mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Benjamin Tissoires <benjamin.tissoires@redhat.com>
To: Benjamin Tissoires <benjamin.tissoires@gmail.com>,
	Dmitry Torokhov <dmitry.torokhov@gmail.com>,
	David Herrmann <dh.herrmann@gmail.com>,
	Peter Hutterer <peter.hutterer@who-t.net>,
	linux-input@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v4 1/2] input/uinput: replace breaks by goto out in uinput_ioctl_handler
Date: Wed, 22 Jan 2014 12:23:59 -0500	[thread overview]
Message-ID: <1390411440-1158-1-git-send-email-benjamin.tissoires@redhat.com> (raw)

From: Benjamin Tisssoires <benjamin.tissoires@redhat.com>

The current implementation prevents us to add variable-length ioctl.
Use a bunch of gotos instead of break to allow us to do so.

No functional changes.

Signed-off-by: Benjamin Tisssoires <benjamin.tissoires@redhat.com>
---

changes since v3:
- brand new patch :)

 drivers/input/misc/uinput.c | 56 ++++++++++++++++++++++-----------------------
 1 file changed, 27 insertions(+), 29 deletions(-)

diff --git a/drivers/input/misc/uinput.c b/drivers/input/misc/uinput.c
index 7728359..d8ae08d 100644
--- a/drivers/input/misc/uinput.c
+++ b/drivers/input/misc/uinput.c
@@ -693,51 +693,51 @@ static long uinput_ioctl_handler(struct file *file, unsigned int cmd,
 	switch (cmd) {
 		case UI_DEV_CREATE:
 			retval = uinput_create_device(udev);
-			break;
+			goto out;
 
 		case UI_DEV_DESTROY:
 			uinput_destroy_device(udev);
-			break;
+			goto out;
 
 		case UI_SET_EVBIT:
 			retval = uinput_set_bit(arg, evbit, EV_MAX);
-			break;
+			goto out;
 
 		case UI_SET_KEYBIT:
 			retval = uinput_set_bit(arg, keybit, KEY_MAX);
-			break;
+			goto out;
 
 		case UI_SET_RELBIT:
 			retval = uinput_set_bit(arg, relbit, REL_MAX);
-			break;
+			goto out;
 
 		case UI_SET_ABSBIT:
 			retval = uinput_set_bit(arg, absbit, ABS_MAX);
-			break;
+			goto out;
 
 		case UI_SET_MSCBIT:
 			retval = uinput_set_bit(arg, mscbit, MSC_MAX);
-			break;
+			goto out;
 
 		case UI_SET_LEDBIT:
 			retval = uinput_set_bit(arg, ledbit, LED_MAX);
-			break;
+			goto out;
 
 		case UI_SET_SNDBIT:
 			retval = uinput_set_bit(arg, sndbit, SND_MAX);
-			break;
+			goto out;
 
 		case UI_SET_FFBIT:
 			retval = uinput_set_bit(arg, ffbit, FF_MAX);
-			break;
+			goto out;
 
 		case UI_SET_SWBIT:
 			retval = uinput_set_bit(arg, swbit, SW_MAX);
-			break;
+			goto out;
 
 		case UI_SET_PROPBIT:
 			retval = uinput_set_bit(arg, propbit, INPUT_PROP_MAX);
-			break;
+			goto out;
 
 		case UI_SET_PHYS:
 			if (udev->state == UIST_CREATED) {
@@ -753,18 +753,18 @@ static long uinput_ioctl_handler(struct file *file, unsigned int cmd,
 
 			kfree(udev->dev->phys);
 			udev->dev->phys = phys;
-			break;
+			goto out;
 
 		case UI_BEGIN_FF_UPLOAD:
 			retval = uinput_ff_upload_from_user(p, &ff_up);
 			if (retval)
-				break;
+				goto out;
 
 			req = uinput_request_find(udev, ff_up.request_id);
 			if (!req || req->code != UI_FF_UPLOAD ||
 			    !req->u.upload.effect) {
 				retval = -EINVAL;
-				break;
+				goto out;
 			}
 
 			ff_up.retval = 0;
@@ -775,65 +775,63 @@ static long uinput_ioctl_handler(struct file *file, unsigned int cmd,
 				memset(&ff_up.old, 0, sizeof(struct ff_effect));
 
 			retval = uinput_ff_upload_to_user(p, &ff_up);
-			break;
+			goto out;
 
 		case UI_BEGIN_FF_ERASE:
 			if (copy_from_user(&ff_erase, p, sizeof(ff_erase))) {
 				retval = -EFAULT;
-				break;
+				goto out;
 			}
 
 			req = uinput_request_find(udev, ff_erase.request_id);
 			if (!req || req->code != UI_FF_ERASE) {
 				retval = -EINVAL;
-				break;
+				goto out;
 			}
 
 			ff_erase.retval = 0;
 			ff_erase.effect_id = req->u.effect_id;
 			if (copy_to_user(p, &ff_erase, sizeof(ff_erase))) {
 				retval = -EFAULT;
-				break;
+				goto out;
 			}
 
-			break;
+			goto out;
 
 		case UI_END_FF_UPLOAD:
 			retval = uinput_ff_upload_from_user(p, &ff_up);
 			if (retval)
-				break;
+				goto out;
 
 			req = uinput_request_find(udev, ff_up.request_id);
 			if (!req || req->code != UI_FF_UPLOAD ||
 			    !req->u.upload.effect) {
 				retval = -EINVAL;
-				break;
+				goto out;
 			}
 
 			req->retval = ff_up.retval;
 			uinput_request_done(udev, req);
-			break;
+			goto out;
 
 		case UI_END_FF_ERASE:
 			if (copy_from_user(&ff_erase, p, sizeof(ff_erase))) {
 				retval = -EFAULT;
-				break;
+				goto out;
 			}
 
 			req = uinput_request_find(udev, ff_erase.request_id);
 			if (!req || req->code != UI_FF_ERASE) {
 				retval = -EINVAL;
-				break;
+				goto out;
 			}
 
 			req->retval = ff_erase.retval;
 			uinput_request_done(udev, req);
-			break;
-
-		default:
-			retval = -EINVAL;
+			goto out;
 	}
 
+	retval = -EINVAL;
  out:
 	mutex_unlock(&udev->mutex);
 	return retval;
-- 
1.8.4.2


             reply	other threads:[~2014-01-22 17:24 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-01-22 17:23 Benjamin Tissoires [this message]
2014-01-22 17:24 ` [PATCH v4 2/2] input/uinput: add UI_GET_SYSNAME ioctl to retrieve the sysfs path Benjamin Tissoires
2014-01-23 14:37   ` David Herrmann
2014-01-23 14:35 ` [PATCH v4 1/2] input/uinput: replace breaks by goto out in uinput_ioctl_handler David Herrmann

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1390411440-1158-1-git-send-email-benjamin.tissoires@redhat.com \
    --to=benjamin.tissoires@redhat.com \
    --cc=benjamin.tissoires@gmail.com \
    --cc=dh.herrmann@gmail.com \
    --cc=dmitry.torokhov@gmail.com \
    --cc=linux-input@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=peter.hutterer@who-t.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®