mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Milo Kim <milo.kim@ti.com>
To: Lee Jones <lee.jones@linaro.org>,
	Jingoo Han <jg1.han@samsung.com>, Bryan Wu <cooloney@gmail.com>,
	Mark Brown <broonie@kernel.org>
Cc: <linux-kernel@vger.kernel.org>, <devicetree@vger.kernel.org>,
	Samuel Ortiz <sameo@linux.intel.com>, Milo Kim <milo.kim@ti.com>
Subject: [PATCH 00/10] Support TI Light Management Unit devices
Date: Fri, 14 Feb 2014 15:30:10 +0900	[thread overview]
Message-ID: <1392359410-6852-1-git-send-email-milo.kim@ti.com> (raw)

TI LMU (Lighting Management Unit) driver supports lighting devices such like
LM3532, LM3631, LM3633, LM3695 and LM3697.

         Enable pin  Backlights  PWM control  Light effects  Others
         ----------  ----------  -----------  -------------  ------
LM3532       Yes         Yes         Yes      ramp up/down
LM3631       Yes         Yes         Yes      slope          5 regulators
LM3633       Yes         Yes         Yes      ramp up/down   LEDs
                                              /pattern
LM3695       Yes         Yes         No
LM3697       Yes         Yes         Yes      ramp up/down

This patch-set consists of several parts below.

  TI LMU                : HW enable pin control. I2C register access
  TI LMU effect         : Light effect support for backlight and LED
  TI LMU backlight      : Backlight subsystem, PWM, control bank assignment
  Each backlight driver : Chip dependent code
  LM3633 LED            : LED subsystem, pattern generation
  LM3631 regulator      : Regulator drivers for the display bias

Device tree documentation is also included.

Milo Kim (10):
  mfd: Add TI LMU driver
  backlight: Add TI LMU backlight common driver
  backlight: ti-lmu-backlight: Add LM3532 driver
  backlight: ti-lmu-backlight: Add LM3631 driver
  backlight: ti-lmu-backlight: Add LM3633 driver
  backlight: ti-lmu-backlight: Add LM3695 driver
  backlight: ti-lmu-backlight: Add LM3697 driver
  leds: Add LM3633 driver
  regulator: Add LM3631 driver
  Documentation: Add device tree bindings for TI LMU devices

 .../devicetree/bindings/leds/leds-lm3633.txt       |   39 ++
 Documentation/devicetree/bindings/mfd/ti-lmu.txt   |  182 ++++++
 .../bindings/regulator/lm3631-regulator.txt        |   49 ++
 .../bindings/video/backlight/ti-lmu-backlight.txt  |  127 ++++
 Documentation/leds/leds-lm3633.txt                 |   38 ++
 drivers/leds/Kconfig                               |   10 +
 drivers/leds/Makefile                              |    1 +
 drivers/leds/leds-lm3633.c                         |  661 ++++++++++++++++++++
 drivers/mfd/Kconfig                                |   12 +
 drivers/mfd/Makefile                               |    1 +
 drivers/mfd/ti-lmu-effect.c                        |  328 ++++++++++
 drivers/mfd/ti-lmu.c                               |  464 ++++++++++++++
 drivers/regulator/Kconfig                          |    8 +
 drivers/regulator/Makefile                         |    1 +
 drivers/regulator/lm3631-regulator.c               |  285 +++++++++
 drivers/video/backlight/Kconfig                    |   51 ++
 drivers/video/backlight/Makefile                   |    6 +
 drivers/video/backlight/lm3532_bl.c                |  240 +++++++
 drivers/video/backlight/lm3631_bl.c                |  186 ++++++
 drivers/video/backlight/lm3633_bl.c                |  244 ++++++++
 drivers/video/backlight/lm3695_bl.c                |  143 +++++
 drivers/video/backlight/lm3697_bl.c                |  224 +++++++
 drivers/video/backlight/ti-lmu-backlight.c         |  369 +++++++++++
 drivers/video/backlight/ti-lmu-backlight.h         |   78 +++
 include/linux/mfd/ti-lmu-effect.h                  |  109 ++++
 include/linux/mfd/ti-lmu-register.h                |  269 ++++++++
 include/linux/mfd/ti-lmu.h                         |  150 +++++
 27 files changed, 4275 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/leds/leds-lm3633.txt
 create mode 100644 Documentation/devicetree/bindings/mfd/ti-lmu.txt
 create mode 100644 Documentation/devicetree/bindings/regulator/lm3631-regulator.txt
 create mode 100644 Documentation/devicetree/bindings/video/backlight/ti-lmu-backlight.txt
 create mode 100644 Documentation/leds/leds-lm3633.txt
 create mode 100644 drivers/leds/leds-lm3633.c
 create mode 100644 drivers/mfd/ti-lmu-effect.c
 create mode 100644 drivers/mfd/ti-lmu.c
 create mode 100644 drivers/regulator/lm3631-regulator.c
 create mode 100644 drivers/video/backlight/lm3532_bl.c
 create mode 100644 drivers/video/backlight/lm3631_bl.c
 create mode 100644 drivers/video/backlight/lm3633_bl.c
 create mode 100644 drivers/video/backlight/lm3695_bl.c
 create mode 100644 drivers/video/backlight/lm3697_bl.c
 create mode 100644 drivers/video/backlight/ti-lmu-backlight.c
 create mode 100644 drivers/video/backlight/ti-lmu-backlight.h
 create mode 100644 include/linux/mfd/ti-lmu-effect.h
 create mode 100644 include/linux/mfd/ti-lmu-register.h
 create mode 100644 include/linux/mfd/ti-lmu.h

-- 
1.7.9.5


             reply	other threads:[~2014-02-14  6:30 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-02-14  6:30 Milo Kim [this message]
2014-02-14 10:14 ` Lee Jones
2014-02-16 23:51   ` Milo Kim

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1392359410-6852-1-git-send-email-milo.kim@ti.com \
    --to=milo.kim@ti.com \
    --cc=broonie@kernel.org \
    --cc=cooloney@gmail.com \
    --cc=devicetree@vger.kernel.org \
    --cc=jg1.han@samsung.com \
    --cc=lee.jones@linaro.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=sameo@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®