From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1761251Ab3LIPXO (ORCPT ); Mon, 9 Dec 2013 10:23:14 -0500 Received: from eusmtp01.atmel.com ([212.144.249.243]:28122 "EHLO eusmtp01.atmel.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1761195Ab3LIPXI (ORCPT ); Mon, 9 Dec 2013 10:23:08 -0500 From: Nicolas Ferre To: Arnd Bergmann , Olof Johansson , CC: Nicolas Ferre , Linux Kernel list , linux-arm-kernel , Jean-Christophe PLAGNIOL-VILLARD , Ludovic Desroches Subject: [GIT PULL] at91: dt for 3.14 #1 Date: Mon, 9 Dec 2013 16:23:05 +0100 Message-ID: <1386602585-1927-1-git-send-email-nicolas.ferre@atmel.com> X-Mailer: git-send-email 1.8.2.2 Organization: atmel MIME-Version: 1.0 Content-Type: text/plain Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Arnd, Olof, Kevin, First pull-request focusing on DT material for AT91 on 3.14. This one is also based on the "cleanup" material already in arm-soc tree (at91/sama5-ccf) like all other AT91 pull-requests for 3.14. Thanks, best regards, The following changes since commit b46e837d8ef1f3c777bbf9513e2cdb5d87d6c374: ARM: at91/dt: remove old clk material (2013-12-02 15:31:29 +0100) are available in the git repository at: git://github.com/at91linux/linux-at91.git tags/at91-dt for you to fetch changes up to ca594844e4a53f778811c06feef60bdf36bc5fec: ARM: at91/at91rm9200ek.dts: rearrange nodes in address ascending order (2013-12-09 15:08:57 +0100) ---------------------------------------------------------------- First DT pull-request for 3.14 - many little corrections and documentation updates - LCD FB Device Tree for at91sam9263 and at91sam9g45 boards - crypto peripherals DT entries + DMA specification - new Cosino board ---------------------------------------------------------------- Bo Shen (1): ARM: at91: sama5d3: enable qt1070 as a wakeup source Boris BREZILLON (2): ARM: at91/dt: add ethernet phy to at91rm9200ek board ARM: at91/dt: add atmel,pullup-gpio to at91rm9200ek usb1 definition Jean-Christophe PLAGNIOL-VILLARD (6): ARM: at91: sam9g45: add fb dt support ARM: at91: sam9263: add fb dt support ARM: at91: at9sam9m10g45ek: add dt lcd support ARM: at91: sam9263ek: add dt lcd support ARM: at91: Animeo IP: fix mtd partition table ARM: at91: dt: at91rm9200ek: add emac and nor flash support Ludovic Desroches (2): ARM: at91: at91sam9g45: set default mmc pinctrl-names ARM: at91: at91sam9g45: add i2c pinctrl Nicolas Ferre (9): ARM: at91/trivial: fix at91rm9200 rts/cts pinctrl definitions ARM: at91/dt: binding: add precision to AIC documentation ARM: at91/dt: binding: add missing compatibility string in SDRAM/DDR documentation ARM: at91/dt/trivial: use macro for AES irq type ARM: at91/dt/trivial: before sama5d3, Atmel MPU were using at91 prefix ARM: at91/dt/sama5d3: add DMA information to SHA/AES/TDES nodes ARM: at91: add i2c2 pinctrl speficifation to sama5d3 DT ARM: at91: add uart aliases to sama5d3 dtsi ARM: at91/at91rm9200ek.dts: rearrange nodes in address ascending order Rodolfo Giometti (1): ARM: at91: add support for Cosino board series by HCE Engineering .../devicetree/bindings/arm/atmel-aic.txt | 1 + .../devicetree/bindings/arm/atmel-at91.txt | 3 +- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/animeo_ip.dts | 31 ++---- arch/arm/boot/dts/at91-cosino.dtsi | 122 +++++++++++++++++++++ arch/arm/boot/dts/at91-cosino_mega2560.dts | 84 ++++++++++++++ arch/arm/boot/dts/at91rm9200.dtsi | 4 +- arch/arm/boot/dts/at91rm9200ek.dts | 57 ++++++++-- arch/arm/boot/dts/at91sam9263.dtsi | 37 +++++++ arch/arm/boot/dts/at91sam9263ek.dts | 30 +++++ arch/arm/boot/dts/at91sam9g45.dtsi | 67 +++++++++++ arch/arm/boot/dts/at91sam9m10g45ek.dts | 29 +++++ arch/arm/boot/dts/sama5d3.dtsi | 26 ++++- arch/arm/boot/dts/sama5d3_uart.dtsi | 5 + arch/arm/boot/dts/sama5d3xdm.dtsi | 1 + 15 files changed, 457 insertions(+), 41 deletions(-) create mode 100644 arch/arm/boot/dts/at91-cosino.dtsi create mode 100644 arch/arm/boot/dts/at91-cosino_mega2560.dts -- Nicolas Ferre