From: Jiri Slaby <jslaby@suse.cz>
To: rostedt@goodmis.org
Cc: jirislaby@gmail.com, linux-kernel@vger.kernel.org,
Jiri Slaby <jslaby@suse.cz>,
Frederic Weisbecker <fweisbec@gmail.com>,
Ingo Molnar <mingo@redhat.com>
Subject: [PATCH v2 1/6] ftrace: Cleanup of global variables
Date: Mon, 24 Feb 2014 19:59:56 +0100 [thread overview]
Message-ID: <1393268401-24379-1-git-send-email-jslaby@suse.cz> (raw)
Some of them can be local to functions, so make them local and pass
them as parameters where needed:
* __start_mcount_loc+__stop_mcount_loc are local to ftrace_init
* ftrace_new_pgs -> new_pgs/start_pg
* ftrace_update_cnt -> local update_cnt in ftrace_update_code
[v2]
- leave time stamps alone for now
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
---
kernel/trace/ftrace.c | 25 ++++++++-----------------
1 file changed, 8 insertions(+), 17 deletions(-)
diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c
index 5313c1100d30..3f95bbeb8e8d 100644
--- a/kernel/trace/ftrace.c
+++ b/kernel/trace/ftrace.c
@@ -1174,8 +1174,6 @@ struct ftrace_page {
int size;
};
-static struct ftrace_page *ftrace_new_pgs;
-
#define ENTRY_SIZE sizeof(struct dyn_ftrace)
#define ENTRIES_PER_PAGE (PAGE_SIZE / ENTRY_SIZE)
@@ -2246,7 +2244,6 @@ static void ftrace_shutdown_sysctl(void)
}
static cycle_t ftrace_update_time;
-static unsigned long ftrace_update_cnt;
unsigned long ftrace_update_tot_cnt;
static inline int ops_traces_mod(struct ftrace_ops *ops)
@@ -2302,11 +2299,12 @@ static int referenced_filters(struct dyn_ftrace *rec)
return cnt;
}
-static int ftrace_update_code(struct module *mod)
+static int ftrace_update_code(struct module *mod, struct ftrace_page *new_pgs)
{
struct ftrace_page *pg;
struct dyn_ftrace *p;
cycle_t start, stop;
+ unsigned long update_cnt = 0;
unsigned long ref = 0;
bool test = false;
int i;
@@ -2332,9 +2330,8 @@ static int ftrace_update_code(struct module *mod)
}
start = ftrace_now(raw_smp_processor_id());
- ftrace_update_cnt = 0;
- for (pg = ftrace_new_pgs; pg; pg = pg->next) {
+ for (pg = new_pgs; pg; pg = pg->next) {
for (i = 0; i < pg->index; i++) {
int cnt = ref;
@@ -2355,7 +2352,7 @@ static int ftrace_update_code(struct module *mod)
if (!ftrace_code_disable(mod, p))
break;
- ftrace_update_cnt++;
+ update_cnt++;
/*
* If the tracing is enabled, go ahead and enable the record.
@@ -2374,11 +2371,9 @@ static int ftrace_update_code(struct module *mod)
}
}
- ftrace_new_pgs = NULL;
-
stop = ftrace_now(raw_smp_processor_id());
ftrace_update_time = stop - start;
- ftrace_update_tot_cnt += ftrace_update_cnt;
+ ftrace_update_tot_cnt += update_cnt;
return 0;
}
@@ -4270,9 +4265,6 @@ static int ftrace_process_locs(struct module *mod,
/* Assign the last page to ftrace_pages */
ftrace_pages = pg;
- /* These new locations need to be initialized */
- ftrace_new_pgs = start_pg;
-
/*
* We only need to disable interrupts on start up
* because we are modifying code that an interrupt
@@ -4283,7 +4275,7 @@ static int ftrace_process_locs(struct module *mod,
*/
if (!mod)
local_irq_save(flags);
- ftrace_update_code(mod);
+ ftrace_update_code(mod, start_pg);
if (!mod)
local_irq_restore(flags);
ret = 0;
@@ -4392,11 +4384,10 @@ struct notifier_block ftrace_module_exit_nb = {
.priority = INT_MIN, /* Run after anything that can remove kprobes */
};
-extern unsigned long __start_mcount_loc[];
-extern unsigned long __stop_mcount_loc[];
-
void __init ftrace_init(void)
{
+ extern unsigned long __start_mcount_loc[];
+ extern unsigned long __stop_mcount_loc[];
unsigned long count, addr, flags;
int ret;
--
1.8.5.2
next reply other threads:[~2014-02-24 19:00 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-02-24 18:59 Jiri Slaby [this message]
2014-02-24 18:59 ` [PATCH v2 2/6] ftrace: Inline the code from ftrace_dyn_table_alloc Jiri Slaby
2014-02-24 18:59 ` [PATCH v2 3/6] ftrace: Pass retval through return in ftrace_dyn_arch_init Jiri Slaby
2014-02-24 18:59 ` [PATCH v2 4/6] ftrace: Do not pass data to ftrace_dyn_arch_init Jiri Slaby
2014-02-24 19:00 ` [PATCH v2 5/6] ftrace: Remove freelist from struct dyn_ftrace Jiri Slaby
2014-02-24 19:00 ` [PATCH v2 6/6] ftrace: Fix compilation warning about control_ops_free Jiri Slaby
2014-03-06 20:31 ` Steven Rostedt
2014-03-10 20:42 ` Jiri Slaby
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1393268401-24379-1-git-send-email-jslaby@suse.cz \
--to=jslaby@suse.cz \
--cc=fweisbec@gmail.com \
--cc=jirislaby@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@redhat.com \
--cc=rostedt@goodmis.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®