From: Michael Opdenacker <michael.opdenacker@free-electrons.com>
To: kernel@pengutronix.de, linux@arm.linux.org.uk
Cc: linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org,
Michael Opdenacker <michael.opdenacker@free-electrons.com>
Subject: [PATCH][RESEND] ARM: imx: remove IRQF_DISABLED
Date: Wed, 4 Sep 2013 07:04:39 +0200 [thread overview]
Message-ID: <1378271079-24945-1-git-send-email-michael.opdenacker@free-electrons.com> (raw)
This flag is a NOOP since 2.6.35 and can be removed.
This is an update for 3.11 of a patch already sent for 3.10
Signed-off-by: Michael Opdenacker <michael.opdenacker@free-electrons.com>
---
arch/arm/mach-imx/Kconfig | 2 +-
arch/arm/mach-imx/epit.c | 2 +-
arch/arm/mach-imx/mach-armadillo5x0.c | 3 +--
arch/arm/mach-imx/mach-mx31_3ds.c | 2 +-
arch/arm/mach-imx/mach-pcm037.c | 3 +--
arch/arm/mach-imx/mx31lilly-db.c | 3 +--
arch/arm/mach-imx/time.c | 2 +-
7 files changed, 7 insertions(+), 10 deletions(-)
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index f546560..799a92f 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -22,7 +22,7 @@ config MXC_IRQ_PRIOR
help
Select this if you want to use prioritized IRQ handling.
This feature prevents higher priority ISR to be interrupted
- by lower priority IRQ even IRQF_DISABLED flag is not set.
+ by lower priority IRQ.
This may be useful in embedded applications, where are strong
requirements for timing.
Say N here, unless you have a specialized requirement.
diff --git a/arch/arm/mach-imx/epit.c b/arch/arm/mach-imx/epit.c
index e02de18..074b1a8 100644
--- a/arch/arm/mach-imx/epit.c
+++ b/arch/arm/mach-imx/epit.c
@@ -171,7 +171,7 @@ static irqreturn_t epit_timer_interrupt(int irq, void *dev_id)
static struct irqaction epit_timer_irq = {
.name = "i.MX EPIT Timer Tick",
- .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+ .flags = IRQF_TIMER | IRQF_IRQPOLL,
.handler = epit_timer_interrupt,
};
diff --git a/arch/arm/mach-imx/mach-armadillo5x0.c b/arch/arm/mach-imx/mach-armadillo5x0.c
index 368a6e3..58b864a 100644
--- a/arch/arm/mach-imx/mach-armadillo5x0.c
+++ b/arch/arm/mach-imx/mach-armadillo5x0.c
@@ -404,8 +404,7 @@ static int armadillo5x0_sdhc1_init(struct device *dev,
/* When supported the trigger type have to be BOTH */
ret = request_irq(gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_ATA_DMACK)),
- detect_irq,
- IRQF_DISABLED | IRQF_TRIGGER_FALLING,
+ detect_irq, IRQF_TRIGGER_FALLING,
"sdhc-detect", data);
if (ret)
diff --git a/arch/arm/mach-imx/mach-mx31_3ds.c b/arch/arm/mach-imx/mach-mx31_3ds.c
index 1ed9161..50044a2 100644
--- a/arch/arm/mach-imx/mach-mx31_3ds.c
+++ b/arch/arm/mach-imx/mach-mx31_3ds.c
@@ -311,7 +311,7 @@ static int mx31_3ds_sdhc1_init(struct device *dev,
}
ret = request_irq(gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1)),
- detect_irq, IRQF_DISABLED |
+ detect_irq,
IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
"sdhc1-detect", data);
if (ret) {
diff --git a/arch/arm/mach-imx/mach-pcm037.c b/arch/arm/mach-imx/mach-pcm037.c
index bc0261e..45303bd6 100644
--- a/arch/arm/mach-imx/mach-pcm037.c
+++ b/arch/arm/mach-imx/mach-pcm037.c
@@ -371,8 +371,7 @@ static int pcm970_sdhc1_init(struct device *dev, irq_handler_t detect_irq,
#endif
ret = request_irq(gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_SCK6)), detect_irq,
- IRQF_DISABLED | IRQF_TRIGGER_FALLING,
- "sdhc-detect", data);
+ IRQF_TRIGGER_FALLING, "sdhc-detect", data);
if (ret)
goto err_gpio_free_2;
diff --git a/arch/arm/mach-imx/mx31lilly-db.c b/arch/arm/mach-imx/mx31lilly-db.c
index d4361b8..649fe49 100644
--- a/arch/arm/mach-imx/mx31lilly-db.c
+++ b/arch/arm/mach-imx/mx31lilly-db.c
@@ -130,8 +130,7 @@ static int mxc_mmc1_init(struct device *dev,
gpio_direction_input(gpio_wp);
ret = request_irq(gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_1)),
- detect_irq,
- IRQF_DISABLED | IRQF_TRIGGER_FALLING,
+ detect_irq, IRQF_TRIGGER_FALLING,
"MMC detect", data);
if (ret)
goto exit_free_wp;
diff --git a/arch/arm/mach-imx/time.c b/arch/arm/mach-imx/time.c
index cd46529..9b6638a 100644
--- a/arch/arm/mach-imx/time.c
+++ b/arch/arm/mach-imx/time.c
@@ -250,7 +250,7 @@ static irqreturn_t mxc_timer_interrupt(int irq, void *dev_id)
static struct irqaction mxc_timer_irq = {
.name = "i.MX Timer Tick",
- .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+ .flags = IRQF_TIMER | IRQF_IRQPOLL,
.handler = mxc_timer_interrupt,
};
--
1.8.1.2
next reply other threads:[~2013-09-04 5:04 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-09-04 5:04 Michael Opdenacker [this message]
2013-09-10 6:58 ` Sascha Hauer
2013-09-10 7:16 ` Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1378271079-24945-1-git-send-email-michael.opdenacker@free-electrons.com \
--to=michael.opdenacker@free-electrons.com \
--cc=kernel@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@arm.linux.org.uk \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®