mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Maxime Ripard <maxime.ripard@free-electrons.com>
To: Mark Brown <broonie@kernel.org>,
	Mike Turquette <mturquette@linaro.org>,
	Emilio Lopez <emilio@elopez.com.ar>
Cc: linux-sunxi@googlegroups.com, linux-spi@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, kevin.z.m.zh@gmail.com,
	sunny@allwinnertech.com, shuge@allwinnertech.com,
	zhuzhenhua@allwinnertech.com,
	Maxime Ripard <maxime.ripard@free-electrons.com>
Subject: [PATCH 0/4] Add Allwinner A31 SPI controller support
Date: Thu, 16 Jan 2014 18:11:21 +0100	[thread overview]
Message-ID: <1389892285-11745-1-git-send-email-maxime.ripard@free-electrons.com> (raw)

Hi everyone,

This patchset brings support for the SPI controller found in the
Allwinner A31 SoC.

Even though the controller supports DMA, the driver only supports PIO
mode for now. This driver will be used to bring up and test DMA on the
SoC, so support for the DMA will come eventually.

It doesn't support transfer larger than the FIFO size (128 bytes) for
now, so this is kind of a blocker against inclusion, but I expect it
to be fixed by v2.

Thanks!
Maxime

Maxime Ripard (4):
  clk: sunxi: Add support for PLL6 on the A31
  ARM: sun6i: dt: Add PLL6 and SPI module clocks
  spi: sunxi: Add Allwinner A31 SPI controller driver
  ARM: sun6i: dt: Add SPI controllers to the A31 DTSI

 Documentation/devicetree/bindings/clock/sunxi.txt  |   1 +
 .../devicetree/bindings/spi/spi-sun6i.txt          |  23 +
 arch/arm/boot/dts/sun6i-a31.dtsi                   |  88 +++-
 drivers/clk/sunxi/clk-sunxi.c                      |  45 ++
 drivers/spi/Makefile                               |   1 +
 drivers/spi/spi-sun6i.c                            | 463 +++++++++++++++++++++
 6 files changed, 611 insertions(+), 10 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/spi/spi-sun6i.txt
 create mode 100644 drivers/spi/spi-sun6i.c

-- 
1.8.4.2


             reply	other threads:[~2014-01-16 17:15 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-01-16 17:11 Maxime Ripard [this message]
2014-01-16 17:11 ` [PATCH 1/4] clk: sunxi: Add support for PLL6 on the A31 Maxime Ripard
2014-01-17 22:14   ` Mike Turquette
2014-01-27 15:02     ` Maxime Ripard
2014-01-16 17:11 ` [PATCH 2/4] ARM: sun6i: dt: Add PLL6 and SPI module clocks Maxime Ripard
2014-01-16 18:15   ` Josh Cartwright
2014-01-17 12:07     ` Maxime Ripard
2014-01-16 17:11 ` [PATCH 3/4] spi: sunxi: Add Allwinner A31 SPI controller driver Maxime Ripard
2014-01-16 19:40   ` Mark Brown
2014-01-16 21:12     ` Maxime Ripard
2014-01-17 19:05       ` Mark Brown
2014-01-16 17:11 ` [PATCH 4/4] ARM: sun6i: dt: Add SPI controllers to the A31 DTSI Maxime Ripard

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1389892285-11745-1-git-send-email-maxime.ripard@free-electrons.com \
    --to=maxime.ripard@free-electrons.com \
    --cc=broonie@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=emilio@elopez.com.ar \
    --cc=kevin.z.m.zh@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-spi@vger.kernel.org \
    --cc=linux-sunxi@googlegroups.com \
    --cc=mturquette@linaro.org \
    --cc=shuge@allwinnertech.com \
    --cc=sunny@allwinnertech.com \
    --cc=zhuzhenhua@allwinnertech.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®