mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Joe Perches <joe@perches.com>
To: Jiri Kosina <trivial@kernel.org>
Cc: LKML <linux-kernel@vger.kernel.org>
Subject: [trivial PATCH] treewide: Convert retrun typos to return
Date: Tue, 03 Sep 2013 13:45:58 -0700	[thread overview]
Message-ID: <1378241158.7347.26.camel@joe-AO722> (raw)

Tyops should be fixed.

Signed-off-by: Joe Perches <joe@perches.com>
---
 drivers/net/wireless/rtlwifi/rtl8192de/dm.c | 2 +-
 drivers/scsi/bfa/bfad_im.c                  | 2 +-
 drivers/scsi/hpsa.c                         | 2 +-
 drivers/scsi/lpfc/lpfc_bsg.c                | 2 +-
 drivers/scsi/qla2xxx/qla_bsg.c              | 2 +-
 drivers/tty/serial/kgdboc.c                 | 2 +-
 6 files changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/net/wireless/rtlwifi/rtl8192de/dm.c b/drivers/net/wireless/rtlwifi/rtl8192de/dm.c
index 47875ba..f700f7a 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192de/dm.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192de/dm.c
@@ -416,7 +416,7 @@ static void rtl92d_dm_dig(struct ieee80211_hw *hw)
 
 	/* because we will send data pkt when scanning
 	 * this will cause some ap like gear-3700 wep TP
-	 * lower if we retrun here, this is the diff of
+	 * lower if we return here, this is the diff of
 	 * mac80211 driver vs ieee80211 driver */
 	/* if (rtlpriv->mac80211.act_scanning)
 	 *      return; */
diff --git a/drivers/scsi/bfa/bfad_im.c b/drivers/scsi/bfa/bfad_im.c
index 9796284..9967f9c 100644
--- a/drivers/scsi/bfa/bfad_im.c
+++ b/drivers/scsi/bfa/bfad_im.c
@@ -206,7 +206,7 @@ bfad_im_abort_handler(struct scsi_cmnd *cmnd)
 	spin_lock_irqsave(&bfad->bfad_lock, flags);
 	hal_io = (struct bfa_ioim_s *) cmnd->host_scribble;
 	if (!hal_io) {
-		/* IO has been completed, retrun success */
+		/* IO has been completed, return success */
 		rc = SUCCESS;
 		goto out;
 	}
diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
index b766f5a..fac8cf5 100644
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -1054,7 +1054,7 @@ free_and_out:
 }
 
 /*
- * Lookup bus/target/lun and retrun corresponding struct hpsa_scsi_dev_t *
+ * Lookup bus/target/lun and return corresponding struct hpsa_scsi_dev_t *
  * Assume's h->devlock is held.
  */
 static struct hpsa_scsi_dev_t *lookup_hpsa_scsi_dev(struct ctlr_info *h,
diff --git a/drivers/scsi/lpfc/lpfc_bsg.c b/drivers/scsi/lpfc/lpfc_bsg.c
index bc27063..79c13c3 100644
--- a/drivers/scsi/lpfc/lpfc_bsg.c
+++ b/drivers/scsi/lpfc/lpfc_bsg.c
@@ -2628,7 +2628,7 @@ err_get_xri_exit:
  * @phba: Pointer to HBA context object
  *
  * This function allocates BSG_MBOX_SIZE (4KB) page size dma buffer and.
- * retruns the pointer to the buffer.
+ * returns the pointer to the buffer.
  **/
 static struct lpfc_dmabuf *
 lpfc_bsg_dma_page_alloc(struct lpfc_hba *phba)
diff --git a/drivers/scsi/qla2xxx/qla_bsg.c b/drivers/scsi/qla2xxx/qla_bsg.c
index b989add..aa57bf0 100644
--- a/drivers/scsi/qla2xxx/qla_bsg.c
+++ b/drivers/scsi/qla2xxx/qla_bsg.c
@@ -1895,7 +1895,7 @@ done:
 	bsg_job->reply->reply_payload_rcv_len = 0;
 	bsg_job->reply->result = (DID_OK) << 16;
 	bsg_job->job_done(bsg_job);
-	/* Always retrun success, vendor rsp carries correct status */
+	/* Always return success, vendor rsp carries correct status */
 	return 0;
 }
 
diff --git a/drivers/tty/serial/kgdboc.c b/drivers/tty/serial/kgdboc.c
index 1002054..a260cde 100644
--- a/drivers/tty/serial/kgdboc.c
+++ b/drivers/tty/serial/kgdboc.c
@@ -45,7 +45,7 @@ static int kgdboc_reset_connect(struct input_handler *handler,
 {
 	input_reset_device(dev);
 
-	/* Retrun an error - we do not want to bind, just to reset */
+	/* Return an error - we do not want to bind, just to reset */
 	return -ENODEV;
 }
 



             reply	other threads:[~2013-09-03 20:46 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-09-03 20:45 Joe Perches [this message]
2013-09-04 10:26 ` Jiri Kosina

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1378241158.7347.26.camel@joe-AO722 \
    --to=joe@perches.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=trivial@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®