From: Gary Rookard <garyrookard@gmail.com>
To: gregkh@linuxfoundation.org
Cc: lisa@xenapiadmin.com, devel@driverdev.osuosl.org,
linux-kernel@vger.kernel.org,
Gary Rookard <garyrookard@gmail.com>
Subject: [PATCH 5/5] Staging: bcm: DDRInit: Fixed coding style issue, replaced spaces w/ tab.(patch set)
Date: Wed, 4 Dec 2013 20:04:01 -0500 [thread overview]
Message-ID: <1386205441-3162-1-git-send-email-garyrookard@gmail.com> (raw)
This is the fifth and final patch for replace spaces w/tab.(5)
Replaced spaces in margin w/ 1 tab for lines:
193-197, 199-200, 202-205, 207, 209-242, 244, 246
Signed-off-by: Gary Alan Rookard <garyrookard@gmail.com>
On branch staging-next
---
drivers/staging/bcm/DDRInit.c | 96 +++++++++++++++++++++----------------------
1 file changed, 48 insertions(+), 48 deletions(-)
diff --git a/drivers/staging/bcm/DDRInit.c b/drivers/staging/bcm/DDRInit.c
index fdeb4f6..dc14cf5 100644
--- a/drivers/staging/bcm/DDRInit.c
+++ b/drivers/staging/bcm/DDRInit.c
@@ -190,60 +190,60 @@ static struct bcm_ddr_setting asDPLL_266MHZ[] = {
#define T3B_SKIP_CLOCK_PROGRAM_DUMP_133MHZ 11 //index for 0x0F007000
static struct bcm_ddr_setting asT3B_DDRSetting133MHz[] = {// # DPLL Clock Setting
- {0x0f000810,0x00000F95},
- {0x0f000810,0x00000F95},
- {0x0f000810,0x00000F95},
- {0x0f000820,0x07F13652},
- {0x0f000840,0x0FFF0800},
+ {0x0f000810,0x00000F95},
+ {0x0f000810,0x00000F95},
+ {0x0f000810,0x00000F95},
+ {0x0f000820,0x07F13652},
+ {0x0f000840,0x0FFF0800},
// Changed source for X-bar and MIPS clock to APLL
- {0x0f000880,0x000003DD},
- {0x0f000860,0x00000000},
+ {0x0f000880,0x000003DD},
+ {0x0f000860,0x00000000},
// Changed source for X-bar and MIPS clock to APLL
- {0x0F00a044,0x1fffffff},
- {0x0F00a040,0x1f000000},
- {0x0F00a084,0x1Cffffff},
- {0x0F00a080,0x1C000000},
+ {0x0F00a044,0x1fffffff},
+ {0x0F00a040,0x1f000000},
+ {0x0F00a084,0x1Cffffff},
+ {0x0F00a080,0x1C000000},
//# Enable 2 ports within X-bar
- {0x0F00A000,0x00000016},
+ {0x0F00A000,0x00000016},
//Memcontroller Default values
- {0x0F007000,0x00010001},
- {0x0F007004,0x01010100},
- {0x0F007008,0x01000001},
- {0x0F00700c,0x00000000},
- {0x0F007010,0x01000000},
- {0x0F007014,0x01000100},
- {0x0F007018,0x01000000},
- {0x0F00701c,0x01020001},// POP - 0x00020001 Normal 0x01020001
- {0x0F007020,0x04030107}, //Normal - 0x04030107 POP - 0x05030107
- {0x0F007024,0x02000007},
- {0x0F007028,0x02020202},
- {0x0F00702c,0x0206060a},//ROB- 0x0205050a,//0x0206060a
- {0x0F007030,0x05000000},
- {0x0F007034,0x00000003},
- {0x0F007038,0x130a0200},//ROB - 0x110a0200,//0x180a0200,// 0x1f0a0200
- {0x0F00703C,0x02101012},//ROB - 0x02101010,//0x02101018},
- {0x0F007040,0x457D1200},//ROB - 0x45751200,//0x450f1200},
- {0x0F007044,0x11130d00},//ROB - 0x110a0d00//0x111f0d00
- {0x0F007048,0x040D0306},
- {0x0F00704c,0x00000000},
- {0x0F007050,0x0000001c},
- {0x0F007054,0x00000000},
- {0x0F007058,0x00000000},
- {0x0F00705c,0x00000000},
- {0x0F007060,0x0010246c},
- {0x0F007064,0x00000012},
- {0x0F007068,0x00000000},
- {0x0F00706c,0x00000001},
- {0x0F007070,0x00007000},
- {0x0F007074,0x00000000},
- {0x0F007078,0x00000000},
- {0x0F00707C,0x00000000},
- {0x0F007080,0x00000000},
- {0x0F007084,0x00000000},
+ {0x0F007000,0x00010001},
+ {0x0F007004,0x01010100},
+ {0x0F007008,0x01000001},
+ {0x0F00700c,0x00000000},
+ {0x0F007010,0x01000000},
+ {0x0F007014,0x01000100},
+ {0x0F007018,0x01000000},
+ {0x0F00701c,0x01020001},// POP - 0x00020001 Normal 0x01020001
+ {0x0F007020,0x04030107}, //Normal - 0x04030107 POP - 0x05030107
+ {0x0F007024,0x02000007},
+ {0x0F007028,0x02020202},
+ {0x0F00702c,0x0206060a},//ROB- 0x0205050a,//0x0206060a
+ {0x0F007030,0x05000000},
+ {0x0F007034,0x00000003},
+ {0x0F007038,0x130a0200},//ROB - 0x110a0200,//0x180a0200,// 0x1f0a0200
+ {0x0F00703C,0x02101012},//ROB - 0x02101010,//0x02101018},
+ {0x0F007040,0x457D1200},//ROB - 0x45751200,//0x450f1200},
+ {0x0F007044,0x11130d00},//ROB - 0x110a0d00//0x111f0d00
+ {0x0F007048,0x040D0306},
+ {0x0F00704c,0x00000000},
+ {0x0F007050,0x0000001c},
+ {0x0F007054,0x00000000},
+ {0x0F007058,0x00000000},
+ {0x0F00705c,0x00000000},
+ {0x0F007060,0x0010246c},
+ {0x0F007064,0x00000012},
+ {0x0F007068,0x00000000},
+ {0x0F00706c,0x00000001},
+ {0x0F007070,0x00007000},
+ {0x0F007074,0x00000000},
+ {0x0F007078,0x00000000},
+ {0x0F00707C,0x00000000},
+ {0x0F007080,0x00000000},
+ {0x0F007084,0x00000000},
//# Enable BW improvement within memory controller
- {0x0F007094,0x00000104},
+ {0x0F007094,0x00000104},
//# Enable start bit within memory controller
- {0x0F007018,0x01010000},
+ {0x0F007018,0x01010000},
};
#define T3B_SKIP_CLOCK_PROGRAM_DUMP_80MHZ 9 //index for 0x0F007000
--
1.8.4
reply other threads:[~2013-12-05 1:04 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1386205441-3162-1-git-send-email-garyrookard@gmail.com \
--to=garyrookard@gmail.com \
--cc=devel@driverdev.osuosl.org \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=lisa@xenapiadmin.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®