From: Keerthy <j-keerthy@ti.com>
To: <rob.herring@calxeda.com>, <pawel.moll@arm.com>,
<mark.rutland@arm.com>, <swarren@wwwdotorg.org>,
<ijc+devicetree@hellion.org.uk>, <rob@landley.net>,
<sameo@linux.intel.com>, <lee.jones@linaro.org>,
<grant.likely@linaro.org>, <lgirdwood@gmail.com>,
<broonie@kernel.org>
Cc: <j-keerthy@ti.com>, <devicetree@vger.kernel.org>,
<linux-doc@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<linux-omap@vger.kernel.org>
Subject: [PATCH 1/4] mfd: DT bindings for TPS65218 PMIC
Date: Tue, 3 Dec 2013 12:13:22 +0530 [thread overview]
Message-ID: <1386053006-6480-2-git-send-email-j-keerthy@ti.com> (raw)
In-Reply-To: <1386053006-6480-1-git-send-email-j-keerthy@ti.com>
Add DT bindings for TPS65218 PMIC.
Signed-off-by: Keerthy <j-keerthy@ti.com>
---
Documentation/devicetree/bindings/mfd/tps65218.txt | 27 ++++++++++++++++++++
.../devicetree/bindings/regulator/tps65218.txt | 22 ++++++++++++++++
2 files changed, 49 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mfd/tps65218.txt
create mode 100644 Documentation/devicetree/bindings/regulator/tps65218.txt
diff --git a/Documentation/devicetree/bindings/mfd/tps65218.txt b/Documentation/devicetree/bindings/mfd/tps65218.txt
new file mode 100644
index 0000000..87cb7a8
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/tps65218.txt
@@ -0,0 +1,27 @@
+The TPS65218 Integrated Power Management Chips.
+These chips are connected to an i2c bus.
+
+Required properties:
+- compatible : Must be "ti,tps65218";
+- interrupts : This i2c device has an IRQ line connected to the main SoC
+- interrupt-controller : Since the tps65218 support several interrupts
+ internally, it is considered as an interrupt controller cascaded to the SoC.
+- #interrupt-cells = <2>;
+- interrupt-parent : The parent interrupt controller.
+
+Optional node:
+- Child nodes contain in the tps65218.
+ It supports a number of features.
+ The children nodes will thus depend of the capability of the variant.
+
+Example:
+/*
+ * Integrated Power Management Chip
+ */
+tps@24 {
+ compatible = "ti,tps65218";
+ reg = <0x24>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&gic>;
+};
diff --git a/Documentation/devicetree/bindings/regulator/tps65218.txt b/Documentation/devicetree/bindings/regulator/tps65218.txt
new file mode 100644
index 0000000..1ccf170
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/tps65218.txt
@@ -0,0 +1,22 @@
+TPS65218 family of regulators
+
+Required properties:
+For tps65218 regulators/LDOs
+- compatible:
+ - "ti,tps65218-dcdc1" for DCDC1
+ - "ti,tps65218-dcdc2" for DCDC2
+ - "ti,tps65218-dcdc3" for DCDC3
+ - "ti,tps65218-dcdc4" for DCDC4
+ - "ti,tps65218-dcdc5" for DCDC5
+ - "ti,tps65218-dcdc6" for DCDC6
+ - "ti,tps65218-ldo1" for LDO1 LDO
+
+Optional properties:
+- Any optional property defined in bindings/regulator/regulator.txt
+
+Example:
+ xyz: regulator@0 {
+ compatible = "ti,tps65218-dcdc1";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <3000000>;
+ };
--
1.7.9.5
next prev parent reply other threads:[~2013-12-03 6:44 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-12-03 6:43 [PATCH 0/4] mfd: TPS65218: Add support " Keerthy
2013-12-03 6:43 ` Keerthy [this message]
2013-12-03 9:36 ` [PATCH 1/4] mfd: DT bindings " Lee Jones
2013-12-03 10:52 ` Keerthy
2013-12-03 11:04 ` Lee Jones
2013-12-03 6:43 ` [PATCH 2/4] MFD: TPS65218: Add driver for the " Keerthy
2013-12-03 9:24 ` Lee Jones
2013-12-03 10:06 ` Keerthy
2013-12-03 11:21 ` Lee Jones
2013-12-03 13:28 ` Mark Brown
2013-12-03 15:19 ` Mark Brown
2013-12-03 6:43 ` [PATCH 3/4] Regulators: TPS65218: Add Regulator driver for " Keerthy
2013-12-03 15:16 ` Mark Brown
2013-12-04 5:59 ` Keerthy
2013-12-04 7:39 ` Manish Badarkhe
2013-12-03 6:43 ` [PATCH 4/4] ARM: dts: AM437x: Add TPS65218 device tree nodes Keerthy
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1386053006-6480-2-git-send-email-j-keerthy@ti.com \
--to=j-keerthy@ti.com \
--cc=broonie@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=grant.likely@linaro.org \
--cc=ijc+devicetree@hellion.org.uk \
--cc=lee.jones@linaro.org \
--cc=lgirdwood@gmail.com \
--cc=linux-doc@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=pawel.moll@arm.com \
--cc=rob.herring@calxeda.com \
--cc=rob@landley.net \
--cc=sameo@linux.intel.com \
--cc=swarren@wwwdotorg.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome