From: Roger Quadros <rogerq@ti.com>
To: <dmitry.torokhov@gmail.com>
Cc: <rydberg@euromail.se>, <jcbian@pixcir.com.cn>,
<linux-input@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<devicetree@vger.kernel.org>, Roger Quadros <rogerq@ti.com>
Subject: [PATCH 5/9] Input: pixcir_i2c_ts: Get rid of pdata->attb_read_val()
Date: Wed, 18 Dec 2013 14:51:16 +0530 [thread overview]
Message-ID: <1387358480-8313-6-git-send-email-rogerq@ti.com> (raw)
In-Reply-To: <1387358480-8313-1-git-send-email-rogerq@ti.com>
Get rid of the attb_read_val() platform hook. Instead,
read the ATTB gpio directly from the driver.
Fail if valid ATTB gpio is not provided by patform data.
Signed-off-by: Roger Quadros <rogerq@ti.com>
Acked-by: Mugunthan V N <mugunthanvnm@ti.com>
---
drivers/input/touchscreen/pixcir_i2c_ts.c | 19 +++++++++++++++++--
include/linux/input/pixcir_ts.h | 1 -
2 files changed, 17 insertions(+), 3 deletions(-)
diff --git a/drivers/input/touchscreen/pixcir_i2c_ts.c b/drivers/input/touchscreen/pixcir_i2c_ts.c
index 3370fd9..a783d94 100644
--- a/drivers/input/touchscreen/pixcir_i2c_ts.c
+++ b/drivers/input/touchscreen/pixcir_i2c_ts.c
@@ -91,11 +91,12 @@ static void pixcir_ts_poscheck(struct pixcir_i2c_ts_data *data)
static irqreturn_t pixcir_ts_isr(int irq, void *dev_id)
{
struct pixcir_i2c_ts_data *tsdata = dev_id;
+ const struct pixcir_ts_platform_data *pdata = tsdata->chip;
while (!tsdata->exiting) {
pixcir_ts_poscheck(tsdata);
- if (tsdata->chip->attb_read_val())
+ if (gpio_get_value(pdata->gpio_attb))
break;
msleep(20);
@@ -301,8 +302,10 @@ static struct pixcir_ts_platform_data *pixcir_parse_dt(struct device *dev)
return ERR_PTR(-ENOMEM);
pdata->gpio_attb = of_get_named_gpio(np, "attb-gpio", 0);
- if (!gpio_is_valid(pdata->gpio_attb))
+ if (!gpio_is_valid(pdata->gpio_attb)) {
dev_err(dev, "Failed to get ATTB GPIO\n");
+ return ERR_PTR(-EINVAL);
+ }
if (of_property_read_u32(np, "x-size", &pdata->x_size)) {
dev_err(dev, "Failed to get x-size property\n");
@@ -344,6 +347,11 @@ static int pixcir_i2c_ts_probe(struct i2c_client *client,
} else if (!pdata) {
dev_err(&client->dev, "platform data not defined\n");
return -EINVAL;
+ } else {
+ if (!gpio_is_valid(pdata->gpio_attb)) {
+ dev_err(dev, "Invalid gpio_attb in pdata\n");
+ return -EINVAL;
+ }
}
tsdata = devm_kzalloc(dev, sizeof(*tsdata), GFP_KERNEL);
@@ -380,6 +388,13 @@ static int pixcir_i2c_ts_probe(struct i2c_client *client,
input_set_drvdata(input, tsdata);
+ error = devm_gpio_request_one(dev, pdata->gpio_attb,
+ GPIOF_DIR_IN, "pixcir_i2c_attb");
+ if (error) {
+ dev_err(dev, "Failed to request ATTB gpio\n");
+ return error;
+ }
+
error = devm_request_threaded_irq(dev, client->irq, NULL, pixcir_ts_isr,
IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
client->name, tsdata);
diff --git a/include/linux/input/pixcir_ts.h b/include/linux/input/pixcir_ts.h
index f17c192..88ffdb50 100644
--- a/include/linux/input/pixcir_ts.h
+++ b/include/linux/input/pixcir_ts.h
@@ -44,7 +44,6 @@ enum pixcir_int_mode {
#define PIXCIR_INT_POL_HIGH (1UL << 2)
struct pixcir_ts_platform_data {
- int (*attb_read_val)(void);
unsigned int x_size; /* X axis resolution */
unsigned int y_size; /* Y axis resolution */
int gpio_attb; /* GPIO connected to ATTB line */
--
1.8.3.2
next prev parent reply other threads:[~2013-12-18 9:22 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-12-18 9:21 [PATCH 0/9] Input: pixcir_i2c_ts: Add Type-B Multitouch support Roger Quadros
2013-12-18 9:21 ` [PATCH 1/9] Input: pixcir_i2c_ts: Add device tree support Roger Quadros
2013-12-18 14:09 ` Dmitry Torokhov
2013-12-19 6:12 ` Roger Quadros
2013-12-18 9:21 ` [PATCH 2/9] Input: pixcir_i2c_ts: Add register definitions Roger Quadros
2013-12-18 14:09 ` Dmitry Torokhov
2013-12-18 9:21 ` [PATCH 3/9] Input: pixcir_i2c_ts: Initialize interrupt mode and power mode Roger Quadros
2013-12-18 14:14 ` Dmitry Torokhov
2013-12-19 5:57 ` Roger Quadros
2013-12-18 9:21 ` [PATCH 4/9] Input: pixcir_i2c_ts: Use devres managed resource allocations Roger Quadros
2013-12-18 14:15 ` Dmitry Torokhov
2013-12-18 9:21 ` Roger Quadros [this message]
2013-12-18 14:20 ` [PATCH 5/9] Input: pixcir_i2c_ts: Get rid of pdata->attb_read_val() Dmitry Torokhov
2013-12-19 5:54 ` Roger Quadros
2013-12-18 9:21 ` [PATCH 6/9] Input: pixcir_i2c_ts: Add chip specific data structure Roger Quadros
2013-12-18 9:21 ` [PATCH 7/9] Input: pixcir_i2c_ts: Implement Type B Multi Touch reporting Roger Quadros
2013-12-18 14:18 ` Dmitry Torokhov
2013-12-19 5:49 ` Roger Quadros
2013-12-21 20:02 ` Henrik Rydberg
2013-12-18 9:21 ` [PATCH 8/9] Input: pixcir_i2c_ts: Add support for TangoC family Roger Quadros
2013-12-18 9:21 ` [PATCH 9/9] Input: pixcir_i2c_ts: Implement wakeup from suspend Roger Quadros
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1387358480-8313-6-git-send-email-rogerq@ti.com \
--to=rogerq@ti.com \
--cc=devicetree@vger.kernel.org \
--cc=dmitry.torokhov@gmail.com \
--cc=jcbian@pixcir.com.cn \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=rydberg@euromail.se \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®