From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1760247Ab3LFXaD (ORCPT ); Fri, 6 Dec 2013 18:30:03 -0500 Received: from youngberry.canonical.com ([91.189.89.112]:48941 "EHLO youngberry.canonical.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754059Ab3LFXUZ (ORCPT ); Fri, 6 Dec 2013 18:20:25 -0500 From: Kamal Mostafa To: linux-kernel@vger.kernel.org, stable@vger.kernel.org, kernel-team@lists.ubuntu.com Cc: Ujjal Roy , Amitkumar Karwar , Bing Zhao , "John W. Linville" , Kamal Mostafa Subject: [PATCH 3.8 094/152] mwifiex: fix wrong eth_hdr usage for bridged packets in AP mode Date: Fri, 6 Dec 2013 15:10:18 -0800 Message-Id: <1386371476-2477-95-git-send-email-kamal@canonical.com> X-Mailer: git-send-email 1.8.3.2 In-Reply-To: <1386371476-2477-1-git-send-email-kamal@canonical.com> References: <1386371476-2477-1-git-send-email-kamal@canonical.com> X-Extended-Stable: 3.8 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org 3.8.13.14 -stable review patch. If anyone has any objections, please let me know. ------------------ From: Ujjal Roy commit 8d93f1f309d38b65fce0b9f0de91ba6c96990c07 upstream. The eth_hdr is never defined in this driver but it gets compiled without any warning/error because kernel has defined eth_hdr. Fix it by defining our own p_ethhdr and use it instead of eth_hdr. Signed-off-by: Ujjal Roy Signed-off-by: Amitkumar Karwar Signed-off-by: Bing Zhao Signed-off-by: John W. Linville Signed-off-by: Kamal Mostafa --- drivers/net/wireless/mwifiex/uap_txrx.c | 29 ++++++++++++++++++++++++++--- 1 file changed, 26 insertions(+), 3 deletions(-) diff --git a/drivers/net/wireless/mwifiex/uap_txrx.c b/drivers/net/wireless/mwifiex/uap_txrx.c index a018e42..48e6724 100644 --- a/drivers/net/wireless/mwifiex/uap_txrx.c +++ b/drivers/net/wireless/mwifiex/uap_txrx.c @@ -34,6 +34,7 @@ static void mwifiex_uap_queue_bridged_pkt(struct mwifiex_private *priv, struct mwifiex_txinfo *tx_info; int hdr_chop; struct timeval tv; + struct ethhdr *p_ethhdr; u8 rfc1042_eth_hdr[ETH_ALEN] = { 0xaa, 0xaa, 0x03, 0x00, 0x00, 0x00 }; uap_rx_pd = (struct uap_rxpd *)(skb->data); @@ -48,14 +49,36 @@ static void mwifiex_uap_queue_bridged_pkt(struct mwifiex_private *priv, } if (!memcmp(&rx_pkt_hdr->rfc1042_hdr, - rfc1042_eth_hdr, sizeof(rfc1042_eth_hdr))) + rfc1042_eth_hdr, sizeof(rfc1042_eth_hdr))) { + /* Replace the 803 header and rfc1042 header (llc/snap) with + * an Ethernet II header, keep the src/dst and snap_type + * (ethertype). + * + * The firmware only passes up SNAP frames converting all RX + * data from 802.11 to 802.2/LLC/SNAP frames. + * + * To create the Ethernet II, just move the src, dst address + * right before the snap_type. + */ + p_ethhdr = (struct ethhdr *) + ((u8 *)(&rx_pkt_hdr->eth803_hdr) + + sizeof(rx_pkt_hdr->eth803_hdr) + + sizeof(rx_pkt_hdr->rfc1042_hdr) + - sizeof(rx_pkt_hdr->eth803_hdr.h_dest) + - sizeof(rx_pkt_hdr->eth803_hdr.h_source) + - sizeof(rx_pkt_hdr->rfc1042_hdr.snap_type)); + memcpy(p_ethhdr->h_source, rx_pkt_hdr->eth803_hdr.h_source, + sizeof(p_ethhdr->h_source)); + memcpy(p_ethhdr->h_dest, rx_pkt_hdr->eth803_hdr.h_dest, + sizeof(p_ethhdr->h_dest)); /* Chop off the rxpd + the excess memory from * 802.2/llc/snap header that was removed. */ - hdr_chop = (u8 *)eth_hdr - (u8 *)uap_rx_pd; - else + hdr_chop = (u8 *)p_ethhdr - (u8 *)uap_rx_pd; + } else { /* Chop off the rxpd */ hdr_chop = (u8 *)&rx_pkt_hdr->eth803_hdr - (u8 *)uap_rx_pd; + } /* Chop off the leading header bytes so the it points * to the start of either the reconstructed EthII frame -- 1.8.3.2