Re: [PATCH 3/3] net: via-rhine: add OF bus binding

[Ben Hutchings <ben@decadent.org.uk>]

[-- Attachment #1: Type: text/plain, Size: 1638 bytes --]

On Mon, 2014-01-27 at 19:34 +0400, Alexey Charkov wrote:
> 2014/1/27 Ben Hutchings <ben@decadent.org.uk>:
> > On Mon, 2014-01-27 at 15:51 +0400, Alexey Charkov wrote:
> >> This should make the driver usable with VIA/WonderMedia ARM-based
> >> Systems-on-Chip integrated Rhine III adapters. Note that these
> >> are always in MMIO mode, and don't have any known EEPROM.
> > [...]
> >> --- a/drivers/net/ethernet/via/Kconfig
> >> +++ b/drivers/net/ethernet/via/Kconfig
> >> @@ -19,7 +19,7 @@ if NET_VENDOR_VIA
> >>
> >>  config VIA_RHINE
> >>         tristate "VIA Rhine support"
> >> -       depends on PCI
> >> +       depends on (PCI || USE_OF)
> >>         select CRC32
> >>         select MII
> >>         ---help---
> >
> > This seems like the right thing to do, but it means you need to add
> > #ifdef CONFIG_PCI and #ifdef CONFIG_USE_OF around the driver structures
> > and related functions.
> 
> Frankly, I would like to avoid that if possible (as pointed out in the
> cover email), as I believe we would get a cleaner driver without
> #ifdef. This is also the way it was done in via-velocity, and it works
> just fine.

OK, I'm surprised that all the PCI functions have dummy definitions.

> > You should compile-test in configurations that have just one of those
> > dependencies enabled.
> 
> This has been compile-tested and runtime-tested in OF-only
> configuration on WM8950, and Roger also tested it in PCI-only
> configuration, so it seems to work fine.
[...]

Good, then I have no objection.

Ben.

-- 
Ben Hutchings
If at first you don't succeed, you're doing about average.

[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 828 bytes --]