mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Sachin Kamat <sachin.kamat@linaro.org>
To: linux-kernel@vger.kernel.org
Cc: broonie@kernel.org, sachin.kamat@linaro.org,
	kyungmin.park@samsung.com, myungjoo.ham@samsung.com,
	ldewangan@nvidia.com, jack.yoo@maxim-ic.com,
	haojian.zhuang@marvell.com, jonghwa3.lee@samsung.com
Subject: [PATCH 9/9] regulator: max8998: Use devm_regulator_register
Date: Wed,  4 Sep 2013 11:08:02 +0530	[thread overview]
Message-ID: <1378273082-28305-9-git-send-email-sachin.kamat@linaro.org> (raw)
In-Reply-To: <1378273082-28305-1-git-send-email-sachin.kamat@linaro.org>

devm_* simplifies the code.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
---
 drivers/regulator/max8998.c |   35 ++++++++---------------------------
 1 file changed, 8 insertions(+), 27 deletions(-)

diff --git a/drivers/regulator/max8998.c b/drivers/regulator/max8998.c
index a4c53b2..ae3f065 100644
--- a/drivers/regulator/max8998.c
+++ b/drivers/regulator/max8998.c
@@ -790,16 +790,14 @@ static int max8998_pmic_probe(struct platform_device *pdev)
 			dev_err(&pdev->dev,
 				"MAX8998 SET1 GPIO defined as 0 !\n");
 			WARN_ON(!pdata->buck1_set1);
-			ret = -EIO;
-			goto err_out;
+			return -EIO;
 		}
 		/* Check if SET2 is not equal to 0 */
 		if (!pdata->buck1_set2) {
 			dev_err(&pdev->dev,
 				"MAX8998 SET2 GPIO defined as 0 !\n");
 			WARN_ON(!pdata->buck1_set2);
-			ret = -EIO;
-			goto err_out;
+			return -EIO;
 		}
 
 		gpio_request(pdata->buck1_set1, "MAX8998 BUCK1_SET1");
@@ -823,7 +821,7 @@ static int max8998_pmic_probe(struct platform_device *pdev)
 			ret = max8998_write_reg(i2c,
 					MAX8998_REG_BUCK1_VOLTAGE1 + v, i);
 			if (ret)
-				goto err_out;
+				return ret;
 		}
 	}
 
@@ -833,8 +831,7 @@ static int max8998_pmic_probe(struct platform_device *pdev)
 			dev_err(&pdev->dev,
 				"MAX8998 SET3 GPIO defined as 0 !\n");
 			WARN_ON(!pdata->buck2_set3);
-			ret = -EIO;
-			goto err_out;
+			return -EIO;
 		}
 		gpio_request(pdata->buck2_set3, "MAX8998 BUCK2_SET3");
 		gpio_direction_output(pdata->buck2_set3,
@@ -852,7 +849,7 @@ static int max8998_pmic_probe(struct platform_device *pdev)
 			ret = max8998_write_reg(i2c,
 					MAX8998_REG_BUCK2_VOLTAGE1 + v, i);
 			if (ret)
-				goto err_out;
+				return ret;
 		}
 	}
 
@@ -875,34 +872,19 @@ static int max8998_pmic_probe(struct platform_device *pdev)
 		config.init_data = pdata->regulators[i].initdata;
 		config.driver_data = max8998;
 
-		rdev[i] = regulator_register(&regulators[index], &config);
+		rdev[i] = devm_regulator_register(&pdev->dev,
+						  &regulators[index], &config);
 		if (IS_ERR(rdev[i])) {
 			ret = PTR_ERR(rdev[i]);
 			dev_err(max8998->dev, "regulator %s init failed (%d)\n",
 						regulators[index].name, ret);
 			rdev[i] = NULL;
-			goto err;
+			return ret;
 		}
 	}
 
 
 	return 0;
-err:
-	while (--i >= 0)
-		regulator_unregister(rdev[i]);
-err_out:
-	return ret;
-}
-
-static int max8998_pmic_remove(struct platform_device *pdev)
-{
-	struct max8998_data *max8998 = platform_get_drvdata(pdev);
-	struct regulator_dev **rdev = max8998->rdev;
-	int i;
-
-	for (i = 0; i < max8998->num_regulators; i++)
-		regulator_unregister(rdev[i]);
-	return 0;
 }
 
 static const struct platform_device_id max8998_pmic_id[] = {
@@ -918,7 +900,6 @@ static struct platform_driver max8998_pmic_driver = {
 		.owner = THIS_MODULE,
 	},
 	.probe = max8998_pmic_probe,
-	.remove = max8998_pmic_remove,
 	.id_table = max8998_pmic_id,
 };
 
-- 
1.7.9.5


  parent reply	other threads:[~2013-09-04  5:56 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-09-04  5:37 [PATCH 1/9] regulator: max77686: " Sachin Kamat
2013-09-04  5:37 ` [PATCH 2/9] regulator: max1586: " Sachin Kamat
2013-09-04  5:37 ` [PATCH 3/9] regulator: max77693: " Sachin Kamat
2013-09-04  5:37 ` [PATCH 4/9] regulator: max8649: " Sachin Kamat
2013-09-04  5:37 ` [PATCH 5/9] regulator: max8660: " Sachin Kamat
2013-09-04  5:37 ` [PATCH 6/9] regulator: max8907-regulator: " Sachin Kamat
2013-09-04  5:38 ` [PATCH 7/9] regulator: max8973-regulator: " Sachin Kamat
2013-09-04  5:38 ` [PATCH 8/9] regulator: max8997: " Sachin Kamat
2013-09-04  5:38 ` Sachin Kamat [this message]
2013-09-04  9:52 ` [PATCH 1/9] regulator: max77686: " Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1378273082-28305-9-git-send-email-sachin.kamat@linaro.org \
    --to=sachin.kamat@linaro.org \
    --cc=broonie@kernel.org \
    --cc=haojian.zhuang@marvell.com \
    --cc=jack.yoo@maxim-ic.com \
    --cc=jonghwa3.lee@samsung.com \
    --cc=kyungmin.park@samsung.com \
    --cc=ldewangan@nvidia.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=myungjoo.ham@samsung.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®