From: Chen-Yu Tsai <wens@csie.org>
To: Srinivas Kandagatla <srinivas.kandagatla@st.com>,
Giuseppe Cavallaro <peppe.cavallaro@st.com>,
Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: Chen-Yu Tsai <wens@csie.org>,
netdev@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-sunxi@googlegroups.com, linux-kernel@vger.kernel.org,
Rob Herring <rob.herring@calxeda.com>,
Emilio Lopez <emilio@elopez.com.ar>,
Mike Turquette <mturquette@linaro.org>
Subject: [PATCH v2 07/16] net: stmmac: Use driver data and callbacks tied with compatible strings
Date: Fri, 10 Jan 2014 15:00:08 +0800 [thread overview]
Message-ID: <1389337217-29032-8-git-send-email-wens@csie.org> (raw)
In-Reply-To: <1389337217-29032-1-git-send-email-wens@csie.org>
The stmmac driver core allows passing feature flags and callbacks via
platform data. Add a similar stmmac_of_data to pass flags and callbacks
tied to compatible strings. This allows us to extend stmmac with glue
layers for different SoCs.
Also deprecate device tree "snps,phy-addr" property, and default to PHY
address auto-detection.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
---
.../net/ethernet/stmicro/stmmac/stmmac_platform.c | 46 +++++++++++++++++-----
include/linux/stmmac.h | 18 +++++++++
2 files changed, 54 insertions(+), 10 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
index 92627e0..2e554e3 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
@@ -26,8 +26,20 @@
#include <linux/io.h>
#include <linux/of.h>
#include <linux/of_net.h>
+#include <linux/of_device.h>
#include "stmmac.h"
+static const struct of_device_id stmmac_dt_ids[] = {
+ /* SoC specific glue layers should come before generic bindings */
+ { .compatible = "st,spear600-gmac"},
+ { .compatible = "snps,dwmac-3.610"},
+ { .compatible = "snps,dwmac-3.70a"},
+ { .compatible = "snps,dwmac-3.710"},
+ { .compatible = "snps,dwmac"},
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, stmmac_dt_ids);
+
#ifdef CONFIG_OF
static int stmmac_probe_config_dt(struct platform_device *pdev,
struct plat_stmmacenet_data *plat,
@@ -35,10 +47,32 @@ static int stmmac_probe_config_dt(struct platform_device *pdev,
{
struct device_node *np = pdev->dev.of_node;
struct stmmac_dma_cfg *dma_cfg;
+ const struct of_device_id *device;
if (!np)
return -ENODEV;
+ device = of_match_device(stmmac_dt_ids, &pdev->dev);
+ if (!device)
+ return -ENODEV;
+
+ if (device->data) {
+ const struct stmmac_of_data *data = device->data;
+ plat->has_gmac = data->has_gmac;
+ plat->enh_desc = data->enh_desc;
+ plat->tx_coe = data->tx_coe;
+ plat->rx_coe = data->rx_coe;
+ plat->bugged_jumbo = data->bugged_jumbo;
+ plat->pmt = data->pmt;
+ plat->riwt_off = data->riwt_off;
+ plat->fix_mac_speed = data->fix_mac_speed;
+ plat->bus_setup = data->bus_setup;
+ plat->setup = data->setup;
+ plat->free = data->free;
+ plat->init = data->init;
+ plat->exit = data->exit;
+ }
+
*mac = of_get_mac_address(np);
plat->interface = of_get_phy_mode(np);
@@ -46,6 +80,8 @@ static int stmmac_probe_config_dt(struct platform_device *pdev,
if (plat->bus_id < 0)
plat->bus_id = 0;
+ /* Default to phy auto-detection */
+ plat->phy_addr = -1;
of_property_read_u32(np, "snps,phy-addr", &plat->phy_addr);
plat->mdio_bus_data = devm_kzalloc(&pdev->dev,
@@ -268,16 +304,6 @@ static const struct dev_pm_ops stmmac_pltfr_pm_ops = {
static const struct dev_pm_ops stmmac_pltfr_pm_ops;
#endif /* CONFIG_PM */
-static const struct of_device_id stmmac_dt_ids[] = {
- { .compatible = "st,spear600-gmac"},
- { .compatible = "snps,dwmac-3.610"},
- { .compatible = "snps,dwmac-3.70a"},
- { .compatible = "snps,dwmac-3.710"},
- { .compatible = "snps,dwmac"},
- { /* sentinel */ }
-};
-MODULE_DEVICE_TABLE(of, stmmac_dt_ids);
-
struct platform_driver stmmac_pltfr_driver = {
.probe = stmmac_pltfr_probe,
.remove = stmmac_pltfr_remove,
diff --git a/include/linux/stmmac.h b/include/linux/stmmac.h
index c407791..10a9e2a 100644
--- a/include/linux/stmmac.h
+++ b/include/linux/stmmac.h
@@ -120,4 +120,22 @@ struct plat_stmmacenet_data {
void *custom_data;
void *bsp_priv;
};
+
+/* of_data for SoC glue layer device tree bindings */
+
+struct stmmac_of_data {
+ int has_gmac;
+ int enh_desc;
+ int tx_coe;
+ int rx_coe;
+ int bugged_jumbo;
+ int pmt;
+ int riwt_off;
+ void (*fix_mac_speed)(void *priv, unsigned int speed);
+ void (*bus_setup)(void __iomem *ioaddr);
+ void *(*setup)(struct platform_device *pdev);
+ void (*free)(struct platform_device *pdev, void *priv);
+ int (*init)(struct platform_device *pdev, void *priv);
+ void (*exit)(struct platform_device *pdev, void *priv);
+};
#endif
--
1.8.5.2
next prev parent reply other threads:[~2014-01-10 7:02 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-01-10 7:00 [PATCH v2 00/16] net: stmmac: Add Allwinner A20 GMAC ethernet controller glue layer Chen-Yu Tsai
2014-01-10 7:00 ` [PATCH v2 01/16] reset: add non CONFIG_RESET_CONTROLLER routines Chen-Yu Tsai
2014-01-10 13:30 ` Philipp Zabel
2014-01-17 3:46 ` Chen-Yu Tsai
2014-01-10 7:00 ` [PATCH v2 02/16] net: stmmac: Enable stmmac main clock when probing hardware Chen-Yu Tsai
2014-01-10 7:00 ` [PATCH v2 03/16] net: stmmac: Add support for optional reset control Chen-Yu Tsai
2014-01-10 7:00 ` [PATCH v2 04/16] net: stmmac: Allocate and pass soc/board specific data to callbacks Chen-Yu Tsai
2014-01-10 7:00 ` [PATCH v2 05/16] blackfin: Update stmmac callback signatures Chen-Yu Tsai
2014-01-10 20:47 ` Sergei Shtylyov
2014-01-10 7:00 ` [PATCH v2 06/16] net: stmmac: Honor DT parameter to force DMA store and forward mode Chen-Yu Tsai
2014-01-10 7:00 ` Chen-Yu Tsai [this message]
2014-01-10 7:00 ` [PATCH v2 08/16] net: stmmac: sunxi platform extensions for GMAC in Allwinner A20 SoC's Chen-Yu Tsai
2014-01-10 7:00 ` [PATCH v2 09/16] clk: sunxi: Add Allwinner A20/A31 GMAC clock unit Chen-Yu Tsai
2014-01-10 7:00 ` [PATCH v2 10/16] ARM: dts: sun7i: Add GMAC clock node to sun7i DTSI Chen-Yu Tsai
2014-01-10 7:00 ` [PATCH v2 11/16] ARM: dts: sun7i: Add GMAC controller " Chen-Yu Tsai
2014-01-10 7:00 ` [PATCH v2 12/16] ARM: dts: sun7i: Add pin muxing options for the GMAC Chen-Yu Tsai
2014-01-10 7:00 ` [PATCH v2 13/16] ARM: dts: sun7i: cubietruck: Enable " Chen-Yu Tsai
2014-01-10 7:00 ` [PATCH v2 14/16] ARM: dts: sun7i: cubieboard2: Enable GMAC instead of EMAC Chen-Yu Tsai
2014-01-10 7:00 ` [PATCH v2 15/16] ARM: dts: sun7i: olinuxino-micro: " Chen-Yu Tsai
2014-01-10 7:00 ` [PATCH v2 16/16] ARM: dts: sun7i: Add ethernet alias for GMAC Chen-Yu Tsai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1389337217-29032-8-git-send-email-wens@csie.org \
--to=wens@csie.org \
--cc=emilio@elopez.com.ar \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sunxi@googlegroups.com \
--cc=maxime.ripard@free-electrons.com \
--cc=mturquette@linaro.org \
--cc=netdev@vger.kernel.org \
--cc=peppe.cavallaro@st.com \
--cc=rob.herring@calxeda.com \
--cc=srinivas.kandagatla@st.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®