mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Maxime Ripard <maxime.ripard@free-electrons.com>
To: Mike Turquette <mturquette@linaro.org>
Cc: Emilio Lopez <emilio@elopez.com.ar>,
	kevin.z.m.zh@gmail.com, sunny@allwinnertech.com,
	shuge@allwinnertech.com, linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, linux-sunxi@googlegroups.com,
	Maxime Ripard <maxime.ripard@free-electrons.com>
Subject: [PATCH 1/2] clk: sunxi: Add Allwinner A20 gates
Date: Sat, 17 Aug 2013 21:08:42 +0200	[thread overview]
Message-ID: <1376766523-9107-2-git-send-email-maxime.ripard@free-electrons.com> (raw)
In-Reply-To: <1376766523-9107-1-git-send-email-maxime.ripard@free-electrons.com>

The Allwinner A20 is almost identical to the earlier A10 SoC from
Allwinner on many aspects, including the clocks tree. However, since the
A20 has some additionnal IPs compared to the A10, the clock tree isn't
exactly the same, especially when it comes to the gated clocks
available. We thus need to register different clock gates for the A20.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
---
 Documentation/devicetree/bindings/clock/sunxi.txt  |  3 +
 .../bindings/clock/sunxi/sun7i-a20-gates.txt       | 98 ++++++++++++++++++++++
 drivers/clk/sunxi/clk-sunxi.c                      | 15 ++++
 3 files changed, 116 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/clock/sunxi/sun7i-a20-gates.txt

diff --git a/Documentation/devicetree/bindings/clock/sunxi.txt b/Documentation/devicetree/bindings/clock/sunxi.txt
index c383d12..00a5c264 100644
--- a/Documentation/devicetree/bindings/clock/sunxi.txt
+++ b/Documentation/devicetree/bindings/clock/sunxi.txt
@@ -16,18 +16,21 @@ Required properties:
 	"allwinner,sun4i-ahb-gates-clk" - for the AHB gates on A10
 	"allwinner,sun5i-a13-ahb-gates-clk" - for the AHB gates on A13
 	"allwinner,sun5i-a10s-ahb-gates-clk" - for the AHB gates on A10s
+	"allwinner,sun7i-a20-ahb-gates-clk" - for the AHB gates on A20
 	"allwinner,sun6i-a31-ahb1-mux-clk" - for the AHB1 multiplexer on A31
 	"allwinner,sun6i-a31-ahb1-gates-clk" - for the AHB1 gates on A31
 	"allwinner,sun4i-apb0-clk" - for the APB0 clock
 	"allwinner,sun4i-apb0-gates-clk" - for the APB0 gates on A10
 	"allwinner,sun5i-a13-apb0-gates-clk" - for the APB0 gates on A13
 	"allwinner,sun5i-a10s-apb0-gates-clk" - for the APB0 gates on A10s
+	"allwinner,sun7i-a20-apb0-gates-clk" - for the APB0 gates on A20
 	"allwinner,sun4i-apb1-clk" - for the APB1 clock
 	"allwinner,sun4i-apb1-mux-clk" - for the APB1 clock muxing
 	"allwinner,sun4i-apb1-gates-clk" - for the APB1 gates on A10
 	"allwinner,sun5i-a13-apb1-gates-clk" - for the APB1 gates on A13
 	"allwinner,sun5i-a10s-apb1-gates-clk" - for the APB1 gates on A10s
 	"allwinner,sun6i-a31-apb1-gates-clk" - for the APB1 gates on A31
+	"allwinner,sun7i-a20-apb1-gates-clk" - for the APB1 gates on A20
 	"allwinner,sun6i-a31-apb2-div-clk" - for the APB2 gates on A31
 	"allwinner,sun6i-a31-apb2-gates-clk" - for the APB2 gates on A31
 
diff --git a/Documentation/devicetree/bindings/clock/sunxi/sun7i-a20-gates.txt b/Documentation/devicetree/bindings/clock/sunxi/sun7i-a20-gates.txt
new file mode 100644
index 0000000..357f4fd
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/sunxi/sun7i-a20-gates.txt
@@ -0,0 +1,98 @@
+Gate clock outputs
+------------------
+
+  * AXI gates ("allwinner,sun4i-axi-gates-clk")
+
+    DRAM					0
+
+  * AHB gates ("allwinner,sun7i-a20-ahb-gates-clk")
+
+    USB0					0
+    EHCI0					1
+    OHCI0					2
+    EHCI1					3
+    OHCI1					4
+    SS						5
+    DMA						6
+    BIST					7
+    MMC0					8
+    MMC1					9
+    MMC2					10
+    MMC3					11
+    MS						12
+    NAND					13
+    SDRAM					14
+
+    ACE						16
+    EMAC					17
+    TS						18
+
+    SPI0					20
+    SPI1					21
+    SPI2					22
+    SPI3					23
+
+    SATA					25
+
+    HSTIMER					28
+
+    VE						32
+    TVD						33
+    TVE0					34
+    TVE1					35
+    LCD0					36
+    LCD1					37
+
+    CSI0					40
+    CSI1					41
+
+    HDMI1					42
+    HDMI0					43
+    DE_BE0					44
+    DE_BE1					45
+    DE_FE1					46
+    DE_FE1					47
+
+    GMAC					49
+    MP						50
+
+    MALI400					52
+
+  * APB0 gates ("allwinner,sun7i-a20-apb0-gates-clk")
+
+    CODEC					0
+    SPDIF					1
+    AC97					2
+    IIS0					3
+    IIS1					4
+    PIO						5
+    IR0						6
+    IR1						7
+    IIS2					8
+
+    KEYPAD					10
+
+  * APB1 gates ("allwinner,sun7i-a20-apb1-gates-clk")
+
+    I2C0					0
+    I2C1					1
+    I2C2					2
+    I2C3					3
+    CAN						4
+    SCR						5
+    PS20					6
+    PS21					7
+
+    I2C4					15
+    UART0					16
+    UART1					17
+    UART2					18
+    UART3					19
+    UART4					20
+    UART5					21
+    UART6					22
+    UART7					23
+
+Notation:
+ [*]:  The datasheet didn't mention these, but they are present on AW code
+ [**]: The datasheet had this marked as "NC" but they are used on AW code
diff --git a/drivers/clk/sunxi/clk-sunxi.c b/drivers/clk/sunxi/clk-sunxi.c
index bd01a02..c359775 100644
--- a/drivers/clk/sunxi/clk-sunxi.c
+++ b/drivers/clk/sunxi/clk-sunxi.c
@@ -462,6 +462,10 @@ static const __initconst struct gates_data sun6i_a31_ahb1_gates_data = {
 	.mask = {0xEDFE7F62, 0x794F931},
 };
 
+static const __initconst struct gates_data sun7i_a20_ahb_gates_data = {
+	.mask = { 0x12f77fff, 0x16ff3f },
+};
+
 static const __initconst struct gates_data sun4i_apb0_gates_data = {
 	.mask = {0x4EF},
 };
@@ -474,6 +478,10 @@ static const __initconst struct gates_data sun5i_a13_apb0_gates_data = {
 	.mask = {0x61},
 };
 
+static const __initconst struct gates_data sun7i_a20_apb0_gates_data = {
+	.mask = { 0x4ff },
+};
+
 static const __initconst struct gates_data sun4i_apb1_gates_data = {
 	.mask = {0xFF00F7},
 };
@@ -494,6 +502,10 @@ static const __initconst struct gates_data sun6i_a31_apb2_gates_data = {
 	.mask = {0x3F000F},
 };
 
+static const __initconst struct gates_data sun7i_a20_apb1_gates_data = {
+	.mask = { 0xff80ff },
+};
+
 static void __init sunxi_gates_clk_setup(struct device_node *node,
 					 struct gates_data *data)
 {
@@ -575,13 +587,16 @@ static const __initconst struct of_device_id clk_gates_match[] = {
 	{.compatible = "allwinner,sun5i-a10s-ahb-gates-clk", .data = &sun5i_a10s_ahb_gates_data,},
 	{.compatible = "allwinner,sun5i-a13-ahb-gates-clk", .data = &sun5i_a13_ahb_gates_data,},
 	{.compatible = "allwinner,sun6i-a31-ahb1-gates-clk", .data = &sun6i_a31_ahb1_gates_data,},
+	{.compatible = "allwinner,sun7i-a20-ahb-gates-clk", .data = &sun7i_a20_ahb_gates_data,},
 	{.compatible = "allwinner,sun4i-apb0-gates-clk", .data = &sun4i_apb0_gates_data,},
 	{.compatible = "allwinner,sun5i-a10s-apb0-gates-clk", .data = &sun5i_a10s_apb0_gates_data,},
 	{.compatible = "allwinner,sun5i-a13-apb0-gates-clk", .data = &sun5i_a13_apb0_gates_data,},
+	{.compatible = "allwinner,sun7i-a20-apb0-gates-clk", .data = &sun7i_a20_apb0_gates_data,},
 	{.compatible = "allwinner,sun4i-apb1-gates-clk", .data = &sun4i_apb1_gates_data,},
 	{.compatible = "allwinner,sun5i-a10s-apb1-gates-clk", .data = &sun5i_a10s_apb1_gates_data,},
 	{.compatible = "allwinner,sun5i-a13-apb1-gates-clk", .data = &sun5i_a13_apb1_gates_data,},
 	{.compatible = "allwinner,sun6i-a31-apb1-gates-clk", .data = &sun6i_a31_apb1_gates_data,},
+	{.compatible = "allwinner,sun7i-a20-apb1-gates-clk", .data = &sun7i_a20_apb1_gates_data,},
 	{.compatible = "allwinner,sun6i-a31-apb2-gates-clk", .data = &sun6i_a31_apb2_gates_data,},
 	{}
 };
-- 
1.8.3.4


  reply	other threads:[~2013-08-17 19:09 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-08-17 19:08 [PATCH 0/2] clk: sunxi: Add support for the A20 clocks Maxime Ripard
2013-08-17 19:08 ` Maxime Ripard [this message]
2013-08-19 21:09   ` [PATCH 1/2] clk: sunxi: Add Allwinner A20 gates Emilio López
2013-08-17 19:08 ` [PATCH 2/2] ARM: sun7i: Enable the A20 clocks in the DTSI Maxime Ripard

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1376766523-9107-2-git-send-email-maxime.ripard@free-electrons.com \
    --to=maxime.ripard@free-electrons.com \
    --cc=emilio@elopez.com.ar \
    --cc=kevin.z.m.zh@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-sunxi@googlegroups.com \
    --cc=mturquette@linaro.org \
    --cc=shuge@allwinnertech.com \
    --cc=sunny@allwinnertech.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®