[PATCH v1 0/2] perf,x86: add Intel RAPL PMU support

[Stephane Eranian <eranian@google.com>]

This patch adds a new uncore PMU to expose the Intel
RAPL energy consumption counters. Up to 3 counters,
each counting a particular RAPL event are exposed.

The RAPL counters are available on Intel SandyBridge,
IvyBridge, Haswell. The server skus add a 3rd counter.

The following events are available nd exposed in sysfs:
- rapl-energy-cores: power consumption of all cores on socket
- rapl-energy-pkg: power consumption of all cores + LLc cache
- rapl-energy-dram: power consumption of DRAM

The RAPL PMU is uncore by nature and is implemented such
that it only works in system-wide mode. Measuring only
one CPU per socket is sufficient. The /sys/devices/rapl/cpumask
is exported and can be used by tools to figure out which CPU
to monitor by default. For instance, on a 2-socket system, 2 CPUs
(one on each socket) will be shown.

The counters all count in the same unit. The perf_events API
exposes all RAPL counters as 64-bit integers counting in unit
of 1/2^32 Joules (or 0.23 nJ). User level tools must convert
the counts by multiplying them by 0.23 and divide 10^9 to
obtain Joules.  The reason for this is that the kernel avoids
doing floating point math whenever possible because it is
expensive (user floating-point state must be saved). The method
used avoids kernel floating-point and minimizes the loss of
precision (bits). Thanks to PeterZ for suggesting this approach.

To convert the raw count in Watt: W = C * 0.23 / (1e9 * time)

RAPL PMU is a new standalone PMU which registers with the
perf_event core subsystem. The PMU type (attr->type) is
dynamically allocated and is available from /sys/device/rapl/type.

Sampling is not supported by the RAPL PMU. There is no
privilege level filtering either.

The PMU exports a cpumask in /sys/devices/uncore/cpumask. It
is used by perf to ensure only one instance of each RAPL event
is measured per processor socket. Hotplug CPU is also supported.

We artificially limit the number of simultaneous RAPL events
to a max of 1 instance of each (so up to 3). That helps track
events and is sufficient given that RAPL events do not support
any filters, i.e., no gain in measuring the same event twice
in an event group.

The second patch adds a hrtimer to poll the counters given that
they do no interrupt on overflow. Hardware counters are 32-bit
wide.

Supported CPUs: SandyBridge, IvyBridge, Haswell.

$ perf stat -a -e rapl/rapl-energy-cores/,rapl/rapl-energy-pkg/ -I 1000 sleep 10
            time             counts events
     1.000345931        772 278 493 rapl/rapl-energy-cores/
     1.000345931     55 539 138 560 rapl/rapl-energy-pkg/    
     2.000836387        771 751 936 rapl/rapl-energy-cores/  
     2.000836387     55 326 015 488 rapl/rapl-energy-pkg/

Stephane Eranian (2):
  perf,x86: add Intel RAPL PMU support
  perf,x86: add RAPL hrtimer support

 arch/x86/kernel/cpu/Makefile                |    2 +-
 arch/x86/kernel/cpu/perf_event_intel_rapl.c |  649 +++++++++++++++++++++++++++
 tools/perf/util/evsel.c                     |    1 -
 3 files changed, 650 insertions(+), 2 deletions(-)
 create mode 100644 arch/x86/kernel/cpu/perf_event_intel_rapl.c

-- 
1.7.9.5