From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1161315Ab3LFNAo (ORCPT ); Fri, 6 Dec 2013 08:00:44 -0500 Received: from youngberry.canonical.com ([91.189.89.112]:43767 "EHLO youngberry.canonical.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1161297Ab3LFNAk (ORCPT ); Fri, 6 Dec 2013 08:00:40 -0500 From: Luis Henriques To: linux-kernel@vger.kernel.org, stable@vger.kernel.org, kernel-team@lists.ubuntu.com Cc: Doug Anderson , Olof Johansson , Luis Henriques Subject: [PATCH 3.11 053/272] ARM: dts: Add max77686 RTC interrupt to cros5250-common Date: Fri, 6 Dec 2013 12:55:42 +0000 Message-Id: <1386334761-25517-54-git-send-email-luis.henriques@canonical.com> X-Mailer: git-send-email 1.8.3.2 In-Reply-To: <1386334761-25517-1-git-send-email-luis.henriques@canonical.com> References: <1386334761-25517-1-git-send-email-luis.henriques@canonical.com> X-Extended-Stable: 3.11 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org 3.11.10.1 -stable review patch. If anyone has any objections, please let me know. ------------------ From: Doug Anderson commit c61248afa8190ae3f47ee67f46e3c9b584a73d31 upstream. Without the interrupt you'll get problems if you enable CONFIG_RTC_DRV_MAX77686. Setup the interrupt properly in the device tree. Signed-off-by: Doug Anderson Tested-by: Marc Zyngier Signed-off-by: Olof Johansson Signed-off-by: Luis Henriques --- arch/arm/boot/dts/cros5250-common.dtsi | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/arch/arm/boot/dts/cros5250-common.dtsi b/arch/arm/boot/dts/cros5250-common.dtsi index dc259e8b..9b186ac 100644 --- a/arch/arm/boot/dts/cros5250-common.dtsi +++ b/arch/arm/boot/dts/cros5250-common.dtsi @@ -27,6 +27,13 @@ i2c2_bus: i2c2-bus { samsung,pin-pud = <0>; }; + + max77686_irq: max77686-irq { + samsung,pins = "gpx3-2"; + samsung,pin-function = <0>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; }; i2c@12C60000 { @@ -35,6 +42,11 @@ max77686@09 { compatible = "maxim,max77686"; + interrupt-parent = <&gpx3>; + interrupts = <2 0>; + pinctrl-names = "default"; + pinctrl-0 = <&max77686_irq>; + wakeup-source; reg = <0x09>; voltage-regulators { -- 1.8.3.2