From: Michael Opdenacker <michael.opdenacker@free-electrons.com>
To: kaloz@openwrt.org, khc@pm.waw.pl, linux@arm.linux.org.uk
Cc: linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org,
Michael Opdenacker <michael.opdenacker@free-electrons.com>
Subject: [PATCH][RESEND] ARM: IXP4xx: remove deprecated IRQF_DISABLED
Date: Mon, 9 Dec 2013 05:52:24 +0100 [thread overview]
Message-ID: <1386564744-19065-1-git-send-email-michael.opdenacker@free-electrons.com> (raw)
In-Reply-To: <1381547864-4970-1-git-send-email-michael.opdenacker@free-electrons.com>
This patch proposes to remove the use of the IRQF_DISABLED flag
It's a NOOP since 2.6.35 and it will be removed one day.
Signed-off-by: Michael Opdenacker <michael.opdenacker@free-electrons.com>
---
arch/arm/mach-ixp4xx/common.c | 2 +-
arch/arm/mach-ixp4xx/dsmg600-setup.c | 3 +--
arch/arm/mach-ixp4xx/fsg-setup.c | 6 ++----
arch/arm/mach-ixp4xx/nas100d-setup.c | 3 +--
arch/arm/mach-ixp4xx/nslu2-setup.c | 6 ++----
5 files changed, 7 insertions(+), 13 deletions(-)
diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c
index 9edaf4734fa8..340b2c9c51f4 100644
--- a/arch/arm/mach-ixp4xx/common.c
+++ b/arch/arm/mach-ixp4xx/common.c
@@ -312,7 +312,7 @@ static irqreturn_t ixp4xx_timer_interrupt(int irq, void *dev_id)
static struct irqaction ixp4xx_timer_irq = {
.name = "timer1",
- .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+ .flags = IRQF_TIMER | IRQF_IRQPOLL,
.handler = ixp4xx_timer_interrupt,
.dev_id = &clockevent_ixp4xx,
};
diff --git a/arch/arm/mach-ixp4xx/dsmg600-setup.c b/arch/arm/mach-ixp4xx/dsmg600-setup.c
index 736dc692d540..43ee06d3abe5 100644
--- a/arch/arm/mach-ixp4xx/dsmg600-setup.c
+++ b/arch/arm/mach-ixp4xx/dsmg600-setup.c
@@ -233,8 +233,7 @@ static int __init dsmg600_gpio_init(void)
gpio_request(DSMG600_RB_GPIO, "reset button");
if (request_irq(gpio_to_irq(DSMG600_RB_GPIO), &dsmg600_reset_handler,
- IRQF_DISABLED | IRQF_TRIGGER_LOW,
- "DSM-G600 reset button", NULL) < 0) {
+ IRQF_TRIGGER_LOW, "DSM-G600 reset button", NULL) < 0) {
printk(KERN_DEBUG "Reset Button IRQ %d not available\n",
gpio_to_irq(DSMG600_RB_GPIO));
diff --git a/arch/arm/mach-ixp4xx/fsg-setup.c b/arch/arm/mach-ixp4xx/fsg-setup.c
index 429966b756ed..5c4b0c4a1b37 100644
--- a/arch/arm/mach-ixp4xx/fsg-setup.c
+++ b/arch/arm/mach-ixp4xx/fsg-setup.c
@@ -208,16 +208,14 @@ static void __init fsg_init(void)
platform_add_devices(fsg_devices, ARRAY_SIZE(fsg_devices));
if (request_irq(gpio_to_irq(FSG_RB_GPIO), &fsg_reset_handler,
- IRQF_DISABLED | IRQF_TRIGGER_LOW,
- "FSG reset button", NULL) < 0) {
+ IRQF_TRIGGER_LOW, "FSG reset button", NULL) < 0) {
printk(KERN_DEBUG "Reset Button IRQ %d not available\n",
gpio_to_irq(FSG_RB_GPIO));
}
if (request_irq(gpio_to_irq(FSG_SB_GPIO), &fsg_power_handler,
- IRQF_DISABLED | IRQF_TRIGGER_LOW,
- "FSG power button", NULL) < 0) {
+ IRQF_TRIGGER_LOW, "FSG power button", NULL) < 0) {
printk(KERN_DEBUG "Power Button IRQ %d not available\n",
gpio_to_irq(FSG_SB_GPIO));
diff --git a/arch/arm/mach-ixp4xx/nas100d-setup.c b/arch/arm/mach-ixp4xx/nas100d-setup.c
index 507cb5233537..4e0f762bc651 100644
--- a/arch/arm/mach-ixp4xx/nas100d-setup.c
+++ b/arch/arm/mach-ixp4xx/nas100d-setup.c
@@ -295,8 +295,7 @@ static void __init nas100d_init(void)
pm_power_off = nas100d_power_off;
if (request_irq(gpio_to_irq(NAS100D_RB_GPIO), &nas100d_reset_handler,
- IRQF_DISABLED | IRQF_TRIGGER_LOW,
- "NAS100D reset button", NULL) < 0) {
+ IRQF_TRIGGER_LOW, "NAS100D reset button", NULL) < 0) {
printk(KERN_DEBUG "Reset Button IRQ %d not available\n",
gpio_to_irq(NAS100D_RB_GPIO));
diff --git a/arch/arm/mach-ixp4xx/nslu2-setup.c b/arch/arm/mach-ixp4xx/nslu2-setup.c
index ba5f1cda2a9d..88c025f52d8d 100644
--- a/arch/arm/mach-ixp4xx/nslu2-setup.c
+++ b/arch/arm/mach-ixp4xx/nslu2-setup.c
@@ -265,16 +265,14 @@ static void __init nslu2_init(void)
pm_power_off = nslu2_power_off;
if (request_irq(gpio_to_irq(NSLU2_RB_GPIO), &nslu2_reset_handler,
- IRQF_DISABLED | IRQF_TRIGGER_LOW,
- "NSLU2 reset button", NULL) < 0) {
+ IRQF_TRIGGER_LOW, "NSLU2 reset button", NULL) < 0) {
printk(KERN_DEBUG "Reset Button IRQ %d not available\n",
gpio_to_irq(NSLU2_RB_GPIO));
}
if (request_irq(gpio_to_irq(NSLU2_PB_GPIO), &nslu2_power_handler,
- IRQF_DISABLED | IRQF_TRIGGER_HIGH,
- "NSLU2 power button", NULL) < 0) {
+ IRQF_TRIGGER_HIGH, "NSLU2 power button", NULL) < 0) {
printk(KERN_DEBUG "Power Button IRQ %d not available\n",
gpio_to_irq(NSLU2_PB_GPIO));
--
1.8.3.2
prev parent reply other threads:[~2013-12-09 4:52 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-10-12 3:17 [PATCH] " Michael Opdenacker
2013-12-09 4:52 ` Michael Opdenacker [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1386564744-19065-1-git-send-email-michael.opdenacker@free-electrons.com \
--to=michael.opdenacker@free-electrons.com \
--cc=kaloz@openwrt.org \
--cc=khc@pm.waw.pl \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@arm.linux.org.uk \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®