context? Interrupt context?
+ * in_softirq - Are we currently processing softirq or have bh disabled?
+ * in_serving_softirq - Are we currently processing softirq?
+ */
+#define in_irq()		(hardirq_count())
+#define in_softirq()		(softirq_count())
+#define in_interrupt()		(irq_count())
+#define in_serving_softirq()	(softirq_count() & SOFTIRQ_OFFSET)
+
+/*
+ * Are we in NMI context?
+ */
+#define in_nmi()	(preempt_count() & NMI_MASK)
+
+#if defined(CONFIG_PREEMPT_COUNT)
+# define PREEMPT_CHECK_OFFSET 1
+#else
+# define PREEMPT_CHECK_OFFSET 0
+#endif
+
+/*
+ * Are we running in atomic context?  WARNING: this macro cannot
+ * always detect atomic context; in particular, it cannot know about
+ * held spinlocks in non-preemptible kernels.  Thus it should not be
+ * used in the general case to determine whether sleeping is possible.
+ * Do not use in_atomic() in driver code.
+ */
+#define in_atomic()	((preempt_count() & ~PREEMPT_ACTIVE) != 0)
+
+/*
+ * Check whether we were atomic before we did preempt_disable():
+ * (used by the scheduler, *after* releasing the kernel lock)
+ */
+#define in_atomic_preempt_off() \
+		((preempt_count() & ~PREEMPT_ACTIVE) != PREEMPT_CHECK_OFFSET)
+
+#ifdef CONFIG_PREEMPT_COUNT
+# define preemptible()	(preempt_count() == 0 && !irqs_disabled())
+#else
+# define preemptible()	0
+#endif
+
+#endif /* LINUX_PREEMPT_MASK_H */
-- 
1.7.5.4