From: Maxime COQUELIN <maxime.coquelin@st.com>
To: Mike Turquette <mturquette@linaro.org>,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Cc: kernel@stlinux.com, maxime.coquelin@st.com
Subject: [PATCH 1/3] clk: divider: Fix best div calculation for power-of-two and table dividers
Date: Wed, 29 Jan 2014 17:24:06 +0100 [thread overview]
Message-ID: <1391012648-12481-2-git-send-email-maxime.coquelin@st.com> (raw)
In-Reply-To: <1391012648-12481-1-git-send-email-maxime.coquelin@st.com>
The divider returned by clk_divider_bestdiv() is likely to be invalid in case
of power-of-two and table dividers when CLK_SET_RATE_PARENT flag isn't set.
Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
---
drivers/clk/clk-divider.c | 37 ++++++++++++++++++++++++++++++++++++-
1 file changed, 36 insertions(+), 1 deletion(-)
diff --git a/drivers/clk/clk-divider.c b/drivers/clk/clk-divider.c
index 5543b7d..2137d58 100644
--- a/drivers/clk/clk-divider.c
+++ b/drivers/clk/clk-divider.c
@@ -144,6 +144,37 @@ static bool _is_valid_div(struct clk_divider *divider, unsigned int div)
return true;
}
+static int _round_up_table(const struct clk_div_table *table, int div)
+{
+ const struct clk_div_table *clkt;
+ int up = _get_table_maxdiv(table);
+
+ for (clkt = table; clkt->div; clkt++) {
+ if (clkt->div == div)
+ return clkt->div;
+ else if (clkt->div < div)
+ continue;
+
+ if ((clkt->div - div) < (up - div))
+ up = clkt->div;
+ }
+
+ return up;
+}
+
+static int _div_round_up(struct clk_divider *divider,
+ unsigned long parent_rate, unsigned long rate)
+{
+ int div = DIV_ROUND_UP(parent_rate, rate);
+
+ if (divider->flags & CLK_DIVIDER_POWER_OF_TWO)
+ div = __roundup_pow_of_two(div);
+ if (divider->table)
+ div = _round_up_table(divider->table, div);
+
+ return div;
+}
+
static int clk_divider_bestdiv(struct clk_hw *hw, unsigned long rate,
unsigned long *best_parent_rate)
{
@@ -159,7 +190,7 @@ static int clk_divider_bestdiv(struct clk_hw *hw, unsigned long rate,
if (!(__clk_get_flags(hw->clk) & CLK_SET_RATE_PARENT)) {
parent_rate = *best_parent_rate;
- bestdiv = DIV_ROUND_UP(parent_rate, rate);
+ bestdiv = _div_round_up(divider, parent_rate, rate);
bestdiv = bestdiv == 0 ? 1 : bestdiv;
bestdiv = bestdiv > maxdiv ? maxdiv : bestdiv;
return bestdiv;
@@ -219,6 +250,10 @@ static int clk_divider_set_rate(struct clk_hw *hw, unsigned long rate,
u32 val;
div = parent_rate / rate;
+
+ if (!_is_valid_div(divider, div))
+ return -EINVAL;
+
value = _get_val(divider, div);
if (value > div_mask(divider))
--
1.7.9.5
next prev parent reply other threads:[~2014-01-29 16:48 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-01-29 16:24 [PATCH 0/3] CCF clock divider changes Maxime COQUELIN
2014-01-29 16:24 ` Maxime COQUELIN [this message]
2014-04-25 15:31 ` [PATCH 1/3] clk: divider: Fix best div calculation for power-of-two and table dividers Mike Turquette
2014-01-29 16:24 ` [PATCH 2/3] clk: divider: Add round to closest divider Maxime COQUELIN
2014-04-24 15:37 ` Mike Turquette
2014-01-29 16:24 ` [PATCH 3/3] clk: divider: Optimize clk_divider_bestdiv loop Maxime COQUELIN
2014-02-11 10:20 ` [PATCH 0/3] CCF clock divider changes Maxime Coquelin
2014-02-11 10:37 ` Maxime Coquelin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1391012648-12481-2-git-send-email-maxime.coquelin@st.com \
--to=maxime.coquelin@st.com \
--cc=kernel@stlinux.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mturquette@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®