From: Tim Gardner <tim.gardner@canonical.com>
To: linux-security-module@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: Tim Gardner <tim.gardner@canonical.com>,
Stephen Smalley <sds@tycho.nsa.gov>,
James Morris <james.l.morris@oracle.com>,
Eric Paris <eparis@parisplace.org>
Subject: [PATCH linux-next] SELinux: security_load_policy: Silence frame-larger-than warning
Date: Thu, 14 Nov 2013 15:04:51 -0700 [thread overview]
Message-ID: <1384466691-42392-1-git-send-email-tim.gardner@canonical.com> (raw)
Dynamically allocate a couple of the larger stack variables in order to
reduce the stack footprint below 1024. gcc-4.8
security/selinux/ss/services.c: In function 'security_load_policy':
security/selinux/ss/services.c:1964:1: warning: the frame size of 1104 bytes is larger than 1024 bytes [-Wframe-larger-than=]
}
Also silence a couple of checkpatch warnings at the same time.
WARNING: sizeof policydb should be sizeof(policydb)
+ memcpy(oldpolicydb, &policydb, sizeof policydb);
WARNING: sizeof policydb should be sizeof(policydb)
+ memcpy(&policydb, newpolicydb, sizeof policydb);
Cc: Stephen Smalley <sds@tycho.nsa.gov>
Cc: James Morris <james.l.morris@oracle.com>
Cc: Eric Paris <eparis@parisplace.org>
Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
---
security/selinux/ss/services.c | 54 ++++++++++++++++++++++++----------------
1 file changed, 32 insertions(+), 22 deletions(-)
diff --git a/security/selinux/ss/services.c b/security/selinux/ss/services.c
index b4feecc..c8317c8 100644
--- a/security/selinux/ss/services.c
+++ b/security/selinux/ss/services.c
@@ -1828,7 +1828,7 @@ static int security_preserve_bools(struct policydb *p);
*/
int security_load_policy(void *data, size_t len)
{
- struct policydb oldpolicydb, newpolicydb;
+ struct policydb *oldpolicydb, *newpolicydb;
struct sidtab oldsidtab, newsidtab;
struct selinux_mapping *oldmap, *map = NULL;
struct convert_context_args args;
@@ -1837,12 +1837,19 @@ int security_load_policy(void *data, size_t len)
int rc = 0;
struct policy_file file = { data, len }, *fp = &file;
+ oldpolicydb = kzalloc(2 * sizeof(*oldpolicydb), GFP_KERNEL);
+ if (!oldpolicydb) {
+ rc = -ENOMEM;
+ goto out;
+ }
+ newpolicydb = oldpolicydb + 1;
+
if (!ss_initialized) {
avtab_cache_init();
rc = policydb_read(&policydb, fp);
if (rc) {
avtab_cache_destroy();
- return rc;
+ goto out;
}
policydb.len = len;
@@ -1852,14 +1859,14 @@ int security_load_policy(void *data, size_t len)
if (rc) {
policydb_destroy(&policydb);
avtab_cache_destroy();
- return rc;
+ goto out;
}
rc = policydb_load_isids(&policydb, &sidtab);
if (rc) {
policydb_destroy(&policydb);
avtab_cache_destroy();
- return rc;
+ goto out;
}
security_load_policycaps();
@@ -1871,36 +1878,36 @@ int security_load_policy(void *data, size_t len)
selinux_status_update_policyload(seqno);
selinux_netlbl_cache_invalidate();
selinux_xfrm_notify_policyload();
- return 0;
+ goto out;
}
#if 0
sidtab_hash_eval(&sidtab, "sids");
#endif
- rc = policydb_read(&newpolicydb, fp);
+ rc = policydb_read(newpolicydb, fp);
if (rc)
- return rc;
+ goto out;
- newpolicydb.len = len;
+ newpolicydb->len = len;
/* If switching between different policy types, log MLS status */
- if (policydb.mls_enabled && !newpolicydb.mls_enabled)
+ if (policydb.mls_enabled && !newpolicydb->mls_enabled)
printk(KERN_INFO "SELinux: Disabling MLS support...\n");
- else if (!policydb.mls_enabled && newpolicydb.mls_enabled)
+ else if (!policydb.mls_enabled && newpolicydb->mls_enabled)
printk(KERN_INFO "SELinux: Enabling MLS support...\n");
- rc = policydb_load_isids(&newpolicydb, &newsidtab);
+ rc = policydb_load_isids(newpolicydb, &newsidtab);
if (rc) {
printk(KERN_ERR "SELinux: unable to load the initial SIDs\n");
- policydb_destroy(&newpolicydb);
- return rc;
+ policydb_destroy(newpolicydb);
+ goto out;
}
- rc = selinux_set_mapping(&newpolicydb, secclass_map, &map, &map_size);
+ rc = selinux_set_mapping(newpolicydb, secclass_map, &map, &map_size);
if (rc)
goto err;
- rc = security_preserve_bools(&newpolicydb);
+ rc = security_preserve_bools(newpolicydb);
if (rc) {
printk(KERN_ERR "SELinux: unable to preserve booleans\n");
goto err;
@@ -1918,7 +1925,7 @@ int security_load_policy(void *data, size_t len)
* in the new SID table.
*/
args.oldp = &policydb;
- args.newp = &newpolicydb;
+ args.newp = newpolicydb;
rc = sidtab_map(&newsidtab, convert_context, &args);
if (rc) {
printk(KERN_ERR "SELinux: unable to convert the internal"
@@ -1928,12 +1935,12 @@ int security_load_policy(void *data, size_t len)
}
/* Save the old policydb and SID table to free later. */
- memcpy(&oldpolicydb, &policydb, sizeof policydb);
+ memcpy(oldpolicydb, &policydb, sizeof(policydb));
sidtab_set(&oldsidtab, &sidtab);
/* Install the new policydb and SID table. */
write_lock_irq(&policy_rwlock);
- memcpy(&policydb, &newpolicydb, sizeof policydb);
+ memcpy(&policydb, newpolicydb, sizeof(policydb));
sidtab_set(&sidtab, &newsidtab);
security_load_policycaps();
oldmap = current_mapping;
@@ -1943,7 +1950,7 @@ int security_load_policy(void *data, size_t len)
write_unlock_irq(&policy_rwlock);
/* Free the old policydb and SID table. */
- policydb_destroy(&oldpolicydb);
+ policydb_destroy(oldpolicydb);
sidtab_destroy(&oldsidtab);
kfree(oldmap);
@@ -1953,14 +1960,17 @@ int security_load_policy(void *data, size_t len)
selinux_netlbl_cache_invalidate();
selinux_xfrm_notify_policyload();
- return 0;
+ rc = 0;
+ goto out;
err:
kfree(map);
sidtab_destroy(&newsidtab);
- policydb_destroy(&newpolicydb);
- return rc;
+ policydb_destroy(newpolicydb);
+out:
+ kfree(oldpolicydb);
+ return rc;
}
size_t security_policydb_len(void)
--
1.7.9.5
next reply other threads:[~2013-11-14 22:05 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-11-14 22:04 Tim Gardner [this message]
2013-11-19 22:38 ` Paul Moore
2013-11-19 22:46 ` Tim Gardner
2013-11-19 23:01 ` Paul Moore
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1384466691-42392-1-git-send-email-tim.gardner@canonical.com \
--to=tim.gardner@canonical.com \
--cc=eparis@parisplace.org \
--cc=james.l.morris@oracle.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-security-module@vger.kernel.org \
--cc=sds@tycho.nsa.gov \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®