From: Keerthy <j-keerthy@ti.com>
To: <devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Cc: <swarren@wwwdotorg.org>, <rob.herring@calxeda.com>,
<pawel.moll@arm.com>, <mark.rutland@arm.com>, <nm@ti.com>,
<balajitk@ti.com>, <j-keerthy@ti.com>
Subject: [PATCH] ARM: DTS: DRA7: Add TPS659038 PMIC nodes
Date: Tue, 13 Aug 2013 11:12:36 +0530 [thread overview]
Message-ID: <1376372556-4244-1-git-send-email-j-keerthy@ti.com> (raw)
The Patch adds nodes for TPS659038 PMIC for DRA7 boards.
It is based on:
http://comments.gmane.org/gmane.linux.ports.arm.omap/102459.
Documentation: Documentation/devicetree/bindings/mfd/palmas.txt
Documentation/devicetree/bindings/regulator/palmas-pmic.txt
Tested on DRA7 Board, 3.11-rc5 plus the above patch-set.
Signed-off-by: Keerthy <j-keerthy@ti.com>
---
arch/arm/boot/dts/dra7-evm.dts | 118 ++++++++++++++++++++++++++++++++++++++++
1 file changed, 118 insertions(+)
diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts
index b270e24..96f409f 100644
--- a/arch/arm/boot/dts/dra7-evm.dts
+++ b/arch/arm/boot/dts/dra7-evm.dts
@@ -93,6 +93,124 @@
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins>;
clock-frequency = <400000>;
+
+ tps659038: tps659038@58 {
+ compatible = "ti,tps659038";
+ reg = <0x58>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ tps659038_pmic {
+ compatible = "ti,tps659038-pmic";
+
+ regulators {
+ smps123_reg: smps123 {
+ /* VDD_MPU */
+ regulator-name = "smps123";
+ regulator-min-microvolt = < 600000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ smps45_reg: smps45 {
+ /* VDD_DSPEVE */
+ regulator-name = "smps45";
+ regulator-min-microvolt = < 600000>;
+ regulator-max-microvolt = <1310000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ smps6_reg: smps6 {
+ /* VDD_GPU - over VDD_SMPS6 */
+ regulator-name = "smps6";
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <13100000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ smps7_reg: smps7 {
+ /* VDDS_CORE */
+ regulator-name = "smps7";
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <1310000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ smps8_reg: smps8 {
+ /* VDD_IVAHD */
+ regulator-name = "smps8";
+ regulator-min-microvolt = < 600000>;
+ regulator-max-microvolt = <1310000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ smps9_reg: smps9 {
+ /* VDD_1V8 */
+ regulator-name = "smps9";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldo1_reg: ldo1 {
+ /* LDO1_OUT --> SDIO */
+ regulator-name = "ldo1";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ ldo2_reg: ldo2 {
+ /* VDD_RTCIO */
+ regulator-name = "ldo2";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldo3_reg: ldo3 {
+ /* VDDA_1V8 PHYs */
+ regulator-name = "ldo3";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo9_reg: ldo9 {
+ /* VDD_RTC */
+ regulator-name = "ldo9";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldoln_reg: ldoln {
+ /* VDDA_1v8: PLLs */
+ regulator-name = "ldoln";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldousb_reg: ldousb {
+ /* VDDA_3V_USB: VDDA_USBHS33 */
+ regulator-name = "ldousb";
+ regulator-min-microvolt = <3250000>;
+ regulator-max-microvolt = <3250000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ };
+ };
+ };
};
&i2c2 {
--
1.7.9.5
next reply other threads:[~2013-08-13 5:46 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-08-13 5:42 Keerthy [this message]
2013-08-14 23:35 ` Nishanth Menon
2013-08-16 8:46 ` Balaji T K
2013-08-16 9:01 ` Keerthy
2013-08-26 5:36 Keerthy
2013-09-03 6:33 ` Keerthy
2013-09-09 19:21 ` Nishanth Menon
2013-09-11 5:30 ` Keerthy
2013-10-03 13:39 ` Benoit Cousson
2013-10-04 8:25 ` Keerthy
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1376372556-4244-1-git-send-email-j-keerthy@ti.com \
--to=j-keerthy@ti.com \
--cc=balajitk@ti.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=nm@ti.com \
--cc=pawel.moll@arm.com \
--cc=rob.herring@calxeda.com \
--cc=swarren@wwwdotorg.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®