From: "Ivan T. Ivanov" <iivanov@mm-sol.com>
To: balbi@ti.com
Cc: rob.herring@calxeda.com, pawel.moll@arm.com,
mark.rutland@arm.com, swarren@wwwdotorg.org,
ijc+devicetree@hellion.org.uk, rob@landley.net,
davidb@codeaurora.org, dwalker@fifo99.com, bryanh@codeaurora.org,
linux@arm.linux.org.uk, gregkh@linuxfoundation.org,
grant.likely@linaro.org, jackp@codeaurora.org,
mgautam@codeaurora.org, dsegal@codeaurora.org,
linux-usb@vger.kernel.org, devicetree@vger.kernel.org,
linux-doc@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-msm@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
"Ivan T. Ivanov" <iivanov@mm-sol.com>
Subject: [PATCH v3 05/13] usb: phy: msm: Fix WARNING: quoted string split across lines
Date: Mon, 14 Oct 2013 18:24:32 +0300 [thread overview]
Message-ID: <1381764280-28420-6-git-send-email-iivanov@mm-sol.com> (raw)
In-Reply-To: <1381764280-28420-1-git-send-email-iivanov@mm-sol.com>
From: "Ivan T. Ivanov" <iivanov@mm-sol.com>
This fixes checkpatch.pl warnings.
Signed-off-by: Ivan T. Ivanov <iivanov@mm-sol.com>
---
drivers/usb/phy/phy-msm-usb.c | 33 +++++++++++----------------------
1 file changed, 11 insertions(+), 22 deletions(-)
diff --git a/drivers/usb/phy/phy-msm-usb.c b/drivers/usb/phy/phy-msm-usb.c
index b77441b..28cab03 100644
--- a/drivers/usb/phy/phy-msm-usb.c
+++ b/drivers/usb/phy/phy-msm-usb.c
@@ -67,8 +67,7 @@ static int msm_hsusb_init_vddcx(struct msm_otg *motg, int init)
USB_PHY_VDD_DIG_VOL_MIN,
USB_PHY_VDD_DIG_VOL_MAX);
if (ret) {
- dev_err(motg->phy.dev, "unable to set the voltage "
- "for hsusb vddcx\n");
+ dev_err(motg->phy.dev, "Cannot set vddcx voltage\n");
return ret;
}
@@ -79,8 +78,7 @@ static int msm_hsusb_init_vddcx(struct msm_otg *motg, int init)
ret = regulator_set_voltage(motg->vddcx, 0,
USB_PHY_VDD_DIG_VOL_MAX);
if (ret)
- dev_err(motg->phy.dev, "unable to set the voltage "
- "for hsusb vddcx\n");
+ dev_err(motg->phy.dev, "Cannot set vddcx voltage\n");
ret = regulator_disable(motg->vddcx);
if (ret)
dev_err(motg->phy.dev, "unable to disable hsusb vddcx\n");
@@ -97,8 +95,7 @@ static int msm_hsusb_ldo_init(struct msm_otg *motg, int init)
rc = regulator_set_voltage(motg->v3p3, USB_PHY_3P3_VOL_MIN,
USB_PHY_3P3_VOL_MAX);
if (rc) {
- dev_err(motg->phy.dev, "unable to set voltage level "
- "for hsusb 3p3\n");
+ dev_err(motg->phy.dev, "Cannot set v3p3 voltage\n");
goto exit;
}
rc = regulator_enable(motg->v3p3);
@@ -109,8 +106,7 @@ static int msm_hsusb_ldo_init(struct msm_otg *motg, int init)
rc = regulator_set_voltage(motg->v1p8, USB_PHY_1P8_VOL_MIN,
USB_PHY_1P8_VOL_MAX);
if (rc) {
- dev_err(motg->phy.dev, "unable to set voltage level "
- "for hsusb 1p8\n");
+ dev_err(motg->phy.dev, "Cannot set v1p8 voltage\n");
goto disable_3p3;
}
rc = regulator_enable(motg->v1p8);
@@ -144,8 +140,7 @@ static int msm_hsusb_config_vddcx(struct msm_otg *motg, int high)
ret = regulator_set_voltage(motg->vddcx, min_vol, max_vol);
if (ret) {
- pr_err("%s: unable to set the voltage for regulator "
- "HSUSB_VDDCX\n", __func__);
+ dev_err(motg->phy.dev, "Cannot set vddcx voltage\n");
return ret;
}
@@ -163,15 +158,13 @@ static int msm_hsusb_ldo_set_mode(struct msm_otg *motg, int on)
ret = regulator_set_optimum_mode(motg->v1p8,
USB_PHY_1P8_HPM_LOAD);
if (ret < 0) {
- pr_err("%s: Unable to set HPM of the regulator "
- "HSUSB_1p8\n", __func__);
+ pr_err("Could not set HPM for v1p8\n");
return ret;
}
ret = regulator_set_optimum_mode(motg->v3p3,
USB_PHY_3P3_HPM_LOAD);
if (ret < 0) {
- pr_err("%s: Unable to set HPM of the regulator "
- "HSUSB_3p3\n", __func__);
+ pr_err("Could not set HPM for v3p3\n");
regulator_set_optimum_mode(motg->v1p8,
USB_PHY_1P8_LPM_LOAD);
return ret;
@@ -180,13 +173,11 @@ static int msm_hsusb_ldo_set_mode(struct msm_otg *motg, int on)
ret = regulator_set_optimum_mode(motg->v1p8,
USB_PHY_1P8_LPM_LOAD);
if (ret < 0)
- pr_err("%s: Unable to set LPM of the regulator "
- "HSUSB_1p8\n", __func__);
+ pr_err("Could not set LPM for v1p8\n");
ret = regulator_set_optimum_mode(motg->v3p3,
USB_PHY_3P3_LPM_LOAD);
if (ret < 0)
- pr_err("%s: Unable to set LPM of the regulator "
- "HSUSB_3p3\n", __func__);
+ pr_err("Could not set LPM for v3p3\n");
}
pr_debug("reg (%s)\n", on ? "HPM" : "LPM");
@@ -546,8 +537,7 @@ static int msm_otg_resume(struct msm_otg *motg)
* PHY. USB state can not be restored. Re-insertion
* of USB cable is the only way to get USB working.
*/
- dev_err(phy->dev, "Unable to resume USB."
- "Re-plugin the cable\n");
+ dev_err(phy->dev, "Unable to resume USB. Re-plugin the cable\n");
msm_otg_reset(phy);
}
@@ -1529,8 +1519,7 @@ static int __init msm_otg_probe(struct platform_device *pdev)
motg->pdata->otg_control == OTG_USER_CONTROL) {
ret = msm_otg_debugfs_init(motg);
if (ret)
- dev_dbg(&pdev->dev, "mode debugfs file is"
- "not available\n");
+ dev_dbg(&pdev->dev, "Can not create mode change file\n");
}
pm_runtime_set_active(&pdev->dev);
--
1.7.9.5
next prev parent reply other threads:[~2013-10-14 15:29 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-10-14 15:24 [PATCH v3 00/13] usb: phy: msm: Fixes, cleanups and DT support Ivan T. Ivanov
2013-10-14 15:24 ` [PATCH v3 01/13] usb: phy: msm: Move mach depndend code to platform data Ivan T. Ivanov
2013-10-14 22:52 ` Felipe Balbi
2013-10-15 7:01 ` Ivan T. Ivanov
2013-10-14 15:24 ` [PATCH v3 02/13] usb: phy: msm: Move global regulators variables to driver state Ivan T. Ivanov
2013-10-14 22:52 ` Felipe Balbi
2013-10-14 15:24 ` [PATCH v3 03/13] usb: phy: msm: Migrate to Managed Device Resource allocation Ivan T. Ivanov
2013-10-14 15:24 ` [PATCH v3 04/13] usb: phy: msm: Remove unnecessarily check for valid regulators Ivan T. Ivanov
2013-10-14 15:24 ` Ivan T. Ivanov [this message]
2013-10-14 15:24 ` [PATCH v3 06/13] usb: phy: msm: Fix WARNING: Prefer seq_puts to seq_printf Ivan T. Ivanov
2013-10-14 15:24 ` [PATCH v3 07/13] usb: phy: msm: Replace custom enum usb_mode_type with enum usb_dr_mode Ivan T. Ivanov
2013-10-14 15:24 ` [PATCH v3 08/13] usb: phy: msm: Drop default usb_dr_mode from platform data Ivan T. Ivanov
2013-10-14 15:24 ` [PATCH v3 09/13] usb: phy: msm: Remove unused pclk_src_name Ivan T. Ivanov
2013-10-14 15:24 ` [PATCH v3 10/13] usb: phy: msm: Switch clock consumer strings Ivan T. Ivanov
2013-10-14 15:24 ` [PATCH v3 11/13] usb: phy: msm: Remove HSUSB prefix from requlator names Ivan T. Ivanov
2013-10-14 15:24 ` [PATCH v3 12/13] usb: phy: msm: Properly check core interrupt number Ivan T. Ivanov
2013-10-14 22:59 ` Felipe Balbi
2013-10-15 7:12 ` Ivan T. Ivanov
2013-10-14 15:24 ` [PATCH v3 13/13] usb: phy: msm: Add device tree support and binding information Ivan T. Ivanov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1381764280-28420-6-git-send-email-iivanov@mm-sol.com \
--to=iivanov@mm-sol.com \
--cc=balbi@ti.com \
--cc=bryanh@codeaurora.org \
--cc=davidb@codeaurora.org \
--cc=devicetree@vger.kernel.org \
--cc=dsegal@codeaurora.org \
--cc=dwalker@fifo99.com \
--cc=grant.likely@linaro.org \
--cc=gregkh@linuxfoundation.org \
--cc=ijc+devicetree@hellion.org.uk \
--cc=jackp@codeaurora.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-doc@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=linux@arm.linux.org.uk \
--cc=mark.rutland@arm.com \
--cc=mgautam@codeaurora.org \
--cc=pawel.moll@arm.com \
--cc=rob.herring@calxeda.com \
--cc=rob@landley.net \
--cc=swarren@wwwdotorg.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®