From: "Ivan T. Ivanov" <iivanov@mm-sol.com>
To: balbi@ti.com
Cc: rob.herring@calxeda.com, pawel.moll@arm.com,
mark.rutland@arm.com, swarren@wwwdotorg.org,
ian.campbell@citrix.com, rob@landley.net,
gregkh@linuxfoundation.org, grant.likely@linaro.org,
idos@codeaurora.org, mgautam@codeaurora.org,
devicetree@vger.kernel.org, linux-doc@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-usb@vger.kernel.org,
linux-omap@vger.kernel.org, linux-arm-msm@vger.kernel.org,
"Ivan T. Ivanov" <iivanov@mm-sol.com>
Subject: [PATCH v3 0/3] DWC3 USB support for Qualcomm platform
Date: Wed, 14 Aug 2013 15:59:40 +0300 [thread overview]
Message-ID: <1376485183-2664-1-git-send-email-iivanov@mm-sol.com> (raw)
From: "Ivan T. Ivanov" <iivanov@mm-sol.com>
Hi,
These patches add basic support for USB3.0 controllers found
on MSM platforms. USB3.0 core is based on Synopsys DesignWare
SuperSpeed IP.
Changes since v2:
* Several improvements in devicetree bindings description
* Disable regulators in glue layer if there is error during
ioremap.
Changes since first version:
* Split devicetree bindings description file to separate patch
* Address comments for device bindings description
* Fix typo in 'gdsc' requlator name.
Generated on top of Felipe 'testing' branch.
Regards,
Ivan
Ivan T. Ivanov (3):
usb: dwc3: msm: Add device tree binding information
usb: phy: Add Qualcomm SS-USB and HS-USB drivers for DWC3 core
usb: dwc3: Add Qualcomm DWC3 glue layer driver
.../devicetree/bindings/usb/msm-ssusb.txt | 108 ++++++
drivers/usb/dwc3/Kconfig | 8 +
drivers/usb/dwc3/Makefile | 1 +
drivers/usb/dwc3/dwc3-msm.c | 169 +++++++++
drivers/usb/phy/Kconfig | 11 +
drivers/usb/phy/Makefile | 2 +
drivers/usb/phy/phy-msm-dwc3-hs.c | 336 +++++++++++++++++
drivers/usb/phy/phy-msm-dwc3-ss.c | 383 ++++++++++++++++++++
8 files changed, 1018 insertions(+)
create mode 100644 Documentation/devicetree/bindings/usb/msm-ssusb.txt
create mode 100644 drivers/usb/dwc3/dwc3-msm.c
create mode 100644 drivers/usb/phy/phy-msm-dwc3-hs.c
create mode 100644 drivers/usb/phy/phy-msm-dwc3-ss.c
--
1.7.9.5
next reply other threads:[~2013-08-14 13:01 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-08-14 12:59 Ivan T. Ivanov [this message]
2013-08-14 12:59 ` [PATCH v3 1/3] usb: dwc3: msm: Add device tree binding information Ivan T. Ivanov
2013-08-16 22:44 ` Stephen Warren
2013-08-19 12:27 ` Ivan T. Ivanov
2013-08-19 16:21 ` Stephen Warren
2013-08-19 16:30 ` Stephen Boyd
2013-08-14 12:59 ` [PATCH v3 2/3] usb: phy: Add Qualcomm SS-USB and HS-USB drivers for DWC3 core Ivan T. Ivanov
2013-08-14 14:20 ` Josh Cartwright
2013-08-14 14:54 ` Ivan T. Ivanov
2013-08-14 12:59 ` [PATCH v3 3/3] usb: dwc3: Add Qualcomm DWC3 glue layer driver Ivan T. Ivanov
2013-08-14 16:06 ` Stephen Boyd
2013-08-14 19:11 ` Ivan T. Ivanov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1376485183-2664-1-git-send-email-iivanov@mm-sol.com \
--to=iivanov@mm-sol.com \
--cc=balbi@ti.com \
--cc=devicetree@vger.kernel.org \
--cc=grant.likely@linaro.org \
--cc=gregkh@linuxfoundation.org \
--cc=ian.campbell@citrix.com \
--cc=idos@codeaurora.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-doc@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=mgautam@codeaurora.org \
--cc=pawel.moll@arm.com \
--cc=rob.herring@calxeda.com \
--cc=rob@landley.net \
--cc=swarren@wwwdotorg.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome