mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Xiubo Li <Li.Xiubo@freescale.com>
To: <broonie@kernel.org>, <lgirdwood@gmail.com>,
	<Guangyu.Chen@freescale.com>
Cc: <perex@perex.cz>, <tiwai@suse.de>, <alsa-devel@alsa-project.org>,
	<linux-kernel@vger.kernel.org>, Xiubo Li <Li.Xiubo@freescale.com>
Subject: [PATCH 1/2] ASoC: fsl-spdif: big-endian support
Date: Tue, 11 Feb 2014 13:41:15 +0800	[thread overview]
Message-ID: <1392097276-14705-1-git-send-email-Li.Xiubo@freescale.com> (raw)

For most platforms, the CPU and SPDIF device is in the same endianess
mode. While for the LS1 platform, the CPU is in LE mode and the SPDIF
is in BE mode.

Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com>
Cc: Nicolin Chen <Guangyu.Chen@freescale.com>
---
 Documentation/devicetree/bindings/sound/fsl,spdif.txt | 4 ++++
 sound/soc/fsl/fsl_spdif.c                             | 8 +++++++-
 2 files changed, 11 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/sound/fsl,spdif.txt b/Documentation/devicetree/bindings/sound/fsl,spdif.txt
index f2ae335..433ad00 100644
--- a/Documentation/devicetree/bindings/sound/fsl,spdif.txt
+++ b/Documentation/devicetree/bindings/sound/fsl,spdif.txt
@@ -29,6 +29,10 @@ Required properties:
 			can also be referred to TxClk_Source
 			bit of register SPDIF_STC.
 
+   - big-endian : If this property is absent, the native endian mode will
+   be in use as default, or the big endian mode will be in use for all the
+   device registers.
+
 Example:
 
 spdif: spdif@02004000 {
diff --git a/sound/soc/fsl/fsl_spdif.c b/sound/soc/fsl/fsl_spdif.c
index 8f36f49..2f8ad75 100644
--- a/sound/soc/fsl/fsl_spdif.c
+++ b/sound/soc/fsl/fsl_spdif.c
@@ -83,6 +83,8 @@ struct fsl_spdif_priv {
 	struct snd_dmaengine_dai_dma_data dma_params_tx;
 	struct snd_dmaengine_dai_dma_data dma_params_rx;
 
+	bool big_endian;
+
 	/* The name space will be allocated dynamically */
 	char name[0];
 };
@@ -985,7 +987,7 @@ static bool fsl_spdif_writeable_reg(struct device *dev, unsigned int reg)
 	}
 }
 
-static const struct regmap_config fsl_spdif_regmap_config = {
+static struct regmap_config fsl_spdif_regmap_config = {
 	.reg_bits = 32,
 	.reg_stride = 4,
 	.val_bits = 32,
@@ -1105,6 +1107,10 @@ static int fsl_spdif_probe(struct platform_device *pdev)
 	memcpy(&spdif_priv->cpu_dai_drv, &fsl_spdif_dai, sizeof(fsl_spdif_dai));
 	spdif_priv->cpu_dai_drv.name = spdif_priv->name;
 
+	spdif_priv->big_endian = of_property_read_bool(np, "big-endian");
+	if (spdif_priv->big_endian)
+		fsl_spdif_regmap_config.val_format_endian = REGMAP_ENDIAN_BIG;
+
 	/* Get the addresses and IRQ */
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	regs = devm_ioremap_resource(&pdev->dev, res);
-- 
1.8.4



             reply	other threads:[~2014-02-11  6:44 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-02-11  5:41 Xiubo Li [this message]
2014-02-11  5:41 ` [PATCH 2/2] ASoC: fsl-esai: " Xiubo Li
2014-02-11  7:14   ` Nicolin Chen
2014-02-11  7:27     ` Li.Xiubo
2014-02-11  7:10 ` [PATCH 1/2] ASoC: fsl-spdif: " Nicolin Chen
2014-02-11  7:25   ` Li.Xiubo
2014-02-11  7:39   ` Li.Xiubo
2014-02-11  8:06     ` Nicolin Chen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1392097276-14705-1-git-send-email-Li.Xiubo@freescale.com \
    --to=li.xiubo@freescale.com \
    --cc=Guangyu.Chen@freescale.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=broonie@kernel.org \
    --cc=lgirdwood@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=perex@perex.cz \
    --cc=tiwai@suse.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®