Re: [PATCH RFC 1/2] net: macb: Check DMA mappings for error

[Ben Hutchings <ben@decadent.org.uk>]

[-- Attachment #1: Type: text/plain, Size: 1458 bytes --]

On Fri, 2014-02-21 at 11:30 -0800, Soren Brinkmann wrote:
[...]
> --- a/drivers/net/ethernet/cadence/macb.c
> +++ b/drivers/net/ethernet/cadence/macb.c
> @@ -632,11 +632,16 @@ static void gem_rx_refill(struct macb *bp)
>  					   "Unable to allocate sk_buff\n");
>  				break;
>  			}
> -			bp->rx_skbuff[entry] = skb;
>  
>  			/* now fill corresponding descriptor entry */
>  			paddr = dma_map_single(&bp->pdev->dev, skb->data,
>  					       bp->rx_buffer_size, DMA_FROM_DEVICE);
> +			if (dma_mapping_error(&bp->pdev->dev, paddr)) {
> +				dev_kfree_skb(skb);
> +				break;
> +			}
> +
> +			bp->rx_skbuff[entry] = skb;

This bit looks good.

>  			if (entry == RX_RING_SIZE - 1)
>  				paddr |= MACB_BIT(RX_WRAP);
> @@ -1040,6 +1045,10 @@ static int macb_start_xmit(struct sk_buff *skb, struct net_device *dev)
>  	netdev_vdbg(bp->dev, "Allocated ring entry %u\n", entry);
>  	mapping = dma_map_single(&bp->pdev->dev, skb->data,
>  				 len, DMA_TO_DEVICE);
> +	if (dma_mapping_error(&bp->pdev->dev, mapping)) {
> +		dev_kfree_skb(skb);

You need to unlock bp->lock before returning.  Also, I think this should
be kfree_skb(), as that can be observed through dropwatch whereas
dev_kfree_skb() is completely silent.

Ben.

> +		return NETDEV_TX_OK;
> +	}
>  
>  	tx_skb = &bp->tx_skb[entry];
>  	tx_skb->skb = skb;

-- 
Ben Hutchings
All the simple programs have been written, and all the good names taken.

[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 811 bytes --]