From: Mike Galbraith <bitbucket@online.de>
To: Peter Zijlstra <peterz@infradead.org>
Cc: Ethan Zhao <ethan.kernel@gmail.com>,
Thomas Gleixner <tglx@linutronix.de>,
Ingo Molnar <mingo@kernel.org>,
LKML <linux-kernel@vger.kernel.org>,
johlstei@codeaurora.org, Yinghai Lu <yinghai@kernel.org>,
Jin Feng <joe.jin@oracle.com>
Subject: Re: [PATCH V3]hrtimer: Fix a performance regression by disable reprogramming in remove_hrtimer
Date: Tue, 06 Aug 2013 09:29:00 +0200 [thread overview]
Message-ID: <1375774140.5412.9.camel@marge.simpson.net> (raw)
In-Reply-To: <20130730093519.GP3008@twins.programming.kicks-ass.net>
On Tue, 2013-07-30 at 11:35 +0200, Peter Zijlstra wrote:
> It would be good if you could do what Thomas suggested and look at which
> timer is actually active during your workload.
Rebuilding regression test trees, some pipe-test results...
I'm missing mwait_idle() rather a lot on Q6600, and at 3.8, E5620 took a
severe NOHZ drubbing from the menu governor.
pipe-test, scheduling cross core
NOTE: nohz is throttled here (patchlet below), as to not eat horrible
microidle cost, see E5620 v3.7.10-nothrottle below.
Q6600
v3.8.13 500.6 KHz 1.000
v3.9.11 422.4 KHz .843
v3.10.4 420.2 KHz .839
v3.11-rc3-4-g36f571e 404.7 KHz .808
Q6600 3.9 regression:
guilty party is 69fb3676 x86 idle: remove mwait_idle() and "idle=mwait" cmdline param
halt sucks, HTH does one activate mwait_idle_with_hints() [processor_idle()] for core2 boxen?
E5620 +write 0 -> /dev/cpu_dma_latency, hold open
v3.7.10 578.5 KHz 1.000 675.4 KHz 1.000
v3.7.10-nothrottle 366.7 KHz .633 395.0 KHz .584
v3.8.13 468.3 KHz .809 690.0 KHz 1.021
v3.8.13 idle=mwait 595.1 KHz 1.028 NA
v3.9.11 462.0 KHz .798 691.1 KHz 1.023
v3.10.4 419.4 KHz .724 570.8 KHz .845
v3.11-rc3-4-g36f571e 400.1 KHz .691 538.5 KHz .797
E5620 3.8 regression:
guilty party: 69a37bea cpuidle: Quickly notice prediction failure for repeat mode
Q6600 (2.4 GHz core2 quad)
v3.11-rc3-4-g36f571e v3.8.13
7.97% [k] reschedule_interrupt 8.63% [k] __schedule
6.27% [k] __schedule 6.07% [k] native_sched_clock
4.74% [k] native_sched_clock 4.96% [k] system_call
4.23% [k] _raw_spin_lock_irqsave 4.30% [k] _raw_spin_lock_irqsave
3.39% [k] system_call 4.06% [k] resched_task
2.89% [k] sched_clock_local 3.44% [k] sched_clock_local
2.79% [k] mutex_lock 3.39% [k] pipe_read
2.57% [k] pipe_read 3.21% [k] mutex_lock
2.55% [k] __switch_to 2.98% [k] read_tsc
2.24% [k] read_tsc 2.87% [k] __switch_to
E5620 (2.4 GHz Westmere quad)
v3.7.10 v3.7.10-nothrottle v3.7.10-nothrottle
8.01% [k] __schedule 25.80% [k] _raw_spin_unlock_irqrestore 21.80% [k] _raw_spin_unlock_irqrestore
4.49% [k] resched_tas 4.64% [k] __hrtimer_start_range_ns - _raw_spin_unlock_irqrestore
3.94% [k] mutex_lock 4.62% [k] timerqueue_add + 37.94% __hrtimer_start_range_ns
3.44% [k] __switch_to 4.54% [k] __schedule 19.69% hrtimer_cancel
3.18% [k] menu_select 2.84% [k] enqueue_hrtimer tick_nohz_restart
3.05% [k] copy_user_generic_string 2.64% [k] resched_task tick_nohz_idle_exit
3.02% [k] task_waking_fair 2.29% [k] _raw_spin_lock_irqsave cpu_idle
2.91% [k] mutex_unlock 2.28% [k] mutex_lock start_secondary
2.82% [k] pipe_read 1.96% [k] __switch_to + 16.05% hrtimer_start_range_ns
2.32% [k] ktime_get_real 1.73% [k] menu_select 15.46% hrtimer_start
tick_nohz_stop_sched_tick
__tick_nohz_idle_enter
tick_nohz_idle_enter
cpu_idle
start_secondary
6.37% hrtimer_try_to_cancel
hrtimer_cancel
tick_nohz_restart
tick_nohz_idle_exit
cpu_idle
start_secondary
v3.8.13 v3.8.13 idle=mwait v3.8.13 (throttled, but menu gov bites.. HARD)
23.16% [k] _raw_spin_unlock_irqrestore 8.35% [k] __schedule - 22.91% [k] _raw_spin_unlock_irqrestore
4.93% [k] __schedule 6.49% [k] __switch_to - _raw_spin_unlock_irqrestore
3.42% [k] resched_task 5.71% [k] resched_task - 47.26% hrtimer_try_to_cancel
3.27% [k] __switch_to 4.64% [k] mutex_lock hrtimer_cancel
3.05% [k] mutex_lock 3.48% [k] copy_user_generic_string menu_hrtimer_cancel
2.32% [k] copy_user_generic_string 3.15% [k] task_waking_fair tick_nohz_idle_exit
2.30% [k] _raw_spin_lock_irqsave 3.13% [k] pipe_read cpu_idle
2.15% [k] pipe_read 2.61% [k] mutex_unlock start_secondary
2.15% [k] task_waking_fair 2.54% [k] finish_task_switch - 40.01% __hrtimer_start_range_ns
2.08% [k] ktime_get 2.29% [k] _raw_spin_lock_irqsave hrtimer_start
1.87% [k] mutex_unlock 1.91% [k] idle_cpu menu_select
1.76% [k] finish_task_switch 1.84% [k] __wake_up_common cpuidle_idle_call
cpu_idle
start_secondary
v3.9.11
18.67% [k] _raw_spin_unlock_irqrestore
4.36% [k] __schedule
3.66% [k] __switch_to
3.13% [k] mutex_lock
2.97% [k] __hrtimer_start_range_ns
2.69% [k] _raw_spin_lock_irqsave
2.38% [k] copy_user_generic_string
2.34% [k] hrtimer_reprogram.isra.32
2.34% [k] task_waking_fair
2.25% [k] ktime_get
2.14% [k] pipe_read
1.98% [k] menu_select
v3.10.4
20.42% [k] _raw_spin_unlock_irqrestore
4.75% [k] __schedule
4.42% [k] reschedule_interrupt <== appears in 3.10, guilty party as yet unknown
3.52% [k] __switch_to
3.27% [k] resched_task
2.64% [k] cpuidle_enter_state
2.63% [k] _raw_spin_lock_irqsave
2.04% [k] copy_user_generic_string
2.00% [k] cpu_idle_loop
1.97% [k] mutex_lock
1.90% [k] ktime_get
1.75% [k] task_waking_fair
v3.11-rc3-4-g36f571e
18.96% [k] _raw_spin_unlock_irqrestore
4.84% [k] __schedule
4.69% [k] reschedule_interrupt
3.75% [k] __switch_to
2.62% [k] _raw_spin_lock_irqsave
2.43% [k] cpuidle_enter_state
2.28% [k] resched_task
2.20% [k] cpu_idle_loop
1.97% [k] copy_user_generic_string
1.88% [k] ktime_get
1.81% [k] task_waking_fair
1.75% [k] mutex_lock
sched: ratelimit nohz
Entering nohz code on every micro-idle is too expensive to bear.
Signed-off-by: Mike Galbraith <efault@gmx.de>
---
include/linux/sched.h | 5 +++++
kernel/sched/core.c | 5 +++++
kernel/time/tick-sched.c | 2 +-
3 files changed, 11 insertions(+), 1 deletion(-)
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -235,9 +235,14 @@ extern int runqueue_is_locked(int cpu);
extern void nohz_balance_enter_idle(int cpu);
extern void set_cpu_sd_state_idle(void);
extern int get_nohz_timer_target(void);
+extern int sched_needs_cpu(int cpu);
#else
static inline void nohz_balance_enter_idle(int cpu) { }
static inline void set_cpu_sd_state_idle(void) { }
+static inline int sched_needs_cpu(int cpu)
+{
+ return 0;
+}
#endif
/*
--- a/kernel/sched/core.c
+++ b/kernel/sched/core.c
@@ -650,6 +650,11 @@ static inline bool got_nohz_idle_kick(vo
return false;
}
+int sched_needs_cpu(int cpu)
+{
+ return cpu_rq(cpu)->avg_idle < sysctl_sched_migration_cost;
+}
+
#else /* CONFIG_NO_HZ_COMMON */
static inline bool got_nohz_idle_kick(void)
--- a/kernel/time/tick-sched.c
+++ b/kernel/time/tick-sched.c
@@ -548,7 +548,7 @@ static ktime_t tick_nohz_stop_sched_tick
time_delta = timekeeping_max_deferment();
} while (read_seqretry(&jiffies_lock, seq));
- if (rcu_needs_cpu(cpu, &rcu_delta_jiffies) ||
+ if (sched_needs_cpu(cpu) || rcu_needs_cpu(cpu, &rcu_delta_jiffies) ||
arch_needs_cpu(cpu) || irq_work_needs_cpu()) {
next_jiffies = last_jiffies + 1;
delta_jiffies = 1;
next prev parent reply other threads:[~2013-08-06 7:29 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-07-27 20:04 ethan.kernel
2013-07-29 10:18 ` Thomas Gleixner
2013-07-29 11:57 ` Peter Zijlstra
2013-08-08 7:32 ` ethan.zhao
2013-09-05 6:36 ` Mike Galbraith
[not found] ` <20130905111428.GB23362@gmail.com>
[not found] ` <1378386697.6567.9.camel@marge.simpson.net>
[not found] ` <20130905133750.GA26637@gmail.com>
[not found] ` <1378445942.5434.31.camel@marge.simpson.net>
[not found] ` <20130909122325.GX31370@twins.programming.kicks-ass.net>
[not found] ` <1378730538.5586.30.camel@marge.simpson.net>
2013-09-09 13:30 ` Peter Zijlstra
2013-09-09 13:46 ` Peter Zijlstra
2013-09-11 8:56 ` Peter Zijlstra
2013-09-11 10:25 ` Mike Galbraith
2013-10-04 12:06 ` Ethan Zhao
2013-10-07 4:41 ` Mike Galbraith
2013-10-07 4:57 ` Ethan Zhao
2013-12-12 14:14 ` Ethan Zhao
2013-12-12 14:42 ` Mike Galbraith
[not found] ` <CABawtvP4oLuvHOS3prbbgPShXVziV_wTo7i6KCqJ9KkoVdz0ag@mail.gmail.com>
2013-07-30 9:35 ` Peter Zijlstra
2013-07-30 11:44 ` Ethan Zhao
2013-07-30 11:59 ` Peter Zijlstra
2013-08-03 6:55 ` ethan
2013-08-03 7:37 ` ethan
2013-08-06 7:29 ` Mike Galbraith [this message]
2013-08-06 7:46 ` Mike Galbraith
2013-08-08 4:31 ` ethan.zhao
2013-08-08 5:29 ` Mike Galbraith
2013-08-08 5:51 ` Mike Galbraith
2013-08-08 9:04 ` ethan.zhao
2013-08-08 9:05 ` ethan.zhao
2013-08-08 12:14 ` Mike Galbraith
2013-08-07 8:25 ` Mike Galbraith
2013-08-08 4:05 ` Mike Galbraith
2013-08-08 15:02 ` ethan.zhao
2013-08-09 6:52 ` Mike Galbraith
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1375774140.5412.9.camel@marge.simpson.net \
--to=bitbucket@online.de \
--cc=ethan.kernel@gmail.com \
--cc=joe.jin@oracle.com \
--cc=johlstei@codeaurora.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@kernel.org \
--cc=peterz@infradead.org \
--cc=tglx@linutronix.de \
--cc=yinghai@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome