From: Lee Jones <lee.jones@linaro.org>
To: linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org
Cc: arnd@arndb.de, linus.walleij@linaro.org,
Lee Jones <lee.jones@linaro.org>
Subject: [PATCH 20/40] ARM: ux500: Remove USB support when booting using ATAGs
Date: Fri, 23 Aug 2013 13:23:20 +0100 [thread overview]
Message-ID: <1377260620-18829-21-git-send-email-lee.jones@linaro.org> (raw)
In-Reply-To: <1377260620-18829-1-git-send-email-lee.jones@linaro.org>
It's time to remove all ATAG support from ux500 and rely solely on
Device Tree booting. This patch is part of that endeavour.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
arch/arm/mach-ux500/Makefile | 2 +-
arch/arm/mach-ux500/cpu-db8500.c | 12 ----
arch/arm/mach-ux500/devices-db8500.h | 5 --
arch/arm/mach-ux500/usb.c | 135 -----------------------------------
4 files changed, 1 insertion(+), 153 deletions(-)
delete mode 100644 arch/arm/mach-ux500/usb.c
diff --git a/arch/arm/mach-ux500/Makefile b/arch/arm/mach-ux500/Makefile
index bf9b6be..cac22ba 100644
--- a/arch/arm/mach-ux500/Makefile
+++ b/arch/arm/mach-ux500/Makefile
@@ -3,7 +3,7 @@
#
obj-y := cpu.o devices.o devices-common.o \
- id.o usb.o timer.o pm.o
+ id.o timer.o pm.o
obj-$(CONFIG_CPU_IDLE) += cpuidle.o
obj-$(CONFIG_CACHE_L2X0) += cache-l2x0.o
obj-$(CONFIG_UX500_SOC_DB8500) += cpu-db8500.o devices-db8500.o
diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c
index 12eee81..30024ff 100644
--- a/arch/arm/mach-ux500/cpu-db8500.c
+++ b/arch/arm/mach-ux500/cpu-db8500.c
@@ -162,17 +162,6 @@ static void __init db8500_add_gpios(struct device *parent)
dbx500_add_pinctrl(parent, "pinctrl-db8500", U8500_PRCMU_BASE);
}
-static int usb_db8500_dma_cfg[] = {
- DB8500_DMA_DEV38_USB_OTG_IEP_AND_OEP_1_9,
- DB8500_DMA_DEV37_USB_OTG_IEP_AND_OEP_2_10,
- DB8500_DMA_DEV36_USB_OTG_IEP_AND_OEP_3_11,
- DB8500_DMA_DEV19_USB_OTG_IEP_AND_OEP_4_12,
- DB8500_DMA_DEV18_USB_OTG_IEP_AND_OEP_5_13,
- DB8500_DMA_DEV17_USB_OTG_IEP_AND_OEP_6_14,
- DB8500_DMA_DEV16_USB_OTG_IEP_AND_OEP_7_15,
- DB8500_DMA_DEV39_USB_OTG_IEP_AND_OEP_8
-};
-
static const char *db8500_read_soc_id(void)
{
void __iomem *uid = __io_address(U8500_BB_UID_BASE);
@@ -204,7 +193,6 @@ struct device * __init u8500_init_devices(void)
db8500_add_rtc(parent);
db8500_add_gpios(parent);
- db8500_add_usb(parent, usb_db8500_dma_cfg, usb_db8500_dma_cfg);
for (i = 0; i < ARRAY_SIZE(platform_devs); i++)
platform_devs[i]->dev.parent = parent;
diff --git a/arch/arm/mach-ux500/devices-db8500.h b/arch/arm/mach-ux500/devices-db8500.h
index be1d538..9352400 100644
--- a/arch/arm/mach-ux500/devices-db8500.h
+++ b/arch/arm/mach-ux500/devices-db8500.h
@@ -8,7 +8,6 @@
#ifndef __DEVICES_DB8500_H
#define __DEVICES_DB8500_H
-#include <linux/platform_data/usb-musb-ux500.h>
#include "irqs.h"
#include "db8500-regs.h"
#include "devices-common.h"
@@ -30,10 +29,6 @@ db8500_add_ssp(struct device *parent, const char *name, resource_size_t base,
#define db8500_add_rtc(parent) \
dbx500_add_rtc(parent, U8500_RTC_BASE, IRQ_DB8500_RTC);
-#define db8500_add_usb(parent, rx_cfg, tx_cfg) \
- ux500_add_usb(parent, U8500_USBOTG_BASE, \
- IRQ_DB8500_USBOTG, rx_cfg, tx_cfg)
-
#define db8500_add_ssp0(parent, pdata) \
db8500_add_ssp(parent, "ssp0", U8500_SSP0_BASE, \
IRQ_DB8500_SSP0, pdata)
diff --git a/arch/arm/mach-ux500/usb.c b/arch/arm/mach-ux500/usb.c
deleted file mode 100644
index b7bd8d3..0000000
--- a/arch/arm/mach-ux500/usb.c
+++ /dev/null
@@ -1,135 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2011
- *
- * Author: Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com>
- * License terms: GNU General Public License (GPL) version 2
- */
-#include <linux/platform_device.h>
-#include <linux/usb/musb.h>
-#include <linux/dma-mapping.h>
-#include <linux/platform_data/usb-musb-ux500.h>
-#include <linux/platform_data/dma-ste-dma40.h>
-
-#include "db8500-regs.h"
-
-#define MUSB_DMA40_RX_CH { \
- .mode = STEDMA40_MODE_LOGICAL, \
- .dir = DMA_DEV_TO_MEM, \
- }
-
-#define MUSB_DMA40_TX_CH { \
- .mode = STEDMA40_MODE_LOGICAL, \
- .dir = DMA_MEM_TO_DEV, \
- }
-
-static struct stedma40_chan_cfg musb_dma_rx_ch[UX500_MUSB_DMA_NUM_RX_TX_CHANNELS]
- = {
- MUSB_DMA40_RX_CH,
- MUSB_DMA40_RX_CH,
- MUSB_DMA40_RX_CH,
- MUSB_DMA40_RX_CH,
- MUSB_DMA40_RX_CH,
- MUSB_DMA40_RX_CH,
- MUSB_DMA40_RX_CH,
- MUSB_DMA40_RX_CH
-};
-
-static struct stedma40_chan_cfg musb_dma_tx_ch[UX500_MUSB_DMA_NUM_RX_TX_CHANNELS]
- = {
- MUSB_DMA40_TX_CH,
- MUSB_DMA40_TX_CH,
- MUSB_DMA40_TX_CH,
- MUSB_DMA40_TX_CH,
- MUSB_DMA40_TX_CH,
- MUSB_DMA40_TX_CH,
- MUSB_DMA40_TX_CH,
- MUSB_DMA40_TX_CH,
-};
-
-static void *ux500_dma_rx_param_array[UX500_MUSB_DMA_NUM_RX_TX_CHANNELS] = {
- &musb_dma_rx_ch[0],
- &musb_dma_rx_ch[1],
- &musb_dma_rx_ch[2],
- &musb_dma_rx_ch[3],
- &musb_dma_rx_ch[4],
- &musb_dma_rx_ch[5],
- &musb_dma_rx_ch[6],
- &musb_dma_rx_ch[7]
-};
-
-static void *ux500_dma_tx_param_array[UX500_MUSB_DMA_NUM_RX_TX_CHANNELS] = {
- &musb_dma_tx_ch[0],
- &musb_dma_tx_ch[1],
- &musb_dma_tx_ch[2],
- &musb_dma_tx_ch[3],
- &musb_dma_tx_ch[4],
- &musb_dma_tx_ch[5],
- &musb_dma_tx_ch[6],
- &musb_dma_tx_ch[7]
-};
-
-static struct ux500_musb_board_data musb_board_data = {
- .dma_rx_param_array = ux500_dma_rx_param_array,
- .dma_tx_param_array = ux500_dma_tx_param_array,
- .dma_filter = stedma40_filter,
-};
-
-static struct musb_hdrc_platform_data musb_platform_data = {
- .mode = MUSB_OTG,
- .board_data = &musb_board_data,
-};
-
-static struct resource usb_resources[] = {
- [0] = {
- .name = "usb-mem",
- .flags = IORESOURCE_MEM,
- },
-
- [1] = {
- .name = "mc", /* hard-coded in musb */
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device ux500_musb_device = {
- .name = "musb-ux500",
- .id = 0,
- .dev = {
- .platform_data = &musb_platform_data,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
- .num_resources = ARRAY_SIZE(usb_resources),
- .resource = usb_resources,
-};
-
-static inline void ux500_usb_dma_update_rx_ch_config(int *dev_type)
-{
- u32 idx;
-
- for (idx = 0; idx < UX500_MUSB_DMA_NUM_RX_TX_CHANNELS; idx++)
- musb_dma_rx_ch[idx].dev_type = dev_type[idx];
-}
-
-static inline void ux500_usb_dma_update_tx_ch_config(int *dev_type)
-{
- u32 idx;
-
- for (idx = 0; idx < UX500_MUSB_DMA_NUM_RX_TX_CHANNELS; idx++)
- musb_dma_tx_ch[idx].dev_type = dev_type[idx];
-}
-
-void ux500_add_usb(struct device *parent, resource_size_t base, int irq,
- int *dma_rx_cfg, int *dma_tx_cfg)
-{
- ux500_musb_device.resource[0].start = base;
- ux500_musb_device.resource[0].end = base + SZ_64K - 1;
- ux500_musb_device.resource[1].start = irq;
- ux500_musb_device.resource[1].end = irq;
-
- ux500_usb_dma_update_rx_ch_config(dma_rx_cfg);
- ux500_usb_dma_update_tx_ch_config(dma_tx_cfg);
-
- ux500_musb_device.dev.parent = parent;
-
- platform_device_register(&ux500_musb_device);
-}
--
1.8.1.2
next prev parent reply other threads:[~2013-08-23 12:24 UTC|newest]
Thread overview: 49+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-08-23 12:23 [PATCH 0/40] ARM: ux500: Convert to Device Tree only platform Lee Jones
2013-08-23 12:23 ` [PATCH 01/40] ARM: ux500: Remove Audio/MSP support when booting with ATAGs Lee Jones
2013-08-23 12:23 ` [PATCH 02/40] ARM: ux500: Remove TPS61052 High Power White LED Driver ATAG support Lee Jones
2013-08-23 12:23 ` [PATCH 03/40] ARM: ux500: Remove ATAG support for LP5521 Programmable Three-Channel LED driver Lee Jones
2013-08-23 12:23 ` [PATCH 04/40] ARM: ux500: Remove ATAG booting support for Snowball's heatbeat LED Lee Jones
2013-08-23 12:23 ` [PATCH 05/40] ARM: ux500: Purge support for Snowball user buttons when booting with ATAGs Lee Jones
2013-08-23 12:23 ` [PATCH 06/40] ARM: ux500: Disable Snowball's SMSC911x Ethernet " Lee Jones
2013-08-23 12:23 ` [PATCH 07/40] ARM: ux500: Remove support for Snowball's Ethernet regulator " Lee Jones
2013-08-23 12:23 ` [PATCH 08/40] ARM: ux500: Disable Snowball's CPUFreq functionality when booting with ATAGs enabled Lee Jones
2013-08-23 12:23 ` [PATCH 09/40] ARM: ux500: Purge SDI regulator support when booting with ATAGs enable Lee Jones
2013-08-23 12:23 ` [PATCH 10/40] ARM: ux500: Deactivate Crypt support when booting with ATAGs Lee Jones
2013-08-23 12:23 ` [PATCH 11/40] ARM: ux500: Rip out Hash " Lee Jones
2013-08-23 12:23 ` [PATCH 12/40] ARM: ux500: Prevent CODEC platform data from being passed when booting ATAGs Lee Jones
2013-08-23 12:23 ` [PATCH 13/40] ARM: ux500: Stop passing GPIO pdata when booitng with ATAGs enabled Lee Jones
2013-08-23 12:23 ` [PATCH 14/40] ARM: ux500: Remove TC35892 Flexible IO Expander when booting ATAGs Lee Jones
2013-08-23 12:23 ` [PATCH 15/40] ARM: ux500: Remove Light sensor Rohm BH1780GLI when booting with ATAGs Lee Jones
2013-08-23 12:23 ` [PATCH 16/40] ARM: ux500: Purge SFH7741 Proximity Sensor support " Lee Jones
2013-08-23 12:23 ` [PATCH 17/40] ARM: ux500: Remove I2C support when booting with ATAG support Lee Jones
2013-08-23 12:23 ` [PATCH 18/40] ARM: ux500: Purge SDI support for ATAG booting Lee Jones
2013-08-23 12:23 ` [PATCH 19/40] ARM: ux500: Rip out keypad initialisation which is no longer used Lee Jones
2013-08-23 12:23 ` Lee Jones [this message]
2013-08-23 12:23 ` [PATCH 21/40] ARM: ux500: Purge support for registering the RTC when booting with ATAGs Lee Jones
2013-08-23 12:23 ` [PATCH 22/40] ARM: ux500: Stop registering Pinctrl when booting with ATAG support Lee Jones
2013-08-23 12:23 ` [PATCH 23/40] ARM: ux500: Stop enabling GPIOs when not booting with Device Tree Lee Jones
2013-08-23 12:23 ` [PATCH 24/40] ARM: ux500: Deactivate enablement of DMA40 during ATAG booting Lee Jones
2013-08-23 12:23 ` [PATCH 25/40] ARM: ux500: Do not register the PMU device if booting with ATAGs Lee Jones
2013-08-23 12:23 ` [PATCH 26/40] ARM: ux500: Rip out SSP/SPI registration when not booting with Device Tree Lee Jones
2013-08-23 12:23 ` [PATCH 27/40] ARM: ux500: Stop initialising the pinmaps when booting with ATAGs Lee Jones
2013-08-23 12:23 ` [PATCH 28/40] ARM: ux500: Remove UART support when booting without Device Tree Lee Jones
2013-08-23 12:23 ` [PATCH 29/40] ARM: ux500: Stop requesting the SoC device to play 'parent' role Lee Jones
2013-08-23 12:23 ` [PATCH 30/40] ARM: ux500: Purge DB8500 PRCMU registration when not booting with DT Lee Jones
2013-08-23 12:23 ` [PATCH 31/40] ARM: ux500: Don't register Synaptics RMI4 TS when booting with ATAGs Lee Jones
2013-08-23 12:23 ` [PATCH 32/40] ARM: ux500: Delete U8500 UIB support " Lee Jones
2013-08-23 12:53 ` Linus Walleij
2013-08-23 13:03 ` Linus Walleij
2013-08-27 7:52 ` Lee Jones
2013-08-23 12:23 ` [PATCH 33/40] ARM: ux500: Don't register the STMPE/SKE when booting with ATAG support Lee Jones
2013-08-23 12:55 ` Linus Walleij
2013-08-23 13:05 ` Linus Walleij
2013-08-23 14:50 ` Lee Jones
2013-08-23 12:23 ` [PATCH 34/40] ARM: ux500: Remove BU21013 ROHM TS support when booting with only ATAGs Lee Jones
2013-08-23 12:23 ` [PATCH 35/40] ARM: ux500: Take out STUIB support when not booting with Device Tree Lee Jones
2013-08-23 12:23 ` [PATCH 36/40] ARM: ux500: Purge UIB framework when booting with ATAGs Lee Jones
2013-08-23 12:23 ` [PATCH 37/40] ARM: ux500: Remove ATAG booting support for MOP500 Lee Jones
2013-08-23 12:23 ` [PATCH 38/40] ARM: ux500: Remove ATAG booting support for U8520 Lee Jones
2013-08-23 12:23 ` [PATCH 39/40] ARM: ux500: Remove ATAG booting support for HREF Lee Jones
2013-08-23 12:23 ` [PATCH 40/40] ARM: ux500: Remove ATAG booting support for Snowball Lee Jones
2013-08-23 13:26 ` [PATCH 0/40] ARM: ux500: Convert to Device Tree only platform Linus Walleij
2013-08-23 14:46 ` Lee Jones
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1377260620-18829-21-git-send-email-lee.jones@linaro.org \
--to=lee.jones@linaro.org \
--cc=arnd@arndb.de \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®