From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1755810Ab3LSMbK (ORCPT ); Thu, 19 Dec 2013 07:31:10 -0500 Received: from youngberry.canonical.com ([91.189.89.112]:44970 "EHLO youngberry.canonical.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753223Ab3LSL6C (ORCPT ); Thu, 19 Dec 2013 06:58:02 -0500 From: Luis Henriques To: linux-kernel@vger.kernel.org, stable@vger.kernel.org, kernel-team@lists.ubuntu.com Cc: Arnaud Ebalard , Jason Cooper , Luis Henriques Subject: [PATCH 3.11 113/208] ARM: mvebu: second PCIe unit of Armada XP mv78230 is only x1 capable Date: Thu, 19 Dec 2013 11:53:31 +0000 Message-Id: <1387454106-19326-114-git-send-email-luis.henriques@canonical.com> X-Mailer: git-send-email 1.8.3.2 In-Reply-To: <1387454106-19326-1-git-send-email-luis.henriques@canonical.com> References: <1387454106-19326-1-git-send-email-luis.henriques@canonical.com> X-Extended-Stable: 3.11 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org 3.11.10.2 -stable review patch. If anyone has any objections, please let me know. ------------------ From: Arnaud Ebalard commit 12b69a599745fc9e203f61fbb7160b2cc5f479dd upstream. Various Marvell datasheets advertise second PCIe unit of mv78230 flavour of Armada XP as x4/quad x1 capable. This second unit is in fact only x1 capable. This patch fixes current mv78230 .dtsi to reflect that, i.e. makes 1.0 the second interface (instead of 2.0 at the moment). This was successfully tested on a mv78230-based ReadyNAS 2120 platform with a x1 device (FL1009 XHCI controller) connected to this second interface. Signed-off-by: Arnaud Ebalard Acked-by: Thomas Petazzoni Signed-off-by: Jason Cooper Signed-off-by: Luis Henriques --- arch/arm/boot/dts/armada-xp-mv78230.dtsi | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/arch/arm/boot/dts/armada-xp-mv78230.dtsi b/arch/arm/boot/dts/armada-xp-mv78230.dtsi index f8eaa38..f94cdbc 100644 --- a/arch/arm/boot/dts/armada-xp-mv78230.dtsi +++ b/arch/arm/boot/dts/armada-xp-mv78230.dtsi @@ -81,7 +81,7 @@ /* * MV78230 has 2 PCIe units Gen2.0: One unit can be * configured as x4 or quad x1 lanes. One unit is - * x4/x1. + * x1 only. */ pcie-controller { compatible = "marvell,armada-xp-pcie"; @@ -94,10 +94,10 @@ bus-range = <0x00 0xff>; ranges = <0x82000000 0 0x40000 0x40000 0 0x00002000 /* Port 0.0 registers */ - 0x82000000 0 0x42000 0x42000 0 0x00002000 /* Port 2.0 registers */ 0x82000000 0 0x44000 0x44000 0 0x00002000 /* Port 0.1 registers */ 0x82000000 0 0x48000 0x48000 0 0x00002000 /* Port 0.2 registers */ 0x82000000 0 0x4c000 0x4c000 0 0x00002000 /* Port 0.3 registers */ + 0x82000000 0 0x80000 0x80000 0 0x00002000 /* Port 1.0 registers */ 0x82000000 0 0xe0000000 0xe0000000 0 0x08000000 /* non-prefetchable memory */ 0x81000000 0 0 0xe8000000 0 0x00100000>; /* downstream I/O */ @@ -165,19 +165,19 @@ status = "disabled"; }; - pcie@9,0 { + pcie@5,0 { device_type = "pci"; - assigned-addresses = <0x82000800 0 0x42000 0 0x2000>; - reg = <0x4800 0 0 0 0>; + assigned-addresses = <0x82000800 0 0x80000 0 0x2000>; + reg = <0x2800 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; #interrupt-cells = <1>; ranges; interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 99>; - marvell,pcie-port = <2>; + interrupt-map = <0 0 0 0 &mpic 62>; + marvell,pcie-port = <1>; marvell,pcie-lane = <0>; - clocks = <&gateclk 26>; + clocks = <&gateclk 9>; status = "disabled"; }; }; -- 1.8.3.2