From: Liviu Dudau <Liviu.Dudau@arm.com>
To: linux-pci <linux-pci@vger.kernel.org>,
Bjorn Helgaas <bhelgaas@google.com>,
Catalin Marinas <Catalin.Marinas@arm.com>,
Will Deacon <Will.Deacon@arm.com>
Cc: LKML <linux-kernel@vger.kernel.org>,
"devicetree@vger.kernel.org" <devicetree@vger.kernel.org>,
LAKML <linux-arm-kernel@lists.infradead.org>,
linaro-kernel <linaro-kernel@lists.linaro.org>,
Arnd Bergmann <arnd@arndb.de>
Subject: [PATCH] [RFC] Add AArch64 support for PCI
Date: Mon, 3 Feb 2014 18:43:47 +0000 [thread overview]
Message-ID: <1391453028-23191-1-git-send-email-Liviu.Dudau@arm.com> (raw)
Hi,
This patch adds support for PCI to AArch64. It is based on the patch posted
here [1] that adds support for creating generic host bridge structure from
device tree. With that in place, I was able to boot an FPGA platform that
has PCIe host bridge support and use a PCIe network card.
The API used is different from the one used by ARM architecture. There is
no pci_common_init_dev() function and no hw_pci structure, as that is no
longer needed. Once the last signature is added to the legal agreement, I
will post the host bridge driver code that I am using. Meanwhile, here
is an example of what the probe function looks like, posted as an example:
static int myhostbridge_probe(struct platform_device *pdev)
{
int err;
struct device_node *dev;
struct pci_host_bridge *bridge;
struct resource bus_range;
struct myhostbridge_port *pp;
LIST_HEAD(resources);
dev = pdev->dev.of_node;
if (!of_device_is_available(dev)) {
pr_warn("%s: disabled\n", dev->full_name);
return -ENODEV;
}
pp = kzalloc(sizeof(struct myhostbridge_port), GFP_KERNEL);
if (!pp)
return -ENOMEM;
err = of_pci_parse_bus_range(dev, &bus_range);
if (err) {
bus_range.start = 0;
bus_range.end = 255;
bus_range.flags = IORESOURCE_BUS;
}
pci_add_resource(&resources, &bus_range);
bridge = pci_host_bridge_of_init(&pdev->dev, 0, &myhostbridge_ops, pp, &resources);
if (!bridge) {
err = -EINVAL;
goto bridge_init_fail;
}
err = myhostbridge_setup(bridge->bus);
if (err)
goto bridge_init_fail;
/*
* Add flags here, this is just an example
*/
pci_add_flags(PCI_ENABLE_PROC_DOMAINS | PCI_COMPAT_DOMAIN_0);
pci_add_flags(PCI_REASSIGN_ALL_BUS | PCI_REASSIGN_ALL_RSRC);
bus_range.end = pci_scan_child_bus(bridge->bus);
pci_bus_update_busn_res_end(bridge->bus, bus_range.end);
pci_assign_unassigned_bus_resources(bridge->bus);
pci_bus_add_devices(bridge->bus);
return 0;
bridge_init_fail:
kfree(pp);
pci_free_resource_list(&resources);
return err;
}
Best regards,
Liviu
[1] http://marc.info/?l=linux-pci&m=139145254821334&w=2
Liviu Dudau (1):
arm64: Add support for PCI
arch/arm64/Kconfig | 17 +++++++
arch/arm64/include/asm/Kbuild | 1 +
arch/arm64/include/asm/io.h | 4 ++
arch/arm64/include/asm/pci.h | 35 +++++++++++++
arch/arm64/kernel/Makefile | 1 +
arch/arm64/kernel/pci.c | 112 ++++++++++++++++++++++++++++++++++++++++++
6 files changed, 170 insertions(+)
create mode 100644 arch/arm64/include/asm/pci.h
create mode 100644 arch/arm64/kernel/pci.c
--
1.8.5.3
next reply other threads:[~2014-02-03 18:44 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-02-03 18:43 Liviu Dudau [this message]
2014-02-03 18:43 ` [PATCH] arm64: Add architecture " Liviu Dudau
2014-02-03 18:58 ` Arnd Bergmann
2014-02-03 19:18 ` Liviu Dudau
2014-02-03 20:05 ` Arnd Bergmann
2014-02-03 21:36 ` Liviu Dudau
2014-02-04 8:44 ` Arnd Bergmann
2014-02-04 11:09 ` Liviu Dudau
2014-02-04 11:54 ` Arnd Bergmann
2014-02-04 16:41 ` Catalin Marinas
2014-02-03 23:07 ` Rob Herring
2014-02-03 23:31 ` Jason Gunthorpe
2014-02-04 9:44 ` Arnd Bergmann
2014-02-04 13:57 ` Rob Herring
2014-02-04 19:50 ` Arnd Bergmann
2014-02-04 18:15 ` Jason Gunthorpe
2014-02-04 18:34 ` Arnd Bergmann
2014-02-04 19:10 ` Jason Gunthorpe
2014-02-04 19:21 ` Arnd Bergmann
2014-02-04 9:01 ` Arnd Bergmann
2014-02-03 22:34 ` Andrew Murray
2014-02-04 12:29 ` Liviu Dudau
2014-02-04 13:23 ` Andrew Murray
2014-02-04 16:18 ` Arnd Bergmann
2014-02-18 6:33 ` Yijing Wang
2014-02-20 14:38 ` Liviu Dudau
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1391453028-23191-1-git-send-email-Liviu.Dudau@arm.com \
--to=liviu.dudau@arm.com \
--cc=Catalin.Marinas@arm.com \
--cc=Will.Deacon@arm.com \
--cc=arnd@arndb.de \
--cc=bhelgaas@google.com \
--cc=devicetree@vger.kernel.org \
--cc=linaro-kernel@lists.linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®