From: Krzysztof Kozlowski <k.kozlowski@samsung.com>
To: MyungJoo Ham <myungjoo.ham@samsung.com>,
Chanwoo Choi <cw00.choi@samsung.com>,
Samuel Ortiz <sameo@linux.intel.com>,
Lee Jones <lee.jones@linaro.org>,
Anton Vorontsov <anton@enomsg.org>,
David Woodhouse <dwmw2@infradead.org>,
Liam Girdwood <lgirdwood@gmail.com>,
Mark Brown <broonie@kernel.org>,
Grant Likely <grant.likely@linaro.org>,
Rob Herring <rob.herring@calxeda.com>,
linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
Pawel Moll <pawel.moll@arm.com>,
Stephen Warren <swarren@wwwdotorg.org>,
Ian Campbell <ijc+devicetree@hellion.org.uk>,
Rob Landley <rob@landley.net>,
linux-doc@vger.kernel.org, linux-arm-kernel@lists.infradead.org
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>,
Marek Szyprowski <m.szyprowski@samsung.com>,
Kyungmin Park <kyungmin.park@samsung.com>,
Krzysztof Kozlowski <k.kozlowski@samsung.com>
Subject: [PATCH v3 0/5] mfd: max14577: Add max14577 MFD drivers
Date: Fri, 22 Nov 2013 09:46:07 +0100 [thread overview]
Message-ID: <1385109972-28059-1-git-send-email-k.kozlowski@samsung.com> (raw)
Hi,
This is third version of patchset adding drivers for MAXIM 14577 chip.
Description
-----------
The chip contains Micro-USB Interface Circuit and Li+ Battery Charger.
It contains accessory and USB charger detection logic. It supports USB 2.0
Hi-Speed, UART and stereo audio signals over Micro-USB connector.
The battery charger is compliant with the USB Battery Charging Specification
Revision 1.1. It has also SFOUT LDO output for powering USB devices.
The patchset consists of following drivers:
1. MFD core driver.
2. Extcon driver for the MUIC (Micro USB Interface Controller).
3. Charger driver using power supply class.
4. Regulator driver for SFOUT and charger.
5. Documentation of device tree bindings.
The patchset is rebased on latest Linus' tree (v3.12-10928-g527d151) however
testing was mostly done on 3.10.
Changes since v2:
-----------------
1. Replaced max14577-irq.c with regmap_irq_chip, as suggested by Mark Brown.
2. Applied suggestions from review (Mark Brown, Lee Jones).
3. Regulator: Added registering unconditionally of all regulators (Mark Brown).
4. Regulator: Removed the "struct max14577_regulator *info" (Bartlomiej
Zolnierkiewicz).
5. Extcon: Removed work-around for hardware reboot (USB cable attached with
factory button set to D/L mode) as it is not needed.
Changes since v1:
-----------------
1. Applied comments from review (Mark Brown, Mark Rutland).
2. Removed any DT bindings which are not needed.
3. Removed "wakeup" node from bindings.
4. Fixed interrupt handling during resume. This lead to removal of the weird
IRQ/GPIO code discussed during review.
5. Minor fixes pointed by checkpatch, added authors.
6. Use of_get_child_by_name() for accessing regulators bindings.
7. Added documentation of bindings (fifth patch).
Best regards,
Krzysztof Kozlowski
Chanwoo Choi (2):
mfd: max14577: Add max14577 MFD driver core
extcon: max14577: Add extcon-max14577 driver to support MUIC device
Krzysztof Kozlowski (3):
charger: max14577: Add charger support for Maxim 14577
regulator: max14577: Add regulator driver for Maxim 14577
mfd: max14577: Add device tree bindings document
Documentation/devicetree/bindings/mfd/max14577.txt | 48 ++
drivers/extcon/Kconfig | 10 +
drivers/extcon/Makefile | 1 +
drivers/extcon/extcon-max14577.c | 795 ++++++++++++++++++++
drivers/mfd/Kconfig | 13 +
drivers/mfd/Makefile | 1 +
drivers/mfd/max14577.c | 241 ++++++
drivers/power/Kconfig | 7 +
drivers/power/Makefile | 1 +
drivers/power/max14577_charger.c | 322 ++++++++
drivers/regulator/Kconfig | 7 +
drivers/regulator/Makefile | 1 +
drivers/regulator/max14577.c | 272 +++++++
include/linux/mfd/max14577-private.h | 324 ++++++++
include/linux/mfd/max14577.h | 69 ++
15 files changed, 2112 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mfd/max14577.txt
create mode 100644 drivers/extcon/extcon-max14577.c
create mode 100644 drivers/mfd/max14577.c
create mode 100644 drivers/power/max14577_charger.c
create mode 100644 drivers/regulator/max14577.c
create mode 100644 include/linux/mfd/max14577-private.h
create mode 100644 include/linux/mfd/max14577.h
--
1.7.9.5
next reply other threads:[~2013-11-22 8:46 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-11-22 8:46 Krzysztof Kozlowski [this message]
2013-11-22 8:46 ` [PATCH v3 1/5] mfd: max14577: Add max14577 MFD driver core Krzysztof Kozlowski
2013-11-22 9:31 ` Lee Jones
2013-11-22 9:58 ` Krzysztof Kozlowski
2013-11-22 10:07 ` Lee Jones
2013-11-22 10:36 ` Mark Brown
2013-11-22 8:46 ` [PATCH v3 2/5] extcon: max14577: Add extcon-max14577 driver to support MUIC device Krzysztof Kozlowski
2013-11-22 10:35 ` Mark Brown
2013-11-22 11:34 ` Krzysztof Kozlowski
2013-11-22 8:46 ` [PATCH v3 3/5] charger: max14577: Add charger support for Maxim 14577 Krzysztof Kozlowski
[not found] ` <1385110476.285183224@f131.i.mail.ru>
2013-11-22 9:57 ` Krzysztof Kozlowski
2013-11-22 8:46 ` [PATCH v3 4/5] regulator: max14577: Add regulator driver " Krzysztof Kozlowski
2013-11-22 9:16 ` Lee Jones
2013-11-22 9:23 ` Krzysztof Kozlowski
2013-11-22 10:15 ` Lee Jones
2013-11-22 15:55 ` Krzysztof Kozlowski
2013-11-22 13:00 ` Bartlomiej Zolnierkiewicz
2013-11-22 8:46 ` [PATCH v3 5/5] mfd: max14577: Add device tree bindings document Krzysztof Kozlowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1385109972-28059-1-git-send-email-k.kozlowski@samsung.com \
--to=k.kozlowski@samsung.com \
--cc=anton@enomsg.org \
--cc=b.zolnierkie@samsung.com \
--cc=broonie@kernel.org \
--cc=cw00.choi@samsung.com \
--cc=devicetree@vger.kernel.org \
--cc=dwmw2@infradead.org \
--cc=grant.likely@linaro.org \
--cc=ijc+devicetree@hellion.org.uk \
--cc=kyungmin.park@samsung.com \
--cc=lee.jones@linaro.org \
--cc=lgirdwood@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-doc@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=m.szyprowski@samsung.com \
--cc=myungjoo.ham@samsung.com \
--cc=pawel.moll@arm.com \
--cc=rob.herring@calxeda.com \
--cc=rob@landley.net \
--cc=sameo@linux.intel.com \
--cc=swarren@wwwdotorg.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®