From: Roger Quadros <rogerq@ti.com>
To: <tony@atomide.com>, <bcousson@baylibre.com>, <lee.jones@linaro.org>
Cc: <balbi@ti.com>, <nm@ti.com>, <khilman@linaro.org>,
<linux-omap@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>, <devicetree@vger.kernel.org>,
<linux-usb@vger.kernel.org>, Roger Quadros <rogerq@ti.com>,
Samuel Ortiz <sameo@linux.intel.com>
Subject: [PATCH v7 01/12] mfd: omap-usb-host: Use resource managed clk_get()
Date: Wed, 12 Feb 2014 12:18:42 +0200 [thread overview]
Message-ID: <1392200333-28397-2-git-send-email-rogerq@ti.com> (raw)
In-Reply-To: <1392200333-28397-1-git-send-email-rogerq@ti.com>
Use devm_clk_get() instead of clk_get().
CC: Lee Jones <lee.jones@linaro.org>
CC: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Roger Quadros <rogerq@ti.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
---
drivers/mfd/omap-usb-host.c | 81 +++++++++------------------------------------
1 file changed, 16 insertions(+), 65 deletions(-)
diff --git a/drivers/mfd/omap-usb-host.c b/drivers/mfd/omap-usb-host.c
index 90b630c..0c3c9a0 100644
--- a/drivers/mfd/omap-usb-host.c
+++ b/drivers/mfd/omap-usb-host.c
@@ -674,46 +674,46 @@ static int usbhs_omap_probe(struct platform_device *pdev)
omap->ehci_logic_fck = ERR_PTR(-EINVAL);
if (need_logic_fck) {
- omap->ehci_logic_fck = clk_get(dev, "ehci_logic_fck");
+ omap->ehci_logic_fck = devm_clk_get(dev, "ehci_logic_fck");
if (IS_ERR(omap->ehci_logic_fck)) {
ret = PTR_ERR(omap->ehci_logic_fck);
dev_dbg(dev, "ehci_logic_fck failed:%d\n", ret);
}
}
- omap->utmi_p1_gfclk = clk_get(dev, "utmi_p1_gfclk");
+ omap->utmi_p1_gfclk = devm_clk_get(dev, "utmi_p1_gfclk");
if (IS_ERR(omap->utmi_p1_gfclk)) {
ret = PTR_ERR(omap->utmi_p1_gfclk);
dev_err(dev, "utmi_p1_gfclk failed error:%d\n", ret);
- goto err_p1_gfclk;
+ goto err_mem;
}
- omap->utmi_p2_gfclk = clk_get(dev, "utmi_p2_gfclk");
+ omap->utmi_p2_gfclk = devm_clk_get(dev, "utmi_p2_gfclk");
if (IS_ERR(omap->utmi_p2_gfclk)) {
ret = PTR_ERR(omap->utmi_p2_gfclk);
dev_err(dev, "utmi_p2_gfclk failed error:%d\n", ret);
- goto err_p2_gfclk;
+ goto err_mem;
}
- omap->xclk60mhsp1_ck = clk_get(dev, "xclk60mhsp1_ck");
+ omap->xclk60mhsp1_ck = devm_clk_get(dev, "xclk60mhsp1_ck");
if (IS_ERR(omap->xclk60mhsp1_ck)) {
ret = PTR_ERR(omap->xclk60mhsp1_ck);
dev_err(dev, "xclk60mhsp1_ck failed error:%d\n", ret);
- goto err_xclk60mhsp1;
+ goto err_mem;
}
- omap->xclk60mhsp2_ck = clk_get(dev, "xclk60mhsp2_ck");
+ omap->xclk60mhsp2_ck = devm_clk_get(dev, "xclk60mhsp2_ck");
if (IS_ERR(omap->xclk60mhsp2_ck)) {
ret = PTR_ERR(omap->xclk60mhsp2_ck);
dev_err(dev, "xclk60mhsp2_ck failed error:%d\n", ret);
- goto err_xclk60mhsp2;
+ goto err_mem;
}
- omap->init_60m_fclk = clk_get(dev, "init_60m_fclk");
+ omap->init_60m_fclk = devm_clk_get(dev, "init_60m_fclk");
if (IS_ERR(omap->init_60m_fclk)) {
ret = PTR_ERR(omap->init_60m_fclk);
dev_err(dev, "init_60m_fclk failed error:%d\n", ret);
- goto err_init60m;
+ goto err_mem;
}
for (i = 0; i < omap->nports; i++) {
@@ -727,21 +727,21 @@ static int usbhs_omap_probe(struct platform_device *pdev)
* platforms have all clocks and we can function without
* them
*/
- omap->utmi_clk[i] = clk_get(dev, clkname);
+ omap->utmi_clk[i] = devm_clk_get(dev, clkname);
if (IS_ERR(omap->utmi_clk[i]))
dev_dbg(dev, "Failed to get clock : %s : %ld\n",
clkname, PTR_ERR(omap->utmi_clk[i]));
snprintf(clkname, sizeof(clkname),
"usb_host_hs_hsic480m_p%d_clk", i + 1);
- omap->hsic480m_clk[i] = clk_get(dev, clkname);
+ omap->hsic480m_clk[i] = devm_clk_get(dev, clkname);
if (IS_ERR(omap->hsic480m_clk[i]))
dev_dbg(dev, "Failed to get clock : %s : %ld\n",
clkname, PTR_ERR(omap->hsic480m_clk[i]));
snprintf(clkname, sizeof(clkname),
"usb_host_hs_hsic60m_p%d_clk", i + 1);
- omap->hsic60m_clk[i] = clk_get(dev, clkname);
+ omap->hsic60m_clk[i] = devm_clk_get(dev, clkname);
if (IS_ERR(omap->hsic60m_clk[i]))
dev_dbg(dev, "Failed to get clock : %s : %ld\n",
clkname, PTR_ERR(omap->hsic60m_clk[i]));
@@ -784,7 +784,7 @@ static int usbhs_omap_probe(struct platform_device *pdev)
if (ret) {
dev_err(dev, "Failed to create DT children: %d\n", ret);
- goto err_alloc;
+ goto err_mem;
}
} else {
@@ -792,40 +792,12 @@ static int usbhs_omap_probe(struct platform_device *pdev)
if (ret) {
dev_err(dev, "omap_usbhs_alloc_children failed: %d\n",
ret);
- goto err_alloc;
+ goto err_mem;
}
}
return 0;
-err_alloc:
- for (i = 0; i < omap->nports; i++) {
- if (!IS_ERR(omap->utmi_clk[i]))
- clk_put(omap->utmi_clk[i]);
- if (!IS_ERR(omap->hsic60m_clk[i]))
- clk_put(omap->hsic60m_clk[i]);
- if (!IS_ERR(omap->hsic480m_clk[i]))
- clk_put(omap->hsic480m_clk[i]);
- }
-
- clk_put(omap->init_60m_fclk);
-
-err_init60m:
- clk_put(omap->xclk60mhsp2_ck);
-
-err_xclk60mhsp2:
- clk_put(omap->xclk60mhsp1_ck);
-
-err_xclk60mhsp1:
- clk_put(omap->utmi_p2_gfclk);
-
-err_p2_gfclk:
- clk_put(omap->utmi_p1_gfclk);
-
-err_p1_gfclk:
- if (!IS_ERR(omap->ehci_logic_fck))
- clk_put(omap->ehci_logic_fck);
-
err_mem:
pm_runtime_disable(dev);
@@ -847,27 +819,6 @@ static int usbhs_omap_remove_child(struct device *dev, void *data)
*/
static int usbhs_omap_remove(struct platform_device *pdev)
{
- struct usbhs_hcd_omap *omap = platform_get_drvdata(pdev);
- int i;
-
- for (i = 0; i < omap->nports; i++) {
- if (!IS_ERR(omap->utmi_clk[i]))
- clk_put(omap->utmi_clk[i]);
- if (!IS_ERR(omap->hsic60m_clk[i]))
- clk_put(omap->hsic60m_clk[i]);
- if (!IS_ERR(omap->hsic480m_clk[i]))
- clk_put(omap->hsic480m_clk[i]);
- }
-
- clk_put(omap->init_60m_fclk);
- clk_put(omap->utmi_p1_gfclk);
- clk_put(omap->utmi_p2_gfclk);
- clk_put(omap->xclk60mhsp2_ck);
- clk_put(omap->xclk60mhsp1_ck);
-
- if (!IS_ERR(omap->ehci_logic_fck))
- clk_put(omap->ehci_logic_fck);
-
pm_runtime_disable(&pdev->dev);
/* remove children */
--
1.8.3.2
next prev parent reply other threads:[~2014-02-12 10:19 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-02-12 10:18 [PATCH v7 00/12] USB Host support for OMAP5 uEVM Roger Quadros
2014-02-12 10:18 ` Roger Quadros [this message]
2014-02-14 9:57 ` [PATCH v7 01/12] mfd: omap-usb-host: Use resource managed clk_get() Lee Jones
2014-02-12 10:18 ` [PATCH v7 02/12] mfd: omap-usb-host: Get clocks based on hardware revision Roger Quadros
2014-02-14 10:07 ` Lee Jones
2014-02-14 11:12 ` Roger Quadros
2014-02-12 10:18 ` [PATCH v7 03/12] mfd: omap-usb-host: Use clock names as per function for reference clocks Roger Quadros
2014-02-14 10:09 ` Lee Jones
2014-02-14 13:12 ` Roger Quadros
2014-02-14 13:33 ` Lee Jones
2014-02-18 15:28 ` Roger Quadros
2014-02-18 16:07 ` Lee Jones
2014-02-12 10:18 ` [PATCH v7 04/12] mfd: omap-usb-host: Update DT clock binding information Roger Quadros
2014-02-12 10:18 ` [PATCH v7 05/12] mfd: omap-usb-tll: " Roger Quadros
2014-02-12 10:18 ` [PATCH v7 06/12] ARM: dts: omap4: Update omap-usb-host node Roger Quadros
2014-02-12 10:18 ` [PATCH v7 07/12] ARM: dts: omap5: " Roger Quadros
2014-02-12 10:18 ` [PATCH v7 08/12] ARM: dts: omap4-panda: Provide USB PHY clock Roger Quadros
2014-02-12 10:18 ` [PATCH v7 09/12] ARM: dts: omap5-uevm: " Roger Quadros
2014-02-12 10:18 ` [PATCH v7 10/12] ARM: OMAP2+: Remove legacy_init_ehci_clk() Roger Quadros
2014-02-12 10:18 ` [PATCH v7 11/12] ARM: dts: OMAP2+: Get rid of incompatible ids for USB host nodes Roger Quadros
2014-02-12 10:18 ` [PATCH v7 12/12] usb: omap: dts: Update DT binding example usage Roger Quadros
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1392200333-28397-2-git-send-email-rogerq@ti.com \
--to=rogerq@ti.com \
--cc=balbi@ti.com \
--cc=bcousson@baylibre.com \
--cc=devicetree@vger.kernel.org \
--cc=khilman@linaro.org \
--cc=lee.jones@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=nm@ti.com \
--cc=sameo@linux.intel.com \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome