From: joeyli <jlee@suse.com>
To: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Cc: Madper Xie <cxie@redhat.com>,
Matt Fleming <matt@console-pimps.org>,
Richard Weinberger <richard@nod.at>,
linux-efi@vger.kernel.org, linux-kernel@vger.kernel.org,
matt.fleming@intel.com, matthew.garrett@nebula.com
Subject: Re: [PATCH] x86, efi: change name of efi_no_storage_paranoia parameter to efi_storage_paranoia
Date: Thu, 21 Nov 2013 17:53:43 +0800 [thread overview]
Message-ID: <1385027623.6516.4090.camel@linux-s257.site> (raw)
In-Reply-To: <528DCED7.5070806@jp.fujitsu.com>
於 四,2013-11-21 於 18:13 +0900,Yasuaki Ishimatsu 提到:
> (2013/11/20 17:08), joeyli wrote:
> > 於 三,2013-11-20 於 15:26 +0900,Yasuaki Ishimatsu 提到:
> >> (2013/11/19 12:16), Madper Xie wrote:
> >>>
> >>> isimatu.yasuaki@jp.fujitsu.com writes:
> >>>
> >>>> Hi Matt,
> >>>>
> >>>> Sorry for late the reply.
> >>>>
> >>>>
> >>>> (2013/11/11 19:54), Matt Fleming wrote:
> >>>>> On Mon, 11 Nov, at 05:52:59PM, Yasuaki Ishimatsu wrote:
> >>>>>> Hi Matt,
> >>>>>>
> >>>>>> I uses FUJITSU's x86 box.
> >>>>>> This does not become bricked even if I use all efi variable storage.
> >>>>>> Thus I want a way to not need to specify efi_no_storage_paranoia
> >>>>>> parameter.
> >>>>>
> >>>>> The efi_no_storage_paranoia parameter was introduced because some
> >>>>> machines do not initiate garbage collection of the NVRAM until you
> >>>>> allocate all space - basically it's a switch to turn off the "save 5KB
> >>>>> of stoarge at all times" workaround that is needed to avoid bricking
> >>>>> some machines.
> >>>>>
> >>>>> The intention of the switch is not to allow you to fill your NVRAM just
> >>>>> because you can. If that is something you want to do then I think it's
> >>>>> fair to require you to explicitly turn on efi_no_storage_paranoia. But
> >>>>> I'm assuming here that you are doing something like writing lots and
> >>>>> lots of pstore entries and just want to write as many as your variable
> >>>>> storage will allow? Or are you doing something more fundamental like
> >>>>> creating BootXXXX entries?
> >>>>>
> >>>>> What are you doing to run into the 5KB reserve? How much NVRAM does your
> >>>>> machine come with?
> >>>>
> >>>> I just add boot entry to NVRAM by efibootmgr command. But when Linux boots up,
> >>>> the remaining NVRAM is less than 5Kbyte. So I cannnot add new entry.
> >>>>
> >>> Howdy Yasuaki,
> >>> If the remaining NVRAM is less than 5Kb, your writing will trigger a
> >>> NVRAM storage reclamation. However you still failed creating entry. So
> >>> I'm just curious what itmes occupy lots of nvram storage space.
> >>
> >> Even if we got EFI_OUT_OF_RESOURCES while running Linux, gc does not run.
> >> Trigger of gc is when EFI_OUT_OF_RESOURCES occurs on pre OS environment with
> >> UEFI. So on my system, if EFI_OUT_OF_RESOURCES occurs by the 5Kbyte threshold,
> >> we cannot use nvram storage until EFI_OUT_OF_RESOURCES occurs on pre OS
> >> environment with UEFI.
> >>
> >> Thanks,
> >> Yasuaki Ishimatsu
> >
> > Can we try to trigger gc by EFI_OUT_OF_RESOURCE in EFI stub kernel or
> > EFI boot loader to recover NVRAM space? Does work with the BIOS on this
> > machine?
>
> Yes. I can trigger gc by EFI_OUT_OF_RESOUCE in EFI shell on my machine.
>
> Thanks,
> Yasuaki Ishimatu
>
OK, then maybe can try to trigger gc in EFI stub before
ExitBootService().
Another problem is what's the reasonable threshold. The threshold should
bigger then 5Kbyte, then we write a dummy BootTime NV variable to
trigger gc.
Thanks
Joey Lee
next prev parent reply other threads:[~2013-11-21 9:54 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-11-08 7:33 Yasuaki Ishimatsu
2013-11-08 8:05 ` Richard Weinberger
2013-11-08 8:46 ` Madper Xie
2013-11-08 9:34 ` Yasuaki Ishimatsu
2013-11-08 9:37 ` Richard Weinberger
2013-11-08 10:25 ` Yasuaki Ishimatsu
2013-11-08 10:29 ` Richard Weinberger
2013-11-08 10:32 ` Yasuaki Ishimatsu
2013-11-08 14:34 ` Matt Fleming
2013-11-11 8:52 ` Yasuaki Ishimatsu
2013-11-11 9:47 ` Madper Xie
2013-11-11 10:54 ` Matt Fleming
2013-11-19 3:03 ` Yasuaki Ishimatsu
2013-11-19 3:16 ` Madper Xie
2013-11-20 6:26 ` Yasuaki Ishimatsu
2013-11-20 8:08 ` joeyli
2013-11-21 9:13 ` Yasuaki Ishimatsu
2013-11-21 9:53 ` joeyli [this message]
2013-11-21 10:27 ` joeyli
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1385027623.6516.4090.camel@linux-s257.site \
--to=jlee@suse.com \
--cc=cxie@redhat.com \
--cc=isimatu.yasuaki@jp.fujitsu.com \
--cc=linux-efi@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=matt.fleming@intel.com \
--cc=matt@console-pimps.org \
--cc=matthew.garrett@nebula.com \
--cc=richard@nod.at \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome