From: Markus Mayer <markus.mayer@linaro.org>
To: Matt Porter <matt.porter@linaro.org>,
Christian Daudt <bcm@fixthebug.org>
Cc: ARM Kernel List <linux-arm-kernel@lists.infradead.org>,
"Linux Kernel Mailing List" <linux-kernel@vger.kernel.org>
Subject: [PATCH 2/4] ARM: bcm281xx: Consolidate reboot code
Date: Tue, 25 Feb 2014 14:17:44 -0800 [thread overview]
Message-ID: <1393366666-28625-3-git-send-email-markus.mayer@linaro.org> (raw)
In-Reply-To: <1393366666-28625-1-git-send-email-markus.mayer@linaro.org>
Consolidate reboot code and remove unnecessary functions.
Signed-off-by: Markus Mayer <markus.mayer@linaro.org>
---
arch/arm/mach-bcm/board_bcm281xx.c | 46 ++++++++++++++++++++++++---------
arch/arm/mach-bcm/kona.c | 50 ------------------------------------
arch/arm/mach-bcm/kona.h | 4 ---
3 files changed, 34 insertions(+), 66 deletions(-)
diff --git a/arch/arm/mach-bcm/board_bcm281xx.c b/arch/arm/mach-bcm/board_bcm281xx.c
index 4874f56..e0d0bc5e 100644
--- a/arch/arm/mach-bcm/board_bcm281xx.c
+++ b/arch/arm/mach-bcm/board_bcm281xx.c
@@ -1,5 +1,5 @@
/*
- * Copyright (C) 2012-2013 Broadcom Corporation
+ * Copyright (C) 2012-2014 Broadcom Corporation
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
@@ -19,25 +19,47 @@
#include "kona.h"
-static void bcm_board_setup_restart(void)
+#define SECWDOG_OFFSET 0x00000000
+#define SECWDOG_RESERVED_MASK 0xe2000000
+#define SECWDOG_WD_LOAD_FLAG_MASK 0x10000000
+#define SECWDOG_EN_MASK 0x08000000
+#define SECWDOG_SRSTEN_MASK 0x04000000
+#define SECWDOG_CLKS_SHIFT 20
+#define SECWDOG_COUNT_SHIFT 0
+
+static void bcm281xx_restart(enum reboot_mode mode, const char *cmd)
{
- struct device_node *np;
+ uint32_t val;
+ void __iomem *base;
+ struct device_node *np_wdog;
- np = of_find_compatible_node(NULL, NULL, "brcm,bcm11351");
- if (np) {
- if (of_device_is_available(np))
- bcm_kona_setup_restart();
- of_node_put(np);
+ np_wdog = of_find_compatible_node(NULL, NULL, "brcm,kona-wdt");
+ if (!np_wdog) {
+ pr_emerg("Couldn't find brcm,kona-wdt\n");
+ return;
+ }
+ base = of_iomap(np_wdog, 0);
+ if (!base) {
+ pr_emerg("Couldn't map brcm,kona-wdt\n");
+ return;
}
- /* Restart setup for other boards goes here */
+
+ /* Enable watchdog with short timeout (244us). */
+ val = readl(base + SECWDOG_OFFSET);
+ val &= SECWDOG_RESERVED_MASK | SECWDOG_WD_LOAD_FLAG_MASK;
+ val |= SECWDOG_EN_MASK | SECWDOG_SRSTEN_MASK |
+ (0x15 << SECWDOG_CLKS_SHIFT) |
+ (0x8 << SECWDOG_COUNT_SHIFT);
+ writel(val, base + SECWDOG_OFFSET);
+
+ /* Wait for reset */
+ while (1);
}
static void __init board_init(void)
{
of_platform_populate(NULL, of_default_bus_match_table, NULL,
&platform_bus);
-
- bcm_board_setup_restart();
kona_l2_cache_init();
}
@@ -45,6 +67,6 @@ static const char * const bcm11351_dt_compat[] = { "brcm,bcm11351", NULL, };
DT_MACHINE_START(BCM11351_DT, "BCM281xx Broadcom Application Processor")
.init_machine = board_init,
- .restart = bcm_kona_restart,
+ .restart = bcm281xx_restart,
.dt_compat = bcm11351_dt_compat,
MACHINE_END
diff --git a/arch/arm/mach-bcm/kona.c b/arch/arm/mach-bcm/kona.c
index 2f1db29..768bc28 100644
--- a/arch/arm/mach-bcm/kona.c
+++ b/arch/arm/mach-bcm/kona.c
@@ -11,10 +11,8 @@
* GNU General Public License for more details.
*/
-#include <linux/of_address.h>
#include <linux/of_platform.h>
#include <asm/hardware/cache-l2x0.h>
-#include <asm/io.h>
#include "bcm_kona_smc.h"
#include "kona.h"
@@ -43,51 +41,3 @@ void __init kona_l2_cache_init(void)
if (ret)
pr_err("Couldn't enable L2 cache: %d\n", ret);
}
-
-static void __iomem *watchdog_base;
-
-void bcm_kona_setup_restart(void)
-{
- struct device_node *np_wdog;
-
- /*
- * The assumption is that whoever calls bcm_kona_setup_restart()
- * also needs a Kona Watchdog Timer entry in Device Tree, i.e. we
- * report an error if the DT entry is missing.
- */
- np_wdog = of_find_compatible_node(NULL, NULL, "brcm,kona-wdt");
- if (!np_wdog) {
- pr_err("brcm,kona-wdt not found in DT, reboot disabled\n");
- return;
- }
- watchdog_base = of_iomap(np_wdog, 0);
- WARN(!watchdog_base, "failed to map watchdog base");
- of_node_put(np_wdog);
-}
-
-#define SECWDOG_OFFSET 0x00000000
-#define SECWDOG_RESERVED_MASK 0xE2000000
-#define SECWDOG_WD_LOAD_FLAG_MASK 0x10000000
-#define SECWDOG_EN_MASK 0x08000000
-#define SECWDOG_SRSTEN_MASK 0x04000000
-#define SECWDOG_CLKS_SHIFT 20
-#define SECWDOG_LOCK_SHIFT 0
-
-void bcm_kona_restart(enum reboot_mode mode, const char *cmd)
-{
- uint32_t val;
-
- if (!watchdog_base)
- panic("Watchdog not mapped. Reboot failed.\n");
-
- /* Enable watchdog2 with very short timeout. */
- val = readl(watchdog_base + SECWDOG_OFFSET);
- val &= SECWDOG_RESERVED_MASK | SECWDOG_WD_LOAD_FLAG_MASK;
- val |= SECWDOG_EN_MASK | SECWDOG_SRSTEN_MASK |
- (0x8 << SECWDOG_CLKS_SHIFT) |
- (0x8 << SECWDOG_LOCK_SHIFT);
- writel(val, watchdog_base + SECWDOG_OFFSET);
-
- while (1)
- ;
-}
diff --git a/arch/arm/mach-bcm/kona.h b/arch/arm/mach-bcm/kona.h
index f42aef8..3a7a017 100644
--- a/arch/arm/mach-bcm/kona.h
+++ b/arch/arm/mach-bcm/kona.h
@@ -11,8 +11,4 @@
* GNU General Public License for more details.
*/
-#include <linux/reboot.h>
-
void __init kona_l2_cache_init(void);
-void bcm_kona_setup_restart(void);
-void bcm_kona_restart(enum reboot_mode mode, const char *cmd);
--
1.7.9.5
next prev parent reply other threads:[~2014-02-25 22:18 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-02-25 22:17 [PATCH 0/4] ARM: bcm281xx: Consolidate code Markus Mayer
2014-02-25 22:17 ` [PATCH 1/4] ARM: bcm281xx: Move kona_l2_cache_init() so it can be shared Markus Mayer
2014-02-25 22:17 ` Markus Mayer [this message]
2014-02-25 22:17 ` [PATCH 3/4] ARM: bcm281xx: Re-order hearder files Markus Mayer
2014-02-25 22:17 ` [PATCH 4/4] ARM: bcm281xx: Rename board_init() function Markus Mayer
2014-03-06 8:55 ` [PATCH 0/4] ARM: bcm281xx: Consolidate code Matt Porter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1393366666-28625-3-git-send-email-markus.mayer@linaro.org \
--to=markus.mayer@linaro.org \
--cc=bcm@fixthebug.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=matt.porter@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®