From: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
To: Andrew Morton <akpm@linux-foundation.org>
Cc: Minchan Kim <minchan@kernel.org>,
Jerome Marchand <jmarchan@redhat.com>,
Nitin Gupta <ngupta@vflare.org>,
linux-kernel@vger.kernel.org,
Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Subject: [PATCHv3 2/8] zram: do not pass rw argument to __zram_make_request()
Date: Thu, 16 Jan 2014 16:12:10 +0300 [thread overview]
Message-ID: <1389877936-15543-3-git-send-email-sergey.senozhatsky@gmail.com> (raw)
In-Reply-To: <1389877936-15543-1-git-send-email-sergey.senozhatsky@gmail.com>
Do not pass rw argument down the __zram_make_request() -> zram_bvec_rw()
chain, decode it in zram_bvec_rw() instead. Besides, this is the place
where we distinguish READ and WRITE bio data directions, so account zram
RW stats here, instead of __zram_make_request(). This also allows to account
a real number of zram READ/WRITE operations, not just requests (single RW
request may cause a number of zram RW ops with separate locking,
compression/decompression, etc).
v2: do not check for READA return code. noted by Jerome Marchand.
Acked-by: Minchan Kim <minchan@kernel.org>
Acked-by: Jerome Marchand <jmarchan@redhat.com>
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
---
drivers/block/zram/zram_drv.c | 30 ++++++++++++------------------
1 file changed, 12 insertions(+), 18 deletions(-)
diff --git a/drivers/block/zram/zram_drv.c b/drivers/block/zram/zram_drv.c
index c323e05..b0bcb7e 100644
--- a/drivers/block/zram/zram_drv.c
+++ b/drivers/block/zram/zram_drv.c
@@ -533,14 +533,18 @@ out:
}
static int zram_bvec_rw(struct zram *zram, struct bio_vec *bvec, u32 index,
- int offset, struct bio *bio, int rw)
+ int offset, struct bio *bio)
{
int ret;
+ int rw = bio_data_dir(bio);
- if (rw == READ)
+ if (rw == READ) {
+ atomic64_inc(&zram->stats.num_reads);
ret = zram_bvec_read(zram, bvec, index, offset, bio);
- else
+ } else {
+ atomic64_inc(&zram->stats.num_writes);
ret = zram_bvec_write(zram, bvec, index, offset);
+ }
return ret;
}
@@ -670,22 +674,13 @@ out:
return ret;
}
-static void __zram_make_request(struct zram *zram, struct bio *bio, int rw)
+static void __zram_make_request(struct zram *zram, struct bio *bio)
{
int offset;
u32 index;
struct bio_vec bvec;
struct bvec_iter iter;
- switch (rw) {
- case READ:
- atomic64_inc(&zram->stats.num_reads);
- break;
- case WRITE:
- atomic64_inc(&zram->stats.num_writes);
- break;
- }
-
index = bio->bi_iter.bi_sector >> SECTORS_PER_PAGE_SHIFT;
offset = (bio->bi_iter.bi_sector &
(SECTORS_PER_PAGE - 1)) << SECTOR_SHIFT;
@@ -704,16 +699,15 @@ static void __zram_make_request(struct zram *zram, struct bio *bio, int rw)
bv.bv_len = max_transfer_size;
bv.bv_offset = bvec.bv_offset;
- if (zram_bvec_rw(zram, &bv, index, offset, bio, rw) < 0)
+ if (zram_bvec_rw(zram, &bv, index, offset, bio) < 0)
goto out;
bv.bv_len = bvec.bv_len - max_transfer_size;
bv.bv_offset += max_transfer_size;
- if (zram_bvec_rw(zram, &bv, index+1, 0, bio, rw) < 0)
+ if (zram_bvec_rw(zram, &bv, index + 1, 0, bio) < 0)
goto out;
} else
- if (zram_bvec_rw(zram, &bvec, index, offset, bio, rw)
- < 0)
+ if (zram_bvec_rw(zram, &bvec, index, offset, bio) < 0)
goto out;
update_position(&index, &offset, &bvec);
@@ -743,7 +737,7 @@ static void zram_make_request(struct request_queue *queue, struct bio *bio)
goto error;
}
- __zram_make_request(zram, bio, bio_data_dir(bio));
+ __zram_make_request(zram, bio);
up_read(&zram->init_lock);
return;
--
1.8.5.3.493.gb139ac2
next prev parent reply other threads:[~2014-01-16 13:15 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-01-16 13:12 [PATCHv3 0/8] zram stats rework and code cleanup Sergey Senozhatsky
2014-01-16 13:12 ` [PATCHv3 1/8] zram: drop `init_done' struct zram member Sergey Senozhatsky
2014-01-16 13:12 ` Sergey Senozhatsky [this message]
2014-01-16 13:12 ` [PATCHv3 3/8] zram: remove good and bad compress stats Sergey Senozhatsky
2014-01-16 13:44 ` Jerome Marchand
2014-01-17 6:48 ` Minchan Kim
2014-01-16 13:12 ` [PATCHv3 4/8] zram: use atomic64_t for all zram stats Sergey Senozhatsky
2014-01-16 13:58 ` Jerome Marchand
2014-01-17 6:54 ` Minchan Kim
2014-01-16 13:12 ` [PATCHv3 5/8] zram: remove zram stats code duplication Sergey Senozhatsky
2014-01-17 6:54 ` Minchan Kim
2014-01-16 13:12 ` [PATCHv3 6/8] zram: report failed read and write stats Sergey Senozhatsky
2014-02-04 22:18 ` Andrew Morton
2014-02-05 9:52 ` Sergey Senozhatsky
2014-01-16 13:12 ` [PATCHv3 7/8] zram: drop not used table `count' member Sergey Senozhatsky
2014-01-16 13:52 ` Jerome Marchand
2014-01-16 14:17 ` Sergey Senozhatsky
2014-01-17 7:03 ` Minchan Kim
2014-01-16 13:12 ` [PATCHv3 8/8] zram: move zram size warning to documentation Sergey Senozhatsky
2014-01-17 7:08 ` Minchan Kim
2014-01-17 7:09 ` [PATCHv3 0/8] zram stats rework and code cleanup Minchan Kim
2014-01-20 4:42 ` Minchan Kim
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1389877936-15543-3-git-send-email-sergey.senozhatsky@gmail.com \
--to=sergey.senozhatsky@gmail.com \
--cc=akpm@linux-foundation.org \
--cc=jmarchan@redhat.com \
--cc=linux-kernel@vger.kernel.org \
--cc=minchan@kernel.org \
--cc=ngupta@vflare.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®