From: Gary Rookard <garyrookard@gmail.com>
To: gregkh@linuxfoundation.org
Cc: lisa@xenapiadmin.com, devel@driverdev.osuosl.org,
linux-kernel@vger.kernel.org,
Gary Rookard <garyrookard@gmail.com>
Subject: [PATCH 9/9] Staging: bcm: DDRInit: removed space from front of semicolon.
Date: Sat, 7 Dec 2013 00:02:45 -0500 [thread overview]
Message-ID: <1386392565-11991-1-git-send-email-garyrookard@gmail.com> (raw)
This is the ninth patch of a series.
Signed-off-by: Gary Alan Rookard <garyrookard@gmail.com>
---
On branch staging-next
drivers/staging/bcm/DDRInit.c | 30 +++++++++++++++---------------
1 file changed, 15 insertions(+), 15 deletions(-)
diff --git a/drivers/staging/bcm/DDRInit.c b/drivers/staging/bcm/DDRInit.c
index c808bc5..1b73819 100644
--- a/drivers/staging/bcm/DDRInit.c
+++ b/drivers/staging/bcm/DDRInit.c
@@ -3,7 +3,7 @@
#define DDR_DUMP_INTERNAL_DEVICE_MEMORY 0xBFC02B00
-#define MIPS_CLOCK_REG 0x0f000820
+#define MIPS_CLOCK_REG 0x0f000820
/* DDR INIT-133Mhz */
#define T3_SKIP_CLOCK_PROGRAM_DUMP_133MHZ 12 /* index for 0x0F007000 */
@@ -1005,20 +1005,20 @@ int download_ddr_settings(struct bcm_mini_adapter *Adapter)
case DDR_80_MHZ:
psDDRSetting = asT3LP_DDRSetting80MHz;
RegCount = ARRAY_SIZE(asT3LP_DDRSetting80MHz);
- RegCount -= T3LP_SKIP_CLOCK_PROGRAM_DUMP_80MHZ ;
+ RegCount -= T3LP_SKIP_CLOCK_PROGRAM_DUMP_80MHZ;
psDDRSetting += T3LP_SKIP_CLOCK_PROGRAM_DUMP_80MHZ;
break;
case DDR_100_MHZ:
psDDRSetting = asT3LP_DDRSetting100MHz;
RegCount = ARRAY_SIZE(asT3LP_DDRSetting100MHz);
- RegCount -= T3LP_SKIP_CLOCK_PROGRAM_DUMP_100MHZ ;
+ RegCount -= T3LP_SKIP_CLOCK_PROGRAM_DUMP_100MHZ;
psDDRSetting += T3LP_SKIP_CLOCK_PROGRAM_DUMP_100MHZ;
break;
case DDR_133_MHZ:
bOverrideSelfRefresh = TRUE;
psDDRSetting = asT3LP_DDRSetting133MHz;
RegCount = ARRAY_SIZE(asT3LP_DDRSetting133MHz);
- RegCount -= T3LP_SKIP_CLOCK_PROGRAM_DUMP_133MHZ ;
+ RegCount -= T3LP_SKIP_CLOCK_PROGRAM_DUMP_133MHZ;
psDDRSetting += T3LP_SKIP_CLOCK_PROGRAM_DUMP_133MHZ;
break;
default:
@@ -1034,20 +1034,20 @@ int download_ddr_settings(struct bcm_mini_adapter *Adapter)
case DDR_80_MHZ:
psDDRSetting = asT3LPB_DDRSetting80MHz;
RegCount = ARRAY_SIZE(asT3LPB_DDRSetting80MHz);
- RegCount -= T3LPB_SKIP_CLOCK_PROGRAM_DUMP_80MHZ ;
+ RegCount -= T3LPB_SKIP_CLOCK_PROGRAM_DUMP_80MHZ;
psDDRSetting += T3LPB_SKIP_CLOCK_PROGRAM_DUMP_80MHZ;
break;
case DDR_100_MHZ:
psDDRSetting = asT3LPB_DDRSetting100MHz;
RegCount = ARRAY_SIZE(asT3LPB_DDRSetting100MHz);
- RegCount -= T3LPB_SKIP_CLOCK_PROGRAM_DUMP_100MHZ ;
+ RegCount -= T3LPB_SKIP_CLOCK_PROGRAM_DUMP_100MHZ;
psDDRSetting += T3LPB_SKIP_CLOCK_PROGRAM_DUMP_100MHZ;
break;
case DDR_133_MHZ:
bOverrideSelfRefresh = TRUE;
psDDRSetting = asT3LPB_DDRSetting133MHz;
RegCount = ARRAY_SIZE(asT3LPB_DDRSetting133MHz);
- RegCount -= T3LPB_SKIP_CLOCK_PROGRAM_DUMP_133MHZ ;
+ RegCount -= T3LPB_SKIP_CLOCK_PROGRAM_DUMP_133MHZ;
psDDRSetting += T3LPB_SKIP_CLOCK_PROGRAM_DUMP_133MHZ;
break;
case DDR_160_MHZ:
@@ -1066,20 +1066,20 @@ int download_ddr_settings(struct bcm_mini_adapter *Adapter)
case DDR_80_MHZ:
psDDRSetting = asT3_DDRSetting80MHz;
RegCount = ARRAY_SIZE(asT3_DDRSetting80MHz);
- RegCount -= T3_SKIP_CLOCK_PROGRAM_DUMP_80MHZ ;
+ RegCount -= T3_SKIP_CLOCK_PROGRAM_DUMP_80MHZ;
psDDRSetting += T3_SKIP_CLOCK_PROGRAM_DUMP_80MHZ;
break;
case DDR_100_MHZ:
psDDRSetting = asT3_DDRSetting100MHz;
RegCount = ARRAY_SIZE(asT3_DDRSetting100MHz);
- RegCount -= T3_SKIP_CLOCK_PROGRAM_DUMP_100MHZ ;
+ RegCount -= T3_SKIP_CLOCK_PROGRAM_DUMP_100MHZ;
psDDRSetting += T3_SKIP_CLOCK_PROGRAM_DUMP_100MHZ;
break;
case DDR_133_MHZ:
psDDRSetting = asT3_DDRSetting133MHz;
RegCount = ARRAY_SIZE(asT3_DDRSetting133MHz);
- RegCount -= T3_SKIP_CLOCK_PROGRAM_DUMP_133MHZ ;
- psDDRSetting += T3_SKIP_CLOCK_PROGRAM_DUMP_133MHZ ;
+ RegCount -= T3_SKIP_CLOCK_PROGRAM_DUMP_133MHZ;
+ psDDRSetting += T3_SKIP_CLOCK_PROGRAM_DUMP_133MHZ;
break;
default:
return -EINVAL;
@@ -1090,20 +1090,20 @@ int download_ddr_settings(struct bcm_mini_adapter *Adapter)
case DDR_80_MHZ:
psDDRSetting = asT3B_DDRSetting80MHz;
RegCount = ARRAY_SIZE(asT3B_DDRSetting80MHz);
- RegCount -= T3B_SKIP_CLOCK_PROGRAM_DUMP_80MHZ ;
+ RegCount -= T3B_SKIP_CLOCK_PROGRAM_DUMP_80MHZ;
psDDRSetting += T3B_SKIP_CLOCK_PROGRAM_DUMP_80MHZ;
break;
case DDR_100_MHZ:
psDDRSetting = asT3B_DDRSetting100MHz;
RegCount = ARRAY_SIZE(asT3B_DDRSetting100MHz);
- RegCount -= T3B_SKIP_CLOCK_PROGRAM_DUMP_100MHZ ;
+ RegCount -= T3B_SKIP_CLOCK_PROGRAM_DUMP_100MHZ;
psDDRSetting += T3B_SKIP_CLOCK_PROGRAM_DUMP_100MHZ;
break;
case DDR_133_MHZ:
bOverrideSelfRefresh = TRUE;
psDDRSetting = asT3B_DDRSetting133MHz;
RegCount = ARRAY_SIZE(asT3B_DDRSetting133MHz);
- RegCount -= T3B_SKIP_CLOCK_PROGRAM_DUMP_133MHZ ;
+ RegCount -= T3B_SKIP_CLOCK_PROGRAM_DUMP_133MHZ;
psDDRSetting += T3B_SKIP_CLOCK_PROGRAM_DUMP_133MHZ;
break;
}
@@ -1130,7 +1130,7 @@ int download_ddr_settings(struct bcm_mini_adapter *Adapter)
ul_ddr_setting_load_addr += sizeof(ULONG);
RegCount *= (sizeof(struct bcm_ddr_setting)/sizeof(ULONG));
while (RegCount && !retval) {
- value = psDDRSetting->ulRegAddress ;
+ value = psDDRSetting->ulRegAddress;
retval = wrmalt(Adapter, ul_ddr_setting_load_addr, &value, sizeof(value));
ul_ddr_setting_load_addr += sizeof(ULONG);
if (!retval) {
--
1.8.4
reply other threads:[~2013-12-07 5:02 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1386392565-11991-1-git-send-email-garyrookard@gmail.com \
--to=garyrookard@gmail.com \
--cc=devel@driverdev.osuosl.org \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=lisa@xenapiadmin.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®