From: Roger Quadros <rogerq@ti.com>
To: <balbi@ti.com>, <bcousson@baylibre.com>, <tony@atomide.com>
Cc: <p.zabel@pengutronix.de>, <broonie@kernel.org>,
<linux-omap@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-usb@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<devicetree@vger.kernel.org>, Roger Quadros <rogerq@ti.com>
Subject: [PATCH v3 08/10] ARM: dts: omap3-beagle: Make USB host pin naming consistent
Date: Tue, 24 Sep 2013 11:53:54 +0300 [thread overview]
Message-ID: <1380012836-29900-9-git-send-email-rogerq@ti.com> (raw)
In-Reply-To: <1380012836-29900-1-git-send-email-rogerq@ti.com>
Use a common naming scheme "mode0name.modename flags" for the
USB host pins to be consistent.
Signed-off-by: Roger Quadros <rogerq@ti.com>
---
arch/arm/boot/dts/omap3-beagle.dts | 24 ++++++++++++------------
1 files changed, 12 insertions(+), 12 deletions(-)
diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts
index 71bde47..1237822 100644
--- a/arch/arm/boot/dts/omap3-beagle.dts
+++ b/arch/arm/boot/dts/omap3-beagle.dts
@@ -90,18 +90,18 @@
hsusbb2_pins: pinmux_hsusbb2_pins {
pinctrl-single,pins = <
- 0x5c0 (PIN_OUTPUT | MUX_MODE3) /* usbb2_ulpitll_clk.usbb1_ulpiphy_clk */
- 0x5c2 (PIN_OUTPUT | MUX_MODE3) /* usbb2_ulpitll_clk.usbb1_ulpiphy_stp */
- 0x5c4 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* usbb2_ulpitll_clk.usbb1_ulpiphy_dir */
- 0x5c6 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* usbb2_ulpitll_clk.usbb1_ulpiphy_nxt */
- 0x5c8 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* usbb2_ulpitll_clk.usbb1_ulpiphy_dat0 */
- 0x5cA (PIN_INPUT_PULLDOWN | MUX_MODE3) /* usbb2_ulpitll_clk.usbb1_ulpiphy_dat1 */
- 0x1a4 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* usbb2_ulpitll_clk.usbb1_ulpiphy_dat2 */
- 0x1a6 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* usbb2_ulpitll_clk.usbb1_ulpiphy_dat3 */
- 0x1a8 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* usbb2_ulpitll_clk.usbb1_ulpiphy_dat4 */
- 0x1aa (PIN_INPUT_PULLDOWN | MUX_MODE3) /* usbb2_ulpitll_clk.usbb1_ulpiphy_dat5 */
- 0x1ac (PIN_INPUT_PULLDOWN | MUX_MODE3) /* usbb2_ulpitll_clk.usbb1_ulpiphy_dat6 */
- 0x1ae (PIN_INPUT_PULLDOWN | MUX_MODE3) /* usbb2_ulpitll_clk.usbb1_ulpiphy_dat7 */
+ 0x5c0 (PIN_OUTPUT | MUX_MODE3) /* etk_d10.hsusb2_clk */
+ 0x5c2 (PIN_OUTPUT | MUX_MODE3) /* etk_d11.hsusb2_stp */
+ 0x5c4 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d12.hsusb2_dir */
+ 0x5c6 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d13.hsusb2_nxt */
+ 0x5c8 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d14.hsusb2_data0 */
+ 0x5cA (PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d15.hsusb2_data1 */
+ 0x1a4 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi1_cs3.hsusb2_data2 */
+ 0x1a6 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_clk.hsusb2_data7 */
+ 0x1a8 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_simo.hsusb2_data4 */
+ 0x1aa (PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_somi.hsusb2_data5 */
+ 0x1ac (PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_cs0.hsusb2_data6 */
+ 0x1ae (PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_cs1.hsusb2_data3 */
>;
};
--
1.7.4.1
next prev parent reply other threads:[~2013-09-24 8:55 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-09-24 8:53 [PATCH v3 00/10] USB: phy: phy-nop: Manage RESET GPIO in the driver Roger Quadros
2013-09-24 8:53 ` [PATCH v3 01/10] usb: phy: generic: Add gpio_reset to platform data Roger Quadros
2013-09-24 8:53 ` [PATCH v3 02/10] usb: phy: generic: Don't use regulator framework for RESET line Roger Quadros
2013-09-24 8:53 ` [PATCH v3 03/10] ARM: OMAP2+: omap-usb-host: Get rid of platform_data from struct usbhs_phy_data Roger Quadros
2013-10-02 10:19 ` Roger Quadros
2013-10-03 4:03 ` Tony Lindgren
2013-09-24 8:53 ` [PATCH v3 04/10] ARM: OMAP2+: usb-host: Adapt to USB phy-nop RESET line changes Roger Quadros
2013-10-02 10:20 ` Roger Quadros
2013-10-03 4:03 ` Tony Lindgren
2013-09-24 8:53 ` [PATCH v3 05/10] ARM: dts: omap3-beagle: Use reset-gpios for hsusb2_reset Roger Quadros
2013-10-03 10:34 ` Roger Quadros
2013-10-03 12:05 ` Benoit Cousson
2013-10-03 13:44 ` Benoit Cousson
2013-10-03 13:58 ` Roger Quadros
2013-10-03 14:25 ` Benoit Cousson
2013-09-24 8:53 ` [PATCH v3 06/10] ARM: dts: omap4-panda: Use reset-gpios for hsusb1_reset Roger Quadros
2013-09-24 8:53 ` [PATCH v3 07/10] ARM: dts: omap5-uevm: Use reset-gpios for hsusb2/3_reset Roger Quadros
2013-09-24 8:53 ` Roger Quadros [this message]
2013-09-24 8:53 ` [PATCH v3 09/10] ARM: dts: omap3-beagle-xm: Add USB Host support Roger Quadros
2013-11-19 21:05 ` Nishanth Menon
2013-11-20 10:32 ` Roger Quadros
2013-11-26 21:04 ` Tony Lindgren
2013-11-26 22:15 ` Nishanth Menon
2013-09-24 8:53 ` [PATCH v3 10/10] ARM: dts: omap3-beagle: Add USB OTG PHY details Roger Quadros
2013-10-03 10:32 ` [PATCH v3 00/10] USB: phy: phy-nop: Manage RESET GPIO in the driver Roger Quadros
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1380012836-29900-9-git-send-email-rogerq@ti.com \
--to=rogerq@ti.com \
--cc=balbi@ti.com \
--cc=bcousson@baylibre.com \
--cc=broonie@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=p.zabel@pengutronix.de \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®