mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Steven Whitehouse <swhiteho@redhat.com>
To: linux-kernel@vger.kernel.org, cluster-devel@redhat.com
Cc: Steven Whitehouse <swhiteho@redhat.com>
Subject: [PATCH 10/24] GFS2: Consolidate transaction blocks calculation for dir add
Date: Mon, 20 Jan 2014 12:23:33 +0000	[thread overview]
Message-ID: <1390220627-1571-11-git-send-email-swhiteho@redhat.com> (raw)
In-Reply-To: <1390220627-1571-1-git-send-email-swhiteho@redhat.com>

There are three cases where we need to calculate the number of
blocks to reserve in a transaction involving linking an inode
into a directory. The one in rename is a bit more complicated,
but the basis of it is the same as for link and create. So it
makes sense to move this calculation into a single function
rather than repeating it three times.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>

diff --git a/fs/gfs2/inode.c b/fs/gfs2/inode.c
index 9ac8f13..fa4624f 100644
--- a/fs/gfs2/inode.c
+++ b/fs/gfs2/inode.c
@@ -469,6 +469,28 @@ static void init_dinode(struct gfs2_inode *dip, struct gfs2_inode *ip,
 	brelse(dibh);
 }
 
+/**
+ * gfs2_trans_da_blocks - Calculate number of blocks to link inode
+ * @dip: The directory we are linking into
+ * @da: The dir add information
+ * @nr_inodes: The number of inodes involved
+ *
+ * This calculate the number of blocks we need to reserve in a
+ * transaction to link @nr_inodes into a directory. In most cases
+ * @nr_inodes will be 2 (the directory plus the inode being linked in)
+ * but in case of rename, 4 may be required.
+ *
+ * Returns: Number of blocks
+ */
+
+static unsigned gfs2_trans_da_blks(const struct gfs2_inode *dip,
+				   const struct gfs2_diradd *da,
+				   unsigned nr_inodes)
+{
+	return da->nr_blocks + gfs2_rg_blocks(dip, da->nr_blocks) +
+	       (nr_inodes * RES_DINODE) + RES_QUOTA + RES_STATFS;
+}
+
 static int link_dinode(struct gfs2_inode *dip, const struct qstr *name,
 		       struct gfs2_inode *ip, struct gfs2_diradd *da)
 {
@@ -485,10 +507,7 @@ static int link_dinode(struct gfs2_inode *dip, const struct qstr *name,
 		if (error)
 			goto fail_quota_locks;
 
-		error = gfs2_trans_begin(sdp, da->nr_blocks +
-					 gfs2_rg_blocks(dip, da->nr_blocks) +
-					 2 * RES_DINODE +
-					 RES_STATFS + RES_QUOTA, 0);
+		error = gfs2_trans_begin(sdp, gfs2_trans_da_blks(dip, da, 2), 0);
 		if (error)
 			goto fail_ipreserv;
 	} else {
@@ -886,10 +905,7 @@ static int gfs2_link(struct dentry *old_dentry, struct inode *dir,
 		if (error)
 			goto out_gunlock_q;
 
-		error = gfs2_trans_begin(sdp, da.nr_blocks +
-					 gfs2_rg_blocks(dip, da.nr_blocks) +
-					 2 * RES_DINODE + RES_STATFS +
-					 RES_QUOTA, 0);
+		error = gfs2_trans_begin(sdp, gfs2_trans_da_blks(dip, &da, 2), 0);
 		if (error)
 			goto out_ipres;
 	} else {
@@ -1403,10 +1419,8 @@ static int gfs2_rename(struct inode *odir, struct dentry *odentry,
 		if (error)
 			goto out_gunlock_q;
 
-		error = gfs2_trans_begin(sdp, da.nr_blocks +
-					 gfs2_rg_blocks(ndip, da.nr_blocks) +
-					 4 * RES_DINODE + 4 * RES_LEAF +
-					 RES_STATFS + RES_QUOTA + 4, 0);
+		error = gfs2_trans_begin(sdp, gfs2_trans_da_blks(ndip, &da, 4) +
+					 4 * RES_LEAF + 4, 0);
 		if (error)
 			goto out_ipreserv;
 	} else {
-- 
1.8.3.1


  parent reply	other threads:[~2014-01-20 12:29 UTC|newest]

Thread overview: 29+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-01-20 12:23 GFS2: Pre-pull patch posting (merge window) Steven Whitehouse
2014-01-20 12:23 ` [PATCH 01/24] GFS2: If requested is too large, use the largest extent in the rgrp Steven Whitehouse
2014-01-20 12:23 ` [PATCH 02/24] GFS2: Drop inadequate rgrps from the reservation tree Steven Whitehouse
2014-01-20 12:23 ` [PATCH 03/24] GFS2: Implement a "rgrp has no extents longer than X" scheme Steven Whitehouse
2014-01-20 12:23 ` [PATCH 04/24] GFS2: Clean up releasepage Steven Whitehouse
2014-01-20 12:23 ` [PATCH 05/24] GFS2: Remove gfs2_quota_change_host structure Steven Whitehouse
2014-01-20 12:23 ` [PATCH 06/24] GFS2: Remove test which is always true Steven Whitehouse
2014-01-20 12:23 ` [PATCH 07/24] GFS2: Use range based functions for rgrp sync/invalidation Steven Whitehouse
2014-01-20 12:23 ` [PATCH 08/24] GFS2: Use only a single address space for rgrps Steven Whitehouse
2014-01-20 12:23 ` [PATCH 09/24] GFS2: Add directory addition info structure Steven Whitehouse
2014-01-20 12:23 ` Steven Whitehouse [this message]
2014-01-20 12:23 ` [PATCH 11/24] GFS2: Remember directory insert point Steven Whitehouse
2014-01-20 12:23 ` [PATCH 12/24] GFS2: Increase i_writecount during gfs2_setattr_chown Steven Whitehouse
2014-01-20 12:23 ` [PATCH 13/24] GFS2: For exhash conversion, only one block is needed Steven Whitehouse
2014-01-20 12:23 ` [PATCH 14/24] GFS2: Add hints to directory leaf blocks Steven Whitehouse
2014-01-20 12:23 ` [PATCH 15/24] GFS2: Add initialization for address space in super block Steven Whitehouse
2014-01-20 12:23 ` [PATCH 16/24] GFS2: No need to invalidate pages for a dio read Steven Whitehouse
2014-01-20 12:23 ` [PATCH 17/24] GFS2: Use RCU/hlist_bl based hash for quotas Steven Whitehouse
2014-01-22  5:32   ` Paul E. McKenney
2014-01-22  6:06     ` Sasha Levin
2014-01-22  9:43       ` Steven Whitehouse
2014-01-22  9:58     ` Steven Whitehouse
2014-01-20 12:23 ` [PATCH 18/24] GFS2: Only run logd and quota when mounted read/write Steven Whitehouse
2014-01-20 12:23 ` [PATCH 19/24] GFS2: Clean up quota slot allocation Steven Whitehouse
2014-01-20 12:23 ` [PATCH 20/24] GFS2: Move quota bitmap operations under their own lock Steven Whitehouse
2014-01-20 12:23 ` [PATCH 21/24] GFS2: Fix kbuild test robot reported warning Steven Whitehouse
2014-01-20 12:23 ` [PATCH 22/24] GFS2: Don't use ENOBUFS when ENOMEM is the correct error code Steven Whitehouse
2014-01-20 12:23 ` [PATCH 23/24] GFS2: Small cleanup Steven Whitehouse
2014-01-20 12:23 ` [PATCH 24/24] GFS2: revert "GFS2: d_splice_alias() can't return error" Steven Whitehouse

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1390220627-1571-11-git-send-email-swhiteho@redhat.com \
    --to=swhiteho@redhat.com \
    --cc=cluster-devel@redhat.com \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®