mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Haiyang Zhang <haiyangz@microsoft.com>
To: davem@davemloft.net, netdev@vger.kernel.org
Cc: haiyangz@microsoft.com, kys@microsoft.com, olaf@aepfle.de,
	jasowang@redhat.com, linux-kernel@vger.kernel.org,
	driverdev-devel@linuxdriverproject.org
Subject: [PATCH net,v3] hyperv: Fix the carrier status setting
Date: Wed, 12 Feb 2014 16:54:27 -0800	[thread overview]
Message-ID: <1392252867-21146-1-git-send-email-haiyangz@microsoft.com> (raw)

Without this patch, the "cat /sys/class/net/ethN/operstate" shows
"unknown", and "ethtool ethN" shows "Link detected: yes", when VM
boots up with or without vNIC connected.

This patch fixed the problem.

Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: K. Y. Srinivasan <kys@microsoft.com>
---
 drivers/net/hyperv/netvsc_drv.c |   53 ++++++++++++++++++++++++++++-----------
 1 files changed, 38 insertions(+), 15 deletions(-)

diff --git a/drivers/net/hyperv/netvsc_drv.c b/drivers/net/hyperv/netvsc_drv.c
index 7756118..7141a19 100644
--- a/drivers/net/hyperv/netvsc_drv.c
+++ b/drivers/net/hyperv/netvsc_drv.c
@@ -88,8 +88,12 @@ static int netvsc_open(struct net_device *net)
 {
 	struct net_device_context *net_device_ctx = netdev_priv(net);
 	struct hv_device *device_obj = net_device_ctx->device_ctx;
+	struct netvsc_device *nvdev;
+	struct rndis_device *rdev;
 	int ret = 0;
 
+	netif_carrier_off(net);
+
 	/* Open up the device */
 	ret = rndis_filter_open(device_obj);
 	if (ret != 0) {
@@ -99,6 +103,11 @@ static int netvsc_open(struct net_device *net)
 
 	netif_start_queue(net);
 
+	nvdev = hv_get_drvdata(device_obj);
+	rdev = nvdev->extension;
+	if (!rdev->link_state)
+		netif_carrier_on(net);
+
 	return ret;
 }
 
@@ -229,23 +238,24 @@ void netvsc_linkstatus_callback(struct hv_device *device_obj,
 	struct net_device *net;
 	struct net_device_context *ndev_ctx;
 	struct netvsc_device *net_device;
+	struct rndis_device *rdev;
 
 	net_device = hv_get_drvdata(device_obj);
+	rdev = net_device->extension;
+
+	rdev->link_state = status != 1;
+
 	net = net_device->ndev;
 
-	if (!net) {
-		netdev_err(net, "got link status but net device "
-				"not initialized yet\n");
+	if (!net || net->reg_state != NETREG_REGISTERED)
 		return;
-	}
 
+	ndev_ctx = netdev_priv(net);
 	if (status == 1) {
-		netif_carrier_on(net);
-		ndev_ctx = netdev_priv(net);
 		schedule_delayed_work(&ndev_ctx->dwork, 0);
 		schedule_delayed_work(&ndev_ctx->dwork, msecs_to_jiffies(20));
 	} else {
-		netif_carrier_off(net);
+		schedule_delayed_work(&ndev_ctx->dwork, 0);
 	}
 }
 
@@ -388,17 +398,35 @@ static const struct net_device_ops device_ops = {
  * current context when receiving RNDIS_STATUS_MEDIA_CONNECT event. So, add
  * another netif_notify_peers() into a delayed work, otherwise GARP packet
  * will not be sent after quick migration, and cause network disconnection.
+ * Also, we update the carrier status here.
  */
-static void netvsc_send_garp(struct work_struct *w)
+static void netvsc_link_change(struct work_struct *w)
 {
 	struct net_device_context *ndev_ctx;
 	struct net_device *net;
 	struct netvsc_device *net_device;
+	struct rndis_device *rdev;
+	bool notify;
+
+	rtnl_lock();
 
 	ndev_ctx = container_of(w, struct net_device_context, dwork.work);
 	net_device = hv_get_drvdata(ndev_ctx->device_ctx);
+	rdev = net_device->extension;
 	net = net_device->ndev;
-	netdev_notify_peers(net);
+
+	if (rdev->link_state) {
+		netif_carrier_off(net);
+		notify = false;
+	} else {
+		netif_carrier_on(net);
+		notify = true;
+	}
+
+	rtnl_unlock();
+
+	if (notify)
+		netdev_notify_peers(net);
 }
 
 
@@ -414,13 +442,10 @@ static int netvsc_probe(struct hv_device *dev,
 	if (!net)
 		return -ENOMEM;
 
-	/* Set initial state */
-	netif_carrier_off(net);
-
 	net_device_ctx = netdev_priv(net);
 	net_device_ctx->device_ctx = dev;
 	hv_set_drvdata(dev, net);
-	INIT_DELAYED_WORK(&net_device_ctx->dwork, netvsc_send_garp);
+	INIT_DELAYED_WORK(&net_device_ctx->dwork, netvsc_link_change);
 	INIT_WORK(&net_device_ctx->work, do_set_multicast);
 
 	net->netdev_ops = &device_ops;
@@ -443,8 +468,6 @@ static int netvsc_probe(struct hv_device *dev,
 	}
 	memcpy(net->dev_addr, device_info.mac_adr, ETH_ALEN);
 
-	netif_carrier_on(net);
-
 	ret = register_netdev(net);
 	if (ret != 0) {
 		pr_err("Unable to register netdev.\n");
-- 
1.7.4.1


             reply	other threads:[~2014-02-13  0:03 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-02-13  0:54 Haiyang Zhang [this message]
2014-02-13  3:51 ` Jason Wang
2014-02-13 15:04   ` Haiyang Zhang
2014-02-14  2:19     ` Jason Wang
2014-02-14  5:37 ` David Miller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1392252867-21146-1-git-send-email-haiyangz@microsoft.com \
    --to=haiyangz@microsoft.com \
    --cc=davem@davemloft.net \
    --cc=driverdev-devel@linuxdriverproject.org \
    --cc=jasowang@redhat.com \
    --cc=kys@microsoft.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=olaf@aepfle.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®