Re: [PATCH v6 3/9] spi: Add a driver for the Freescale/NXP QuadSPI controller

[Schrempf Frieder <frieder.schrempf@kontron.de>]

Hi Han,

On 29.11.18 17:30, Han Xu wrote:
> 
> 
>> -----Original Message-----
>> From: Schrempf Frieder <frieder.schrempf@kontron.de>
>> Sent: Thursday, November 29, 2018 5:54 AM
>> To: Yogesh Narayan Gaur <yogeshnarayan.gaur@nxp.com>; linux-
>> mtd@lists.infradead.org; boris.brezillon@bootlin.com; linux-
>> spi@vger.kernel.org; Marek Vasut <marek.vasut@gmail.com>; Mark Brown
>> <broonie@kernel.org>; Han Xu <han.xu@nxp.com>
>> Cc: dwmw2@infradead.org; computersforpeace@gmail.com;
>> richard@nod.at; miquel.raynal@bootlin.com; David Wolfe
>> <david.wolfe@nxp.com>; Fabio Estevam <fabio.estevam@nxp.com>;
>> Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>;
>> shawnguo@kernel.org; linux-kernel@vger.kernel.org
>> Subject: Re: [PATCH v6 3/9] spi: Add a driver for the Freescale/NXP QuadSPI
>> controller
>>
>> Hi Yogesh,
>>
>> On 29.11.18 12:38, Yogesh Narayan Gaur wrote:
>>> Hi Frieder,
>>>
>>>> -----Original Message-----
>>>> From: Schrempf Frieder [mailto:frieder.schrempf@kontron.de]
>>>> Sent: Wednesday, November 28, 2018 1:58 PM
>>>> To: linux-mtd@lists.infradead.org; boris.brezillon@bootlin.com;
>>>> linux- spi@vger.kernel.org; Marek Vasut <marek.vasut@gmail.com>;
>> Mark
>>>> Brown <broonie@kernel.org>; Han Xu <han.xu@nxp.com>
>>>> Cc: dwmw2@infradead.org; computersforpeace@gmail.com;
>> richard@nod.at;
>>>> miquel.raynal@bootlin.com; David Wolfe <david.wolfe@nxp.com>; Fabio
>>>> Estevam <fabio.estevam@nxp.com>; Prabhakar Kushwaha
>>>> <prabhakar.kushwaha@nxp.com>; Yogesh Narayan Gaur
>>>> <yogeshnarayan.gaur@nxp.com>; shawnguo@kernel.org; linux-
>>>> kernel@vger.kernel.org
>>>> Subject: Re: [PATCH v6 3/9] spi: Add a driver for the Freescale/NXP
>>>> QuadSPI controller
>>>>
>>>> On 27.11.18 11:24, Schrempf Frieder wrote:
>>>>> This driver is derived from the SPI NOR driver at
>>>>> mtd/spi-nor/fsl-quadspi.c. It uses the new SPI memory interface of
>>>>> the SPI framework to issue flash memory operations to up to four
>>>>> connected flash chips (2 buses with 2 CS each).
>>>>>
>>>>> The controller does not support generic SPI messages.
>>>>>
>>>>> This patch also disables the build of the "old" driver and reuses
>>>>> its Kconfig option CONFIG_SPI_FSL_QUADSPI to replace it.
>>>>>
>>>>> Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
>>>>> ---
>>>>>     drivers/mtd/spi-nor/Kconfig  |   9 -
>>>>>     drivers/mtd/spi-nor/Makefile |   1 -
>>>>>     drivers/spi/Kconfig          |  11 +
>>>>>     drivers/spi/Makefile         |   1 +
>>>>>     drivers/spi/spi-fsl-qspi.c   | 967
>>>> ++++++++++++++++++++++++++++++++++++++
>>>>>     5 files changed, 979 insertions(+), 10 deletions(-)
>>>>>
>>>>> diff --git a/drivers/mtd/spi-nor/Kconfig
>>>>> b/drivers/mtd/spi-nor/Kconfig index 6cc9c92..d1ca307 100644
>>>>> --- a/drivers/mtd/spi-nor/Kconfig
>>>>> +++ b/drivers/mtd/spi-nor/Kconfig
>>>>> @@ -59,15 +59,6 @@ config SPI_CADENCE_QUADSPI
>>>>>     	  device with a Cadence QSPI controller and want to access the
>>>>>     	  Flash as an MTD device.
>>>>>
>>>>> -config SPI_FSL_QUADSPI
>>>>> -	tristate "Freescale Quad SPI controller"
>>>>> -	depends on ARCH_MXC || SOC_LS1021A || ARCH_LAYERSCAPE ||
>>>> COMPILE_TEST
>>>>> -	depends on HAS_IOMEM
>>>>> -	help
>>>>> -	  This enables support for the Quad SPI controller in master mode.
>>>>> -	  This controller does not support generic SPI. It only supports
>>>>> -	  SPI NOR.
>>>>> -
>>>>>     config SPI_HISI_SFC
>>>>>     	tristate "Hisilicon SPI-NOR Flash Controller(SFC)"
>>>>>     	depends on ARCH_HISI || COMPILE_TEST diff --git
>>>>> a/drivers/mtd/spi-nor/Makefile b/drivers/mtd/spi-nor/Makefile index
>>>>> f4c61d2..3f160c2e3 100644
>>>>> --- a/drivers/mtd/spi-nor/Makefile
>>>>> +++ b/drivers/mtd/spi-nor/Makefile
>>>>> @@ -3,7 +3,6 @@ obj-$(CONFIG_MTD_SPI_NOR)	+= spi-nor.o
>>>>>     obj-$(CONFIG_SPI_ASPEED_SMC)	+= aspeed-smc.o
>>>>>     obj-$(CONFIG_SPI_ATMEL_QUADSPI)	+= atmel-quadspi.o
>>>>>     obj-$(CONFIG_SPI_CADENCE_QUADSPI)	+= cadence-quadspi.o
>>>>> -obj-$(CONFIG_SPI_FSL_QUADSPI)	+= fsl-quadspi.o
>>>>>     obj-$(CONFIG_SPI_HISI_SFC)	+= hisi-sfc.o
>>>>>     obj-$(CONFIG_MTD_MT81xx_NOR)    += mtk-quadspi.o
>>>>>     obj-$(CONFIG_SPI_NXP_SPIFI)	+= nxp-spifi.o
>>>>> diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index
>>>>> 7d3a5c9..8c84186 100644
>>>>> --- a/drivers/spi/Kconfig
>>>>> +++ b/drivers/spi/Kconfig
>>>>> @@ -259,6 +259,17 @@ config SPI_FSL_LPSPI
>>>>>     	help
>>>>>     	  This enables Freescale i.MX LPSPI controllers in master mode.
>>>>>
>>>>> +config SPI_FSL_QUADSPI
>>>>> +	tristate "Freescale QSPI controller"
>>>>> +	depends on ARCH_MXC || SOC_LS1021A || ARCH_LAYERSCAPE ||
>>>> COMPILE_TEST
>>>>> +	depends on HAS_IOMEM
>>>>> +	help
>>>>> +	  This enables support for the Quad SPI controller in master mode.
>>>>> +	  Up to four flash chips can be connected on two buses with two
>>>>> +	  chipselects each.
>>>>> +	  This controller does not support generic SPI messages. It only
>>>>> +	  supports the high-level SPI memory interface.
>>>>> +
>>> [...]
>>>>> +static void fsl_qspi_select_mem(struct fsl_qspi *q, struct
>>>>> +spi_device *spi) {
>>>>> +	unsigned long rate = spi->max_speed_hz;
>>>>> +	int ret, i;
>>>>> +	u32 map_addr;
>>>>
>>>> Forgot to drop some unused vars here. I will remove them in the next
>>>> version.
>>>>
>>>
>>> Yes, below are the build warnings messages coming for this version of the
>> patch.
>>>
>>> 	drivers/spi/spi-fsl-qspi.c: In function ‘fsl_qspi_select_mem’:
>>> 	drivers/spi/spi-fsl-qspi.c:500:6: warning: unused variable ‘map_addr’
>> [-Wunused-variable]
>>> 	  u32 map_addr;
>>> 	      ^
>>> 	drivers/spi/spi-fsl-qspi.c:499:11: warning: unused variable ‘i’ [-
>> Wunused-variable]
>>> 	  int ret, i;
>>>
>>>>> +
>>>>> +	if (q->selected == spi->chip_select)
>>> [...]
>>>
>>> Verified this patch series on LayerScape-2.x architecture boards.
>>> LS1088ardb, is having two connected flash slave devices on CS0 and CS1.
>>>
>>> Verified with simple Read/Write/Erase operations along with JFFS2
>> mounting and booting from flash MTD partition for both slave devices.
>>
>> Thank you for testing! Does this mean I can add your Tested-by tag?
>> If you have done a review of any of the patches in this set, please also add a
>> Reviewed-by tag.
> 
> Hi Schrempf, I am reviewing and testing on some i.MX platforms, please hold on for a while for the result.

Okay, thanks! I'm looking forward to see the results.

Regards,
Frieder