From: Masanari Iida <standby24x7@gmail.com>
To: trivial@kernel.org, linux-kernel@vger.kernel.org, rob@landley.net
Cc: rdunlap@infradead.org, Masanari Iida <standby24x7@gmail.com>
Subject: [PATCH] doc: devicetree: Fit typos in devicegree/bindings
Date: Tue, 20 Aug 2013 21:34:56 +0900 [thread overview]
Message-ID: <1377002096-16088-1-git-send-email-standby24x7@gmail.com> (raw)
Correct spelling typos in Documentations/devicetree/bindings
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
---
Documentation/devicetree/bindings/gpio/mrvl-gpio.txt | 2 +-
Documentation/devicetree/bindings/mfd/s2mps11.txt | 2 +-
Documentation/devicetree/bindings/mmc/synopsis-dw-mshc.txt | 2 +-
Documentation/devicetree/bindings/video/atmel,lcdc.txt | 4 ++--
4 files changed, 5 insertions(+), 5 deletions(-)
diff --git a/Documentation/devicetree/bindings/gpio/mrvl-gpio.txt b/Documentation/devicetree/bindings/gpio/mrvl-gpio.txt
index 6641626..99daf57 100644
--- a/Documentation/devicetree/bindings/gpio/mrvl-gpio.txt
+++ b/Documentation/devicetree/bindings/gpio/mrvl-gpio.txt
@@ -12,7 +12,7 @@ Required properties:
gpio_mux.
- interrupt-names : Should be the names of irq resources. Each interrupt
uses its own interrupt name, so there should be as many interrupt names
- as referenced interrups.
+ as referenced interrupts.
- interrupt-controller : Identifies the node as an interrupt controller.
- #interrupt-cells: Specifies the number of cells needed to encode an
interrupt source.
diff --git a/Documentation/devicetree/bindings/mfd/s2mps11.txt b/Documentation/devicetree/bindings/mfd/s2mps11.txt
index c9332c6..31f952f 100644
--- a/Documentation/devicetree/bindings/mfd/s2mps11.txt
+++ b/Documentation/devicetree/bindings/mfd/s2mps11.txt
@@ -41,7 +41,7 @@ sub-node should be of the format as listed below.
regulator-ramp-delay for BUCKs = [6250/12500/25000(default)/50000] uV/us
- BUCK[2/3/4/6] supports disabling ramp delay on hardware, so explictly
+ BUCK[2/3/4/6] supports disabling ramp delay on hardware, so explicitly
regulator-ramp-delay = <0> can be used for them to disable ramp delay.
In absence of regulator-ramp-delay property, default ramp delay will be used.
diff --git a/Documentation/devicetree/bindings/mmc/synopsis-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/synopsis-dw-mshc.txt
index cdcebea..5486655 100644
--- a/Documentation/devicetree/bindings/mmc/synopsis-dw-mshc.txt
+++ b/Documentation/devicetree/bindings/mmc/synopsis-dw-mshc.txt
@@ -16,7 +16,7 @@ Required Properties:
each child-node representing a supported slot. There should be atleast one
child node representing a card slot. The name of the child node representing
the slot is recommended to be slot@n where n is the unique number of the slot
- connnected to the controller. The following are optional properties which
+ connected to the controller. The following are optional properties which
can be included in the slot child node.
* reg: specifies the physical slot number. The valid values of this
diff --git a/Documentation/devicetree/bindings/video/atmel,lcdc.txt b/Documentation/devicetree/bindings/video/atmel,lcdc.txt
index 1ec175e..47981dd 100644
--- a/Documentation/devicetree/bindings/video/atmel,lcdc.txt
+++ b/Documentation/devicetree/bindings/video/atmel,lcdc.txt
@@ -39,8 +39,8 @@ Atmel LCDC Display
-----------------------------------------------------
Required properties (as per of_videomode_helper):
- - atmel,dmacon: dma controler configuration
- - atmel,lcdcon2: lcd controler configuration
+ - atmel,dmacon: dma controller configuration
+ - atmel,lcdcon2: lcd controller configuration
- atmel,guard-time: lcd guard time (Delay in frame periods)
- bits-per-pixel: lcd panel bit-depth.
--
1.8.4.rc3.2.g2c2b664
reply other threads:[~2013-08-20 12:35 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1377002096-16088-1-git-send-email-standby24x7@gmail.com \
--to=standby24x7@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=rdunlap@infradead.org \
--cc=rob@landley.net \
--cc=trivial@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®