From: Andrew Bresticker <abrestic@chromium.org>
To: linux-samsung-soc@vger.kernel.org
Cc: Rob Herring <rob.herring@calxeda.com>,
Pawel Moll <pawel.moll@arm.com>,
Mark Rutland <mark.rutland@arm.com>,
Stephen Warren <swarren@wwwdotorg.org>,
Ian Campbell <ijc+devicetree@hellion.org.uk>,
Rob Landley <rob@landley.net>, Kukjin Kim <kgene.kim@samsung.com>,
Russell King <linux@arm.linux.org.uk>,
Mike Turquette <mturquette@linaro.org>,
Grant Likely <grant.likely@linaro.org>,
Sachin Kamat <sachin.kamat@linaro.org>,
Jiri Kosina <jkosina@suse.cz>,
Rahul Sharma <rahul.sharma@samsung.com>,
Leela Krishna Amudala <l.krishna@samsung.com>,
Stephen Boyd <sboyd@codeaurora.org>,
Tomasz Figa <t.figa@samsung.com>,
Tushar Behera <tushar.behera@linaro.org>,
Yadwinder Singh Brar <yadi.brar@samsung.com>,
Doug Anderson <dianders@chromium.org>,
Padmavathi Venna <padma.v@samsung.com>,
devicetree@vger.kernel.org, linux-doc@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org,
Andrew Bresticker <abrestic@chromium.org>
Subject: [PATCH 5/6] clk: exynos-audss: add support for Exynos 5420
Date: Fri, 20 Sep 2013 14:13:56 -0700 [thread overview]
Message-ID: <1379711637-5226-5-git-send-email-abrestic@chromium.org> (raw)
In-Reply-To: <1379711637-5226-1-git-send-email-abrestic@chromium.org>
The AudioSS block on Exynos 5420 has an additional clock gate for the
ADMA bus clock.
Signed-off-by: Andrew Bresticker <abrestic@chromium.org>
---
Documentation/devicetree/bindings/clock/clk-exynos-audss.txt | 7 +++++--
drivers/clk/samsung/clk-exynos-audss.c | 8 ++++++++
include/dt-bindings/clk/exynos-audss-clk.h | 3 ++-
3 files changed, 15 insertions(+), 3 deletions(-)
diff --git a/Documentation/devicetree/bindings/clock/clk-exynos-audss.txt b/Documentation/devicetree/bindings/clock/clk-exynos-audss.txt
index d51a2f9..a10c648 100644
--- a/Documentation/devicetree/bindings/clock/clk-exynos-audss.txt
+++ b/Documentation/devicetree/bindings/clock/clk-exynos-audss.txt
@@ -8,8 +8,10 @@ Required Properties:
- compatible: should be one of the following:
- "samsung,exynos4210-audss-clock" - controller compatible with all Exynos4 SoCs.
- - "samsung,exynos5250-audss-clock" - controller compatible with all Exynos5 SoCs.
-
+ - "samsung,exynos5250-audss-clock" - controller compatible with Exynos5250
+ SoCs.
+ - "samsung,exynos5420-audss-clock" - controller compatible with Exynos5420
+ SoCs.
- reg: physical base address and length of the controller's register set.
- #clock-cells: should be 1.
@@ -51,6 +53,7 @@ i2s_bus 6
sclk_i2s 7
pcm_bus 8
sclk_pcm 9
+adma 10 Exynos5420
Example 1: An example of a clock controller node using the default input
clock names is listed below.
diff --git a/drivers/clk/samsung/clk-exynos-audss.c b/drivers/clk/samsung/clk-exynos-audss.c
index aac5342..07c8dbd 100644
--- a/drivers/clk/samsung/clk-exynos-audss.c
+++ b/drivers/clk/samsung/clk-exynos-audss.c
@@ -145,6 +145,13 @@ static int exynos_audss_clk_probe(struct platform_device *pdev)
sclk_pcm_p, CLK_SET_RATE_PARENT,
reg_base + ASS_CLK_GATE, 5, 0, &lock);
+ if (of_device_is_compatible(pdev->dev.of_node,
+ "samsung,exynos5420-audss-clock")) {
+ clk_table[EXYNOS_ADMA] = clk_register_gate(NULL, "adma",
+ "dout_srp", CLK_SET_RATE_PARENT,
+ reg_base + ASS_CLK_GATE, 9, 0, &lock);
+ }
+
#ifdef CONFIG_PM_SLEEP
register_syscore_ops(&exynos_audss_clk_syscore_ops);
#endif
@@ -164,6 +171,7 @@ static int exynos_audss_clk_remove(struct platform_device *pdev)
static const struct of_device_id exynos_audss_clk_of_match[] = {
{ .compatible = "samsung,exynos4210-audss-clock", },
{ .compatible = "samsung,exynos5250-audss-clock", },
+ { .compatible = "samsung,exynos5420-audss-clock", },
{},
};
diff --git a/include/dt-bindings/clk/exynos-audss-clk.h b/include/dt-bindings/clk/exynos-audss-clk.h
index 8279f42..0ae6f5a 100644
--- a/include/dt-bindings/clk/exynos-audss-clk.h
+++ b/include/dt-bindings/clk/exynos-audss-clk.h
@@ -19,7 +19,8 @@
#define EXYNOS_SCLK_I2S 7
#define EXYNOS_PCM_BUS 8
#define EXYNOS_SCLK_PCM 9
+#define EXYNOS_ADMA 10
-#define EXYNOS_AUDSS_MAX_CLKS 10
+#define EXYNOS_AUDSS_MAX_CLKS 11
#endif
--
1.8.4
next prev parent reply other threads:[~2013-09-20 21:20 UTC|newest]
Thread overview: 40+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-09-20 21:13 [PATCH 1/6] clk: exynos-audss: convert to platform device Andrew Bresticker
2013-09-20 21:13 ` [PATCH 2/6] clk: exynos-audss: allow input clocks to be specified in device tree Andrew Bresticker
2013-09-21 15:12 ` Tomasz Figa
2013-09-20 21:13 ` [PATCH 3/6] clk: exynos5250: add clock ID for div_pcm0 Andrew Bresticker
2013-09-21 15:19 ` Tomasz Figa
2013-09-20 21:13 ` [PATCH 4/6] ARM: dts: exynos5250: add sclk_pcm_in to audss clock controller Andrew Bresticker
2013-09-21 15:13 ` Tomasz Figa
2013-09-20 21:13 ` Andrew Bresticker [this message]
2013-09-21 15:17 ` [PATCH 5/6] clk: exynos-audss: add support for Exynos 5420 Tomasz Figa
2013-09-20 21:13 ` [PATCH 6/6] ARM: dts: exynos5420: add sclk_pcm_in to audss clock controller Andrew Bresticker
2013-09-21 15:18 ` Tomasz Figa
2013-09-21 12:50 ` [PATCH 1/6] clk: exynos-audss: convert to platform device Tomasz Figa
[not found] ` <CAL1qeaGjUTrfDaAr1rgsgDaZscjaV7tqi3Jd_-zo2sMtCCFSAQ@mail.gmail.com>
2013-09-23 22:50 ` Sylwester Nawrocki
2013-09-24 0:21 ` [PATCH V2 " Andrew Bresticker
2013-09-24 0:21 ` [PATCH V2 2/6] clk: exynos-audss: allow input clocks to be specified in device tree Andrew Bresticker
2013-09-24 0:21 ` [PATCH V2 3/6] clk: exynos5250: add clock ID for div_pcm0 Andrew Bresticker
2013-09-24 0:21 ` [PATCH V2 4/6] ARM: dts: exynos5250: add input clocks to audss clock controller Andrew Bresticker
2013-09-24 0:21 ` [PATCH V2 5/6] clk: exynos-audss: add support for Exynos 5420 Andrew Bresticker
2013-09-24 0:21 ` [PATCH V2 6/6] ARM: dts: exynos5420: add input clocks to audss clock controller Andrew Bresticker
2013-09-24 9:20 ` [PATCH V2 1/6] clk: exynos-audss: convert to platform device Tomasz Figa
2013-09-24 9:35 ` Sylwester Nawrocki
2013-09-24 18:06 ` [PATCH V3 " Andrew Bresticker
2013-09-24 18:06 ` [PATCH V3 2/6] clk: exynos-audss: allow input clocks to be specified in device tree Andrew Bresticker
2013-09-24 18:06 ` [PATCH V3 3/6] clk: exynos5250: add clock ID for div_pcm0 Andrew Bresticker
2013-09-24 18:06 ` [PATCH V3 4/6] ARM: dts: exynos5250: add input clocks to audss clock controller Andrew Bresticker
2013-09-24 18:06 ` [PATCH V3 5/6] clk: exynos-audss: add support for Exynos 5420 Andrew Bresticker
2013-09-24 18:06 ` [PATCH V3 6/6] ARM: dts: exynos5420: add input clocks to audss clock controller Andrew Bresticker
2013-09-24 19:17 ` [PATCH V3 1/6] clk: exynos-audss: convert to platform device Tomasz Figa
2013-09-24 21:15 ` Sylwester Nawrocki
2013-09-24 22:12 ` Andrew Bresticker
2013-09-24 22:16 ` Stephen Boyd
2013-09-25 21:12 ` [PATCH V4 " Andrew Bresticker
2013-09-25 21:12 ` [PATCH V4 2/6] clk: exynos-audss: allow input clocks to be specified in device tree Andrew Bresticker
2013-09-25 21:12 ` [PATCH V4 3/6] clk: exynos5250: add clock ID for div_pcm0 Andrew Bresticker
2013-09-25 21:12 ` [PATCH V4 4/6] ARM: dts: exynos5250: add input clocks to audss clock controller Andrew Bresticker
2013-09-25 21:12 ` [PATCH V4 5/6] clk: exynos-audss: add support for Exynos 5420 Andrew Bresticker
2013-09-25 21:12 ` [PATCH V4 6/6] ARM: dts: exynos5420: add input clocks to audss clock controller Andrew Bresticker
2013-10-08 16:53 ` [PATCH V4 1/6] clk: exynos-audss: convert to platform device Andrew Bresticker
2013-11-27 18:40 ` Mike Turquette
[not found] ` <20131127184145.16819.44300@quantum>
[not found] ` <529BBB9E.40300@samsung.com>
[not found] ` <1592382.OOUUI06mrc@amdc1227>
2014-01-04 2:47 ` kgene
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1379711637-5226-5-git-send-email-abrestic@chromium.org \
--to=abrestic@chromium.org \
--cc=devicetree@vger.kernel.org \
--cc=dianders@chromium.org \
--cc=grant.likely@linaro.org \
--cc=ijc+devicetree@hellion.org.uk \
--cc=jkosina@suse.cz \
--cc=kgene.kim@samsung.com \
--cc=l.krishna@samsung.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-doc@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=linux@arm.linux.org.uk \
--cc=mark.rutland@arm.com \
--cc=mturquette@linaro.org \
--cc=padma.v@samsung.com \
--cc=pawel.moll@arm.com \
--cc=rahul.sharma@samsung.com \
--cc=rob.herring@calxeda.com \
--cc=rob@landley.net \
--cc=sachin.kamat@linaro.org \
--cc=sboyd@codeaurora.org \
--cc=swarren@wwwdotorg.org \
--cc=t.figa@samsung.com \
--cc=tushar.behera@linaro.org \
--cc=yadi.brar@samsung.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®