mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
To: Santosh Shilimkar <santosh.shilimkar@ti.com>,
	Rob Landley <rob@landley.net>,
	Russell King <linux@arm.linux.org.uk>
Cc: <devicetree@vger.kernel.org>, Pawel Moll <pawel.moll@arm.com>,
	Mark Rutland <mark.rutland@arm.com>,
	Rob Herring <rob.herring@calxeda.com>,
	Stephen Warren <swarren@wwwdotorg.org>,
	Kumar Gala <galak@kernel.crashing.org>,
	Ian Campbell <ijc+devicetree@hellion.org.uk>,
	<linux-kernel@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-mtd@lists.infradead.org>, <grygorii.strashko@ti.com>,
	Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
Subject: [PATCH 4/7] mtd: nand: davinci: simplify error handling
Date: Wed, 20 Nov 2013 17:22:22 +0200	[thread overview]
Message-ID: <1384960945-14528-5-git-send-email-ivan.khoronzhuk@ti.com> (raw)
In-Reply-To: <1384960945-14528-1-git-send-email-ivan.khoronzhuk@ti.com>

There is not needed to use a lot of names for err handling.
It complicates code support and reading.

Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
---
 drivers/mtd/nand/davinci_nand.c |   46 +++++++++++++++------------------------
 1 file changed, 17 insertions(+), 29 deletions(-)

diff --git a/drivers/mtd/nand/davinci_nand.c b/drivers/mtd/nand/davinci_nand.c
index 9a96ac7..c0be223 100644
--- a/drivers/mtd/nand/davinci_nand.c
+++ b/drivers/mtd/nand/davinci_nand.c
@@ -615,8 +615,7 @@ static int __init nand_davinci_probe(struct platform_device *pdev)
 	info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL);
 	if (!info) {
 		dev_err(&pdev->dev, "unable to allocate memory\n");
-		ret = -ENOMEM;
-		goto err_nomem;
+		return -ENOMEM;
 	}
 
 	platform_set_drvdata(pdev, info);
@@ -625,20 +624,16 @@ static int __init nand_davinci_probe(struct platform_device *pdev)
 	res2 = platform_get_resource(pdev, IORESOURCE_MEM, 1);
 	if (!res1 || !res2) {
 		dev_err(&pdev->dev, "resource missing\n");
-		ret = -EINVAL;
-		goto err_nomem;
+		return -EINVAL;
 	}
 
 	vaddr = devm_ioremap_resource(&pdev->dev, res1);
-	if (IS_ERR(vaddr)) {
-		ret = PTR_ERR(vaddr);
-		goto err_ioremap;
-	}
+	if (IS_ERR(vaddr))
+		return PTR_ERR(vaddr);
+
 	base = devm_ioremap_resource(&pdev->dev, res2);
-	if (IS_ERR(base)) {
-		ret = PTR_ERR(base);
-		goto err_ioremap;
-	}
+	if (IS_ERR(base))
+		return PTR_ERR(base);
 
 	info->dev		= &pdev->dev;
 	info->base		= base;
@@ -705,7 +700,7 @@ static int __init nand_davinci_probe(struct platform_device *pdev)
 			spin_unlock_irq(&davinci_nand_lock);
 
 			if (ret == -EBUSY)
-				goto err_ecc;
+				return ret;
 
 			info->chip.ecc.calculate = nand_davinci_calculate_4bit;
 			info->chip.ecc.correct = nand_davinci_correct_4bit;
@@ -721,8 +716,7 @@ static int __init nand_davinci_probe(struct platform_device *pdev)
 		info->chip.ecc.strength = pdata->ecc_bits;
 		break;
 	default:
-		ret = -EINVAL;
-		goto err_ecc;
+		return -EINVAL;
 	}
 	info->chip.ecc.mode = ecc_mode;
 
@@ -730,7 +724,7 @@ static int __init nand_davinci_probe(struct platform_device *pdev)
 	if (IS_ERR(info->clk)) {
 		ret = PTR_ERR(info->clk);
 		dev_dbg(&pdev->dev, "unable to get AEMIF clock, err %d\n", ret);
-		goto err_clk;
+		return ret;
 	}
 
 	ret = clk_prepare_enable(info->clk);
@@ -759,7 +753,7 @@ static int __init nand_davinci_probe(struct platform_device *pdev)
 							info->core_chipsel);
 	if (ret < 0) {
 		dev_dbg(&pdev->dev, "NAND timing values setup fail\n");
-		goto err_timing;
+		goto err;
 	}
 
 	spin_lock_irq(&davinci_nand_lock);
@@ -775,7 +769,7 @@ static int __init nand_davinci_probe(struct platform_device *pdev)
 	ret = nand_scan_ident(&info->mtd, pdata->mask_chipsel ? 2 : 1, NULL);
 	if (ret < 0) {
 		dev_dbg(&pdev->dev, "no NAND chip(s) found\n");
-		goto err_scan;
+		goto err;
 	}
 
 	/* Update ECC layout if needed ... for 1-bit HW ECC, the default
@@ -789,7 +783,7 @@ static int __init nand_davinci_probe(struct platform_device *pdev)
 		if (!chunks || info->mtd.oobsize < 16) {
 			dev_dbg(&pdev->dev, "too small\n");
 			ret = -EINVAL;
-			goto err_scan;
+			goto err;
 		}
 
 		/* For small page chips, preserve the manufacturer's
@@ -820,7 +814,7 @@ static int __init nand_davinci_probe(struct platform_device *pdev)
 		dev_warn(&pdev->dev, "no 4-bit ECC support yet "
 				"for 4KiB-page NAND\n");
 		ret = -EIO;
-		goto err_scan;
+		goto err;
 
 syndrome_done:
 		info->chip.ecc.layout = &info->ecclayout;
@@ -828,7 +822,7 @@ syndrome_done:
 
 	ret = nand_scan_tail(&info->mtd);
 	if (ret < 0)
-		goto err_scan;
+		goto err;
 
 	if (pdata->parts)
 		ret = mtd_device_parse_register(&info->mtd, NULL, NULL,
@@ -841,7 +835,7 @@ syndrome_done:
 						NULL, 0);
 	}
 	if (ret < 0)
-		goto err_scan;
+		goto err;
 
 	val = davinci_nand_readl(info, NRCSR_OFFSET);
 	dev_info(&pdev->dev, "controller rev. %d.%d\n",
@@ -849,8 +843,7 @@ syndrome_done:
 
 	return 0;
 
-err_scan:
-err_timing:
+err:
 	clk_disable_unprepare(info->clk);
 
 err_clk_enable:
@@ -858,11 +851,6 @@ err_clk_enable:
 	if (ecc_mode == NAND_ECC_HW_SYNDROME)
 		ecc4_busy = false;
 	spin_unlock_irq(&davinci_nand_lock);
-
-err_ecc:
-err_clk:
-err_ioremap:
-err_nomem:
 	return ret;
 }
 
-- 
1.7.9.5


  parent reply	other threads:[~2013-11-20 15:24 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-11-20 15:22 [PATCH 0/7] Davinci nand driver fixes and updates Ivan Khoronzhuk
2013-11-20 15:22 ` [PATCH 1/7] mtd: nand: davinci: fix driver registration Ivan Khoronzhuk
2013-11-20 15:22 ` [PATCH 2/7] mtd: nand: davinci: return ENOMEM if memory allocation is failed Ivan Khoronzhuk
2013-11-20 15:22 ` [PATCH 3/7] mtd: nand: davinci: check required ti,davinci-chipselect property Ivan Khoronzhuk
2013-11-20 15:22 ` Ivan Khoronzhuk [this message]
2013-11-20 15:22 ` [PATCH 5/7] mtd: nand: davinci: move bindings under mtd Ivan Khoronzhuk
2013-11-20 15:22 ` [PATCH 6/7] mtd: nand: davinci: extend description of bindings Ivan Khoronzhuk
2013-11-20 15:46   ` Arnd Bergmann
2013-11-20 15:54     ` ivan.khoronzhuk
2013-11-20 15:22 ` [PATCH 7/7] mtd: nand: davinci: adjust DT properties to MTD generic Ivan Khoronzhuk
2013-11-20 20:13 ` [PATCH 0/7] Davinci nand driver fixes and updates Grygorii Strashko
2013-11-29 15:37 ` Santosh Shilimkar
2013-11-29 15:44   ` Grygorii Strashko

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1384960945-14528-5-git-send-email-ivan.khoronzhuk@ti.com \
    --to=ivan.khoronzhuk@ti.com \
    --cc=devicetree@vger.kernel.org \
    --cc=galak@kernel.crashing.org \
    --cc=grygorii.strashko@ti.com \
    --cc=ijc+devicetree@hellion.org.uk \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mtd@lists.infradead.org \
    --cc=linux@arm.linux.org.uk \
    --cc=mark.rutland@arm.com \
    --cc=pawel.moll@arm.com \
    --cc=rob.herring@calxeda.com \
    --cc=rob@landley.net \
    --cc=santosh.shilimkar@ti.com \
    --cc=swarren@wwwdotorg.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®